Тёмный

Jewelry Design | Modeling a Signet Ring in Blender [Tutorial] 

Grace Note Forge
Подписаться 14 тыс.
Просмотров 72 тыс.
50% 1

Опубликовано:

 

29 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 122   
@Ilikemakingthings
@Ilikemakingthings 8 месяцев назад
Two years and still a really easy to follow, useful and helpful video. Thanks!
@torikuproduccionesmx
@torikuproduccionesmx 4 дня назад
Amazing tutorial. We're following along with our team. Thanks for shaing!
@MortyJoe44
@MortyJoe44 4 месяца назад
i'm planning on getting started making my own jewellery, and tutorials like this are so invaluable for folks like me that are just getting familiar with 3d modelling, thanks for posting!
@GraceNoteForge
@GraceNoteForge 4 месяца назад
That's great to hear! Thank you for watching and best of luck on your jewelry making journey! 😁
@mycelleismybffl
@mycelleismybffl 2 года назад
I can honestly say this was the best jewelry tutorial for blender i have seen so far. thank you so much!!!
@GraceNoteForge
@GraceNoteForge 2 года назад
Thank you! I really appreciate that. I'm glad it helped 😁
@mycelleismybffl
@mycelleismybffl 2 года назад
@@GraceNoteForge please continue with the tutorials! i'm literally hoping to learn from your vids!
@zillaquazar
@zillaquazar Год назад
your video helped me a lot, i needed a ring that goes round at the top and i had no idea it would be as hard as it has been
@GraceNoteForge
@GraceNoteForge Год назад
Glad to hear that it helped 👍😊
@jhsherwood97
@jhsherwood97 2 года назад
This was so helpful! I've been trying to learn how to design my own rings in Blender, and this tutorial was just what I needed. Thank you!
@GraceNoteForge
@GraceNoteForge 2 года назад
Im glad it helped! Thank you for watching 😊
@FainneOChroi
@FainneOChroi Год назад
Great video. Just in case anyone has the same question I did at the end: If apply is greyed out you are probably still in edit mode. Go to object mode and it should work.
@serenajuhuisuh
@serenajuhuisuh 7 месяцев назад
So awesome, would love to see more of these from you!
@GraceNoteForge
@GraceNoteForge 7 месяцев назад
Thank you! I just released another ring tutorial today! 😁
@FaddyVFX
@FaddyVFX 3 года назад
Here the community is very supportive, i learned alot, and your channel is no exception, eveey video is a new things to leaen, i wish you successful journey.
@GraceNoteForge
@GraceNoteForge 3 года назад
Thank you so much! I'm glad you are enjoying the content. 😊
@abasis.baruti9819
@abasis.baruti9819 2 года назад
This video is hands down the best one out there for a beginner like me. Its far and away better than the tutorials produced by a self-proclaimed master! This "master" is definitely good at blender, but he is a rank amateur when it comes to teaching. You, on the other hand, teach with such grace that my confidence and ability with blender has doubled, at the very least. I promised to send you my work when I finished it and I still intend to. Thanks for every second of time you've put into these videos. If you never do another one, you will have helped me get past the utter confusion and frustration I was drowning in just a few weeks ago. Live forever.
@GraceNoteForge
@GraceNoteForge 2 года назад
Thank you so much! That really means a lot 😁 Cant wait to see your work!
@zrHer
@zrHer 2 года назад
Awesome tutorial, I was ripping my hair out over other Signet Ring tutorials on youtube but this was the only one that made sense to me. Detailed and descriptive, nice job dude.
@GraceNoteForge
@GraceNoteForge 2 года назад
Thank you! I'm glad it was helpful 😁
@one.0921
@one.0921 2 года назад
Thank you very very much for this tutorial.... It changed my first steeps with Blender... Big up from France... Free your Soul 🤙
@GraceNoteForge
@GraceNoteForge 2 года назад
Thank you! I'm happy it helped 👍
@annabellemohamed7802
@annabellemohamed7802 2 месяца назад
Thank you for this tutorial!
