Jesmonite AC730 silver bronze metal - Barcelona Gaudí Tile

Подписаться 399

Просмотров 17 тыс.

50% 1

Videotutorial of Jesmonite AC730 Silver Bronze Metal, in silicone mold RTV Silgrey.
The famous Passeig de Gràcia tile designed by Gaudí, in silver metal Jesmonite finish.
Contact www.resineco.com for more information on the entire JESMONITE product range.
Jesmonite AC730 Metal:
tienda.resineco.com/resinajes...
Silicone for SILGREY mold:
tienda.resineco.com/siliconam...
We will be happy to help you and receive comments!
If you like it, share it!

Опубликовано:

17 июл 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@daniilmaydanov8667 3 года назад

Super, just super.

@GiuliaMadonia 4 года назад

Hi, is it possible to use a chemical patina on the surface?

@loopyshaw8745 3 года назад

Can anyone advise ? Do you need the Quadaxial Fabric Glass for small 4" -6" tiles

@pierinasanchezkong4865 4 года назад

Hola, algun otro material similar a Jesmonite a100? no lo puedo enccontrar en Estados Unidos

@hskriker1 6 лет назад

Which brush attachment are you using to polish? Thanks

@resineco 5 лет назад

we use a regular iron wool by hand after an intensive polish with Nylon fiber abrasive wheel for sanding wood and metal surfaces. 6 mm shank, 240 grit

@Lilione111 6 лет назад

Hi, can the metal gel coats be used in conjunction with AC100?. Thank you.

@resineco 6 лет назад

It is possible, and it works great, but in large surfaces or big pieces, We would recommend to use it in conjunction with AC730, because is more compatible.

@resineco 5 лет назад

It is possible, but we highly recommend to back the metal gelcoats with AC730 stone, to ensure stability and bonding. I would recommend to use AC100 only for indoor small pieces, if AC30 is not available.

@Lilione111 6 лет назад

Thanks! I'm working with small decorative objects & want a smooth backing. I believe AC730 has a rough finish, granite effect?

@resineco 6 лет назад

AC730 has a rough finish but you can sand and polish it to achieve smooth surfaces. But you can test with AC100 that is easier and faster to work with.

@Lilione111 6 лет назад

resineco thanks.

@ianfong1000 2 года назад

You're flex metal looks much thinner than when I use it. It's really thick if I use their ratios. Also how long do you leave it to cure before polishing?

@resineco 2 года назад

Hi! AC730 must be thick, but if you need to apply it thinner, add a few drops of AC730 liquids until the desired viscosity. Be aware that it will be more shinny if is thicker due to higher content of metal filler. leave it for 72h before polishing. this is important. AC730 must be completely dry before polishing.

@ianfong1000 2 года назад

@@resineco you mean the flex metal liquids, not ac730 liquid? So I guess what you're saying is don't dilute the flex metal too much and to leave it 72 hours before polishing?

@resineco 2 года назад

@@ianfong1000 Yes, I wanted to say AC730 flex metal liquid. you can dilute the mix enough to achieve desired viscosity, but be aware that the best is to keep the right mixing ratio as much as possible. But a few drops will help a lot. And leave it 72h before polishing.

@rociodominguez242 3 года назад

Hi! I am a beginner with Jesmonite. Do you need the fiberglass in between the 2 layers or can you do the piece without it? What is the purpose of the fiberglass? Thanks!

@gaillobelrand7185 3 года назад

The fiberglass is to reinforce the tile.

@michaelpearson1272 Год назад

You can mix chopped strand mat in with the back up if you wish.

@michaelpearson1272 Год назад

I'm impressed with the silver metal look. I've used the metal powders with polyesters and polyurethane resins. I used brasso to help shine it up and it works a treat.

@michaelpearson1272 Год назад

It depends on what you are doing with it. What you are making etc. If its a wall panel then make it stronger. If it's a solid ornament then you won't need to add fibreglass unless it has very thin parts sticking out you want to make stronger.

@jimenagutierrez7501 5 лет назад

Hola, donde podría conseguir ese molde? Soy de Argentina y no puedo localizarlo. Gracias!

@resineco 5 лет назад

El molde lo hemos fabricado nosotros con silicona SILGREY, a partir de una baldosa comprada en una tienda de cerámica. , en una busqueda rápida por internet, hemos visto que la podrias comprar la baldosa aqui www.casabatllostore.com/es/baldosa-passeig-de-gracia y ya le haces tu e molde en Argentina..

@AnaRitaQuaresma 3 года назад

Where can I get a mold like that?

@resineco 3 года назад

Hi, we have made this mould by ourselves using a tile. you can buy tiles from some suppliers and make your own silicone mold with RTV SILGREY we have a video that shows the process ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jwVUO7ZUMKk.html