I just bought a used Joe Collins winder on Ebay. The seller told me it was one that Joe had made years ago and sold to him new. At any rate, the winder is wonderful and works perfectly. This video helped me use to it without breaking the winder, spring, or hurting myself. Thanks for posting the video. And hat's off to Joe!!
This is just so good. I am part way through making one and am so pleased with the simplicity and effectiveness of the plan.I used small galvanized iron gas pipe to make the handle and hold the tap chuck (saves any machining and it just screws together).
Of all the clock work I've done, I've always avoided this part of it. I've got to find myself a winder and this video I'm going to bookmark because you've done a great job showing the process.
This type of design is the safest way to deal with very heavy fusee springs. It also makes the job of making up a new spring from stock strip that doesn't have any 'set' until wound much easier. I have several of the traditional designs of winder, but had to make myself a crude edition out of scraps so that I could deal with a particularly vicious spring.
Looking at building one just like this will use a 3/8 auto ratchet for the winder connected to an extension and arbor from my lathe. Great work Joe. Thanks.
I would be willing to build these for the clock repair community but I need to know if Joe is still making them for sale. If so, I won't do it. Please let me know if Joe is still making these. I can't find them for sale anywhere, and even those requesting to buy the plans don't get responses.
Re the barrel clamp sliding mechanism: Very good idea by the way. If you made it symmetrical i.e. make the channel it slides in the full width of the holder, you would be able to flip it without removing the barrel each time. HTH
Thank you for sharing your wonderful inventory ideas 💡 😊 I have one question how ❓ do you remove a spring that has been over wound causing it to snap! I would be grateful if you could please explain the process in full. Have a great day take care 🕊
Hi Joe; Your video was a Godsend. I had been winding mine by hand on a my lathe then slipping them back in the barrel by hand-not a comfortable solution. I made a very similar winder to yours and it works quite well. I kick myself for not coming up with this idea a couple of years ago. Thanks again Jim
Very Un-impressive design. Gadget is not user friendly, only the "inventor" can use it with less difficulty (others with more difficulty). Making of this gadget itself is a hassle, inviting more aggravation than using the finished product.