@GraceNoteForge
@GraceNoteForge 2 месяца назад
Happy it helped! 😃
@BENBASIL
@BENBASIL 2 года назад
I know I already fan-boyed on your last video, but seriously, your videos kick so much ass. Super easy to follow along but I’m actually learning what you are doing and why. And I am COMPLETELY new to Blender, nor have I used CAD for 12+ years. Your videos have already made 3D modeling way less intimidating. I really appreciate you making these 🤘🏼
@GraceNoteForge
@GraceNoteForge 2 года назад
Thank you so much! That's great to hear 😃 I'm happy they are helpful.
@WhyWeWatch1
@WhyWeWatch1 2 года назад
Thank You! Making a Green Lantern Ring, and this helped a lot
@GraceNoteForge
@GraceNoteForge 2 года назад
Awesome! Happy to help. I've always wanted to try a Green Lantern ring lol
@Torfka1
@Torfka1 Год назад
Thank you for the lesson. Very easy to understand.
@reel907
@reel907 2 года назад
Grace Note Forge Not sure how long you’ve been at this but you have it down! I am a jeweler, and all my creations are customize through rolling and shaping my metals and soldering them together. I know CAD/3D is the new thing and I would like to learn. CAD/3D can do things that would take me weeks to months to create. I was asked to create a tiara ring for the winners of Mrs Alaska and have a partial re-creation I have carved in wax but have access to a 3D printer
@GraceNoteForge
@GraceNoteForge 2 года назад
Thank you! I've been practicing 3D modeling for years now but I'm still pretty new to jewelry modeling/printing. 3D modeling a tiara ring sounds like a really cool challenge!
@faithmeditationofficial
@faithmeditationofficial 5 месяцев назад
im having trouble at 9:22, when i try and move on the Y axis only one side moves out, and the other looks distorted.
@krissosful
@krissosful Год назад
Wow, nicely done. The only thing remaining is proceed it directly to a 3d printer. Thanks a lot for the tutorial. Already subscribed:)
@GraceNoteForge
@GraceNoteForge Год назад
Thank you so much! 😁
@nyomansuardina6270
@nyomansuardina6270 2 года назад
I'm very excited to learn with this tutorial, very practical and very helpful , amazing tutorial. Thank You!
@GraceNoteForge
@GraceNoteForge 2 года назад
Thank you so much!
@PeshkaNavalnogo
@PeshkaNavalnogo 2 месяца назад
thanks a lot!!
@victorgomezsa
@victorgomezsa 11 месяцев назад
Thank you very much!!! Very helpful!!!👏
@Originallyright
@Originallyright 11 месяцев назад
Thank you for sharing 😊
@hubertrzepecki2263
@hubertrzepecki2263 3 года назад
perfect lesson, we want more
@GraceNoteForge
@GraceNoteForge 3 года назад
Thank you! ill be sure to post more tutorials when I can.
@alexhummel1320
@alexhummel1320 10 месяцев назад
super helpful bro thank you
@kotmakcep8769
@kotmakcep8769 3 года назад
strange but simple modeling technique. interesting. but I prefer to make the rings through the curve modifier. then there is a possibility of resizing with less problems
@abasis.baruti9819
@abasis.baruti9819 2 года назад
I've used this tutorial to design a ring that is something like a low medium complexity. I actually had to go back and resize and I didn't have any issues with the physical outcome. Tell me, what problems do you foresee with this method? Genuinely curious.
@kotmakcep8769
@kotmakcep8769 2 года назад
@@abasis.baruti9819 well, for example. you need to make sizes from 16 to 23mm for mass production, they should be the same, differ only in size. plus in the video it's just a blank, and if you add decors. this is where the problems start. BUT for a single item, this method is probably the easiest and fastest
@abasis.baruti9819
@abasis.baruti9819 2 года назад
@@kotmakcep8769 thanks for the reply. Definitely something to keep in mind. What other method would you recommend? Hungry for knowledge.
@kotmakcep8769
@kotmakcep8769 2 года назад
@@abasis.baruti9819 complex and voluminous topic. blender gives very great opportunities for paremtric modeling. A lot is automated in the Jewelcraft addon. but I recommend understanding how they work, a lot is done simply by adding modifiers, constraints, drivers, and of course their combinations. can't describe in a nutshell
@abasis.baruti9819
@abasis.baruti9819 2 года назад
@@kotmakcep8769 I catch your drift. I started with a uDemy course that focused solely on parametric objects.
