Job in Canada from Overseas - Course or Thesis Based Masters - PG Diploma or Masters - 

Master Razdan makes all these videos wholesome ❤️

Very practical and make sense 👍

Bhai I really appreciate to you for making such informative videos.

Thanks for providing valuable information

Thanks bhaiya.. Most useful video on this topic..

Good content here 🙌🙌 thank you des

Thanks sir you resolve my issue.

5:48 bhai dil jit liya

Hello sir i hope you are doing great over there , im confused which course i have to chose to get into oil and gas company in ms Canada from Alberta University and im in my final year persuing my bachelor's in India

Hi Brother, again have to say, a video which gave a lot of answers to the questions. Well done and thanks as well. Apart from that, I had a question regarding The Certified Technicians and Technologists Association (Various Provinces). Just wanted to know, if someone has a Bachelor's degree, will he be eligible for Certified Technologist? If yes, then the skill type (0,A,B,C,D) will be the same? Thanks in advance.

FALL/SPRING which is best for masters in Chemical Engineering ? I would like to thank you for making such informative vlogs especially for chemical and mechanical students. 🙏🏻

Thanks alottt❤❤❤

last parts were so sweet and thanks for all the information.

Sir, can you please make a video on MBA in Canada particularly for oil and gas industry

Sir waha par mechanical engineering masters karne aaye toh bilkul anjaan jagah, akele, koi ID nahi, mob, ghar medical help ke bare me Canada me land karte hi yeh jankari kaha se milegi? Room partner mechanical engineering ka kaise milega? Koi indian students ka help line number ya group hota hai kya? Aapne course base masters ya thesis base kiya hai?

First of all thanks for making a video on mechanical engineering with deatils. I searched on the internet regarding the jobs as a mechanical engineer, but I didn't find much informations, and the informations which I found usually have negative response as a mechanical engineer in Canada. I have few doubts which I think only u can solve. Currently I am pursuing bachelor's in mechanical engineering in India, and after the completion of this I want to pursue either master or PG Diploma in Canada completly depends on fees and overall expenses. By searching on the internet I came to know that Alberta is the best for mechanical engineer, so I prefer Alberta. However, the weather of Alberta is pretty harsh, and I never saw any student prefer Alberta. My family told me that as weather is cold and less Indians are there in Alberta I should rather select Ontario. So, what the scenario of atmosphere in Alberta especially in Edmonton and Calgary and what about no. of Indians? I am from Gujarat, in our state the least temperature in winter is around 12℃, so can I able to sustain in such weather?? I either want to go in Power engineering or in petroleum sector. As per u which field have better career option? If possible can u plz tell me some of the best colleges and University in Alberta? I am waiting for ur reply😊. I am targeting September 2021 and my IELTS results is in April first week, so after that I am going to file my visa process. Plz, respond before that.

Sir I am Mechanical engineering with two years of work experience in Material Handling Equipment Manufacturing and Design. What are my chances to get into tech companies like Google, amazon, microsoft, apple, Facebook, etc. After completing an MBA in Human Resource Management or Marketing

Excellent Video Sir , Sir , what are review about masters in Electrical and Computer Engineering ?

brother, what is the scope or options? if we have a thesis-based master's and Ph.D. in manufacturing or design from another country rather than Canada.

Sir ek video industrial millwright pg diploma pe bhi kr de alberta mai kn se colleges or uni offer krte hai ye courses or kitni duration or experience or education chaie hoti hai

Lots of love and respect from Pakistan ❤️

In which field design or manufacturing have scope in mechanical engineering in Canada?

HI sir aapka reference muje CANADA TALKS JIGNESH BHAI ki RU-vid Chanel se mila he

Hello Sir, it was nicely explained video related to educational criteria.. But what if we have minimum 10 yrs experience ( India as well as Gulf region ) in Port equipments ( Container Handling equipments ) maintenance with the base of Mech. Diploma, Is there any possibilities to get direct entry with PR? If yes, then which area/provinces we should target? And what will the average income in Canada? Is there any possibilities to relocate along with the family? Please help me out or guide me to set my appropriate target to move to Canada. Thank you 🙂

Sir can you tell what is the procedure about getting admission in post graduate diploma in physiotherapy and cost of fee. I'm graduate (4 1/2 year) degre course.

Sir baking a pastry art management ya hair dresser aur makeup study ke liye 12th ke baad kar sakte hai kya please jankari dijiye

Hello, This is Danish, I am a mechanical engineer plus MBA and having experience of 11 years in steel industry. Now I am opting for immigration to Canada. I wanna know should I straight go for masters in mechanical engineering after getting my PR or look for job???

Agar koi india se fashion management kiya hua h to uske liye kya options h... Me national institute of Fashion and technology se management kiya hua hu.. Or freshers hu to mjhe kch btaye plz.

