John Deere 220 Greens Mower Backlapping - Basic Instructions.

Подписаться 805

Просмотров 18 тыс.

50% 1

Im reconditioning this JD 220B mower for a friend to start using in his lawn. I made this backlapping video