@sejaaguia8020
@sejaaguia8020 2 года назад
Thank you so much for sharing!
@Uzumaki350125
@Uzumaki350125 9 месяцев назад
Very good tutorial, really made sense to me as a newbie. I'm looking to design some box ring constructions in Blender to give me patterns to cut out of sheet metal, do you know if there's a way of printing off the surface of the Ring to do something like that? Then with your tutorial I'll have everything I need 😊
@外国文化保存会議
@外国文化保存会議 2 года назад
wow this is amazing thanks so much
@GraceNoteForge
@GraceNoteForge 2 года назад
Thank you for watching! 😁
@GForge1967
@GForge1967 3 года назад
Great tutorial, been struggling with blender this helps a lot so thank you also are you self taught with blender on did you do a course
@GraceNoteForge
@GraceNoteForge 3 года назад
Thank you! I'm happy it helped. I am self taught when it comes to Blender :)
@Cap_Laberinto
@Cap_Laberinto 2 года назад
Very good result man!
@zaizai7974
@zaizai7974 2 года назад
Hey man! Your content is great but I am struggling at 6:40. No matter what I seem to do when I try to make the top part of the ring of the ring bigger using G, S and even E it changes the shape of the entire ring instead. What can I do?
@northernfrost
@northernfrost 2 года назад
is your proportional editing on? it should be off.
@Cloudyyyy88
@Cloudyyyy88 4 месяца назад
Do you have any idea on how i could model a signet ring, and then change the internal ring size, while keeping the ring thickness and top size the same, if that makes sense
@GraceNoteForge
@GraceNoteForge 4 месяца назад
The best way I've found so far is to use a lattice modifier and increase the resolution to have more control points. Then you can scale the whole thing up or down and adjust the top points for a different thickness. It takes a bit of tweaking sometimes but has worked well for me. 👍
@Cloudyyyy88
@Cloudyyyy88 3 месяца назад
@@GraceNoteForge thanks so much for the response, iill give it a go
@Cloudyyyy88
@Cloudyyyy88 3 месяца назад
@@GraceNoteForge also i have noticed using subdiv modifier, it makes the internal size of the ring smaller, as its smoothing it all out, is there anyway to avoid this? adding loop cuts and creases hasnt seemed to help
@ttanizawa901
@ttanizawa901 11 месяцев назад
I'm a bit confused on scale. When you start off modeling this you specifically say "millimeters" but it's set in meters.
@benhurisksal1964
@benhurisksal1964 Год назад
Thank you very much for your content! I would appreciate your help on 02:50. How to make the influence circle larger when I dont have a mouse?
@getinmybelly4ever
@getinmybelly4ever Год назад
if you're using a trackpad, scroll up using two fingers the same way you would scroll a webpage
@victorgomezsa
@victorgomezsa 11 месяцев назад
By the way, what would be the best technique/tools in Blender to place a logo or a small text on the top base of the ring and make it look embossed? Thanks in advance!
@MAJAY-tv8nu
@MAJAY-tv8nu Год назад
I have a problem at 6:30, when I click G+Z it doesn't bring up the thickness, but rather it moves everything up...
@AnnaAscends
@AnnaAscends Год назад
I'm having the same issues too
@AnnaAscends
@AnnaAscends Год назад
fixed. turning portional editing off - comment mentioned earlier vvv
@Dan-t8w2z
@Dan-t8w2z Месяц назад
when I add the subdivision surface modifier i get what looks like a split in the very top and bottom, where as your goes smooth straight away, any fix?
@willanski4321
@willanski4321 19 дней назад
I get this exact same issue - did you fix it??
@ODVINE
@ODVINE 19 дней назад
No haven’t managed to fix it, I now make signets with a different technique
@willanski4321
@willanski4321 18 дней назад
@@ODVINE I found another comment on this vid which had a fix. Go back to the mirror modifier and make sure it's just the Y axis that's selected. I had Y and Z selected - just making sure it was Y fixed the issue!