Hello Sir,I am a fresh mechanical engineer and am confused about which pg course should I go for. Although,I have a plan to for an MBA after getting some work ex or maybe PR in future. What do you suggest!?

Dear Sir, I have 6 years of experience in the Boiler and pressure vessel field, And I completed BE in Mechanical Engineering. I wish to switch to Canada. Can you help me regarding this...please.

Masters in mechanical engineering ke baad Canada me job availability kaisi hai( especially considering covid situation)

Hi Sir, I have completed my bachelors in mechanical eng and planning to pursue my masters in engineering management from Univ of Alberta I have 2 years of work exp . Is it a wise decision?Should I apply for thesis or non-thesis?

Mechanical engineering masters karne ke baad job mili toh minimum salary kitni ho sakti hai, thoda andaza?

Hello sir, Myself Feroz ,mechanical engineer with 7+ years of work experience and out of which 4 + years work experience is in Saudi Arabia ( presently working as Qc mechanical engineer) experience in power and Water desalination plants. I’m planning for masters/ pgd courses in Canada. Can you suggest what type of courses suitable. I had 68% (7.15 CGPA) in my bachelors-2014 passed out. Your reply helps me a lot as now I’m in process of applying.

Hello sir, I'm planning to do a 1 year pg diploma in finance ( from canada ) immediately after my bcom ( from India ). Are there opportunities for me to get a job after this Diploma?

sir what is the procedure to get placed on oil and gas company

Sir mai recently b tech mechanical engineer passput kiya huwa mai Canada as freshser job ka talash hai kaise kiya kare

what's the difference between fees for pg diploma and masters?

Sir ,i have m.tech in applied geophysics . No experience.so it is good to go for masters in Geophysics in Canada again.and it has good scope or not?

I have passed diploma .so I want to go to canada then what will have done please reply me fastly (2021).

Hello sir, what is the scope for masters in Industrial Engineering in Canada

Sir i am a Mechanical engineer..... bachelor's of technology management from nait is good option or not? Please do reply!!

I am a Mechanical Engineer with 11 years of experience in oil and gas industries as a Quality Engineer. I did my MBA in 2020. Now i am willing to study Masters in Engineering in Canada Can i get study visa ?

Hi sir , i am mechanical engineer working in oil and gas in drilling section for 3 years in the middle east. The best province is alberta. I am planning to do my masters in canada 🇨🇦. Should i do a course based M.Eng or a thesis one. And which universities will you recommend in alberta for masters in mechanical engineering. Very grateful for your videos sir.

What about jobs oppurtinities afte doing PG in Health Care Management from canada ? is it in Demand..? Would i be able to get a job just after finishing PG programme?..Waiting for answer 🙇🏻

Aap waha first time gaye, aapka waha koi tha kya?

Sir, i am mechanical engineer and i want to do masters in mechanical, which college i should apply?

What's the scoop of HVAC DESIGN in Canada

Sir what about HVAC and MEP course?

Job ke liye degree kon sa chayihe??

Hi Sir! I have a doubt regardig post grad work permit... I want to take a M.Eng which I think 1 year full-time course. If I do it 1 and half year with internship.. would my PGWP be 1 and half years or just a year?? Pls pass me the info,....Thank u for all ur videos.

course base master me konse subject choose kare

Hi i am B E Mechanical Engineer I have 10 years of gulf experience in oil and gas any requirement plz updated

Part time job is available for mechanical engineering?

Hi, I already have masters in India.. I want come and work in Canada.. Should I go for second masters or pg diploma?

Sir Mater k liye University batao sir Mechanical Design Engineering

Plz make a dedicated video in Peng certification Like if someone complted his master from Canada 🇨🇦 then he has to give test of Peng. Or just get that certificate to show his master degree???? Plzz reply

Hello sir what is the average tution fees for Meng mechanical engineering in Canadian Universities .

I have just became CA in India have done 3 yrs of internship with EY, I can become CPA by giving 4 papers, so original plan is to do CPA Canada, but to come there I don't wanna depend on express entry. So shall I take two yrs masters or 1 yr diploma? You suggestion. Only purpose of Masters or diploma is to get in Canada

1. Sir now I am working as a site engineer in HVAC in DUBAI. So can I switch to Canada in same field.. 2. Piping design and drafting course in india can help in Canada or which subfield of piping is good. 3. Having HVAC experience with piping design can give growth

Pgdm data science program at exact Toronto vs master at Windsor???????

Hello sir, your videos are pretty knowledgeable. I want to do MASTERS in MECHANICAL ENGINEERING. I was an average student during BACHELOR'S. How difficult is the MASTER'S especially Mathematics?? Thank you..