@LONDONBOY10
@LONDONBOY10 3 года назад
nice tutorial, just an alert, you working with meters and not millimeters, everytime you said millimeters you typed M and not MM, so blender created a big ass 9 meters ring out of proportion, but very good tutorial at all.
@GraceNoteForge
@GraceNoteForge 3 года назад
Woops! lol Thanks for the heads up and for watching!
@monolito5153
@monolito5153 Год назад
Hi, thank you very much for the video. I would ask what is the name of the software that show each step you did with the mouse or keyboard.
@kylekoren2631
@kylekoren2631 3 года назад
I must be doing something wrong when I get to the shaping stage and I select the top 3 vertices as you did, but when I got to extrude them the whole ring deforms. Any idea what I did wrong? Love the video tho well done mate.
@kylekoren2631
@kylekoren2631 3 года назад
Nevermind i worked it out i forget to turn off proportional editing.
@GraceNoteForge
@GraceNoteForge 3 года назад
Sorry I didn't get to answer in time. I'm happy you figured it out!
@GForge1967
@GForge1967 2 года назад
Hey mate quick question having a bit of trouble at the 12.44 minute mark my faces turn into lots of small squares when i try to use the insert function instead of all going in together . any thoughts ? when trying to raise the inside of ring
@GraceNoteForge
@GraceNoteForge 2 года назад
In the Inset Faces dropdown menu, make sure "Individual" is unchecked. Otherwise it will inset each face separately.
@elishaevergreen2510
@elishaevergreen2510 Год назад
hitting 3 on the num pad doesn't do anything when in in the blender app, is there another way to get that side view?
@shambhurajpanhalkar3989
@shambhurajpanhalkar3989 2 года назад
very nice ❤❤❤❤❤❤❤
@sarahgriep6213
@sarahgriep6213 2 года назад
does anyone know why when I try to change the shape of the top it moves the entire ring and not just the selected vertex? would love some troubleshooting ideas. Thanks!
@GraceNoteForge
@GraceNoteForge 2 года назад
My best guess is If you're using the preposition editing, sometimes the area of influence is too high and moves everything. Try scrolling your mouse wheel down (if proportion editing is turned on) to only adjust the vertices you want.
@carlosalvarez-vi3os
@carlosalvarez-vi3os 2 месяца назад
hola, estoy comenzando a usar blender, pero no se como hacer aparecer el panel de edit para el looptools en el minuto 7:51, alguien podria ayudarme, tengo la configuración de fabrica del programa, versión 4.2
@aliasmiles6711
@aliasmiles6711 Год назад
When I bump up the thickness of the ring, the measurement goes to -2.2m but when I go the other way (inwards towards the center of the ring ) it goes to the +. Any reason why measurement is going the opposite way? thanks
@heidona2
@heidona2 4 месяца назад
What model of 3D printer do you have?
@GraceNoteForge
@GraceNoteForge 4 месяца назад
I use a Phrozen Sonic mini 8k
@heidona2
@heidona2 4 месяца назад
@@GraceNoteForge thank you so much
@Wlhrnkl
@Wlhrnkl 7 месяцев назад
I’m stuck at 6:30, when I try to hit g and z to make the top of the ring thick the whole ring stretches instead, any suggestions?
@dopesmoky
@dopesmoky Месяц назад
you have to turn off proportional editing, from when he says to set it to sphere at 2:30
@ctgfury8960
@ctgfury8960 2 года назад
hello i cannot see the mesh symmetry option at 5:58 could you help please?
@tysonoak
@tysonoak Год назад
I’m struggling with move at 6.10 minutes, when I select the mesh it moves the hole ring, can someone help me, I’m using version 3.6
@bwaanthony9355
@bwaanthony9355 2 года назад
How can I make a nice little border raised up border of the ring so I can set diamonds???
@beaumcloughlin413
@beaumcloughlin413 Год назад
unfortunately once i got past adding the modify stage no mater what vertices i select, clicking G,Z moved the whole model instead of just what i selected in edit mode and i was unable to continue im using blender 3.3. how do i fix this ?