Mr razdan can you please tell me the scope of HVAC in canada

Sir can u suggest which courses to select so that I can enter oil and gas industry. I am a mechanical engineering student with 76.80% I am confused in selection of masters of mechanical engineering, masters of mechanical engineering and industrial engineering, manufacturing engineering, engineering management. And is thesis based program or course based program easy to finish.

Hello sir how are you I hope are you good I am Muhammad zeeshan I from Pakistan I am civil Assiste Engineer I have building construction experience and road's over all experience in construction field now I . currently working in UAE sir please tell me Which programs should I apply to and in which city should I apply to Canada? pR or express entry please sir must answer

After diploma can i chose bechlor or PG diploma

Which course demand in master degree after mechanical engineer

Sir can you tell scope for marine engineer in Canada?

I have completed my M. Tech. in Manufacturing engineering and have teaching experience of 4 years. What are the options I have to come to Canada? One option I found is doing masters again.

hi sir i am mechanical QA/QC Engineer with around 10 years of experience in core field i am 2012 passout from banglore i am planning to move canada on PNP base so is it possible to get job there? or should i get job if i will get PR kindly advice i am in phase of applying

Sir ,I have a CGPA of 7.43 and a 2.5 year experience as a chemical Engineer in a reknowned private firm ,would I stand a chance to grab a masters seat or should I apply for a Pg diploma course(related to chem.engg) Thankyou:)

I am big fan of you

you have search to video editer plz let me know

Sir , I have 2 years of experience in steel fabrication industry in middle East in QC department , I have experience in structural steel as well as pressure vessels . Should I wait for pr or come and do masters there .

But if I do course based also is that good because thesis can take mode than 2 years u r doing research n all and publish a research so if I do course based masters is that also good ?

Kian 😘😘

How to get job in oil and gas industry in Canada?

Very informative video. Sir, I am a Mechanical Engineer from Pakistan having about 4 years experience in R&D department in Home appliances industry. Now, I want to pursue my Masters (Course based) in Canada. Can you please suggest some good universities according to my experience. Waiting for your kind guidance.

Hello, i hope you are doing well, i am from pakistan and i have a bachelor in sciences degree in geology, i will be applying for master in sciences in mining engineering soon in canada I had a question that after completing my masters will i be eligble for a EIT or p.eng license?

Hello sir , which field is best to start career in HVAC or QA QC inspector after Bachelors degree and intend to pursue Masters after gaining some experience in relevant field

Hii sir Canada in m.s in IT after mechanical engineer

can you suggest a good course involving artificial intelligence and mechanical. i hate designing

Diploma or PG diploma. are same or not ?

Love you sir... 😶

Hi I was thinking of pursuing masters in aerospace engineering in Canada. Is it worth? And how are the job opportunities?

Sir I m a mechanical engineering student. My interests is in master's in design engineering . So which place and which University would you suggest to such opting students ?

Sir mera BE Mechanical Engineering and 2.5 year ka work experience as a service/ maintenance Engineer, working on diesel engine and hydraulic system . sir please btaye meko kya krna chahiye canada me job ke liye? due to covid-19 I'm jobless right now mai linkedin se bhi try kiya but kuchh nhi ho pa rha😓

Sir paper and pulp industries mae thermal power plant hai or paper and pulp industries mae mechanical engineering ka maintenance ka kaam hi hai naa sir...... Please reply

Wonderful

Sir please share your thoughts about systematic racism in Canada. After completion of masters will it be possible to get a job ?

It is true that a form worker job can be found in Canada.

Sir Mai b tech (ME) 2020 paasout (fresher) Hun . Koi link ho to India🇮🇳 men lgwa do Berojgar Hun 15000 tk Ki bhi Naukri bhi chalegi

I am Diploma engineer

I persuated my bachelor's degree in Mechanical engineering..I want to continue with masters in industrial engineering..But not able to choose a particular course ...with the experience u have can u please help me in which feild should I Persue my master's ..according to most jobs available. Your reply helps me a lot🙏

Namaskar mahra..gave my ielts gt ...but I got 7.5 in list and 6.5 in reading and for writing n speaking I got 7...

hello sir, I am a mechanical engineering student with 1year of job experience in IT sector (Infosys), if I apply for Meng in mechanical engineering will my 1year of IT experience be considered or not.

I am looking to apply for Bachelors in Computer Science/Software engineering from one of the top 20-25 universities. What do you think about future job prospects!! Thank you!!❤️

Hello Sir ..my doubt is which one should i choose thesis or course based master...which one you choose when u were at uinversity of alberta ..will i get job in industry doing thesis based master...please answer it sir its very important for me...

Pg diploma krne ka fayada hai?

Then what about the rookie students with no exp How can they apply for job?