@beaumcloughlin413
@beaumcloughlin413 Год назад
in an idiot i forgot to minimize the scale on the mouse wheel button XD thats why it was moving everything
@jacquiewiegand6323
@jacquiewiegand6323 3 года назад
i know you got more then one blender jewelry tutorial, can you please make a play list? Too much other stuff mixed, its confusing
@GraceNoteForge
@GraceNoteForge 3 года назад
I don't have many at the moment but I'm working on making more. Ill definitely make a playlist for them. 👍
@northernfrost
@northernfrost 2 года назад
instead of a sub div to 5, couldn't u just subdivision 3 then shade smooth to save memory
@bwaanthony9355
@bwaanthony9355 2 года назад
Hey Guys I also Need Help I just Made A Ring and I’m adding stones using jewel craft but the stones show up behind the ring.SUPER ANNOYING, I can’t do anything to make the diamonds show up on top of the ring. It’s like the diamonds are locked behind the ring layer 😭
@Beeru24K
@Beeru24K 2 года назад
At 08:14, when I dissolve the edges I cannot get rid of the edge in the middle. An edge along the Y-Axis remains and will not dissolve! How to fix this?
@savagestation727
@savagestation727 2 года назад
i have the exact same issue
@bosm3r
@bosm3r Год назад
@@savagestation727 also having the same issue
@memedrawing777
@memedrawing777 8 месяцев назад
min 4:07 Why when I use solidify, the ring gets thicker but like diagonally and not even?
@memedrawing777
@memedrawing777 8 месяцев назад
Ya supe como, es que por error tenia vertices duplicados al extruir 2 veces, y por eso se solidificaba mal, asi que tuve que eliminar los vertices duplicados seleccionando todo con tecla A, F3, escribi merge, y clic en by distance. Y asi se unificaron otra vez mis vertices 😁
@motoronvlogs214
@motoronvlogs214 3 года назад
mines not perfect cirlce. how come there's a line both top and bottom of the ring? -_-
@Streamcatcher
@Streamcatcher 2 года назад
If you have a seam where the two mirrored parts meet and clipping is not enabled in the mirror modifier, you get a sharp upstanding edge. Is that what you mean?
@hanneswelthagen9747
@hanneswelthagen9747 2 года назад
When you added your mirror modifier and you clicked on the Y axis, you did not unclick the X axis. Only the Y axis should be selected. Took me two days and several restarts to realise what was happening.
@DeniedGrace
@DeniedGrace 2 года назад
@@hanneswelthagen9747 Thank you!!!! I was so frustrated and couldn't figure this out. You solved the problem.
@Ben-lp7xo
@Ben-lp7xo Год назад
@@hanneswelthagen9747 that’s fixed it !!! thanks so much
@willanski4321
@willanski4321 19 дней назад
@@hanneswelthagen9747 OMG I love you haha been scratching my head with this for hours haha
@AudiobyDiid
@AudiobyDiid Год назад
can i have the file were u have as a template ??
@ChristianSalidaga-h4e
@ChristianSalidaga-h4e 4 месяца назад
Unhide key is not working :(
@larrymoremckenzie3029
@larrymoremckenzie3029 Год назад
I just seen a recomendation on tic-toc ,if you trying to use blender on a Mac just delete it save yourself some time and trouble!
@gucc739
@gucc739 10 месяцев назад
What about the measurements?
@brobiv2452
@brobiv2452 10 месяцев назад
hey everyone oK BRO
@Dan-t8w2z
@Dan-t8w2z Месяц назад
4:46 when I add the subdivision modifier I get a line through the very top and bottom, how do I fix this, I've followed exactly how you have done it in the video
Далее
Blender 4 1   Ring creation with jewelcraft
25:29
Просмотров 6 тыс.
СОБАКА И ТРИ ТАБАЛАПКИ😱#shorts
00:24
Create A Simple Signet Ring in Blender (3D Printable!)
12:18
I created a Deadpool Anime... in Blender
12:55
Просмотров 343 тыс.
Blender Tutorial: Photorealistic Ring  | EASY Way
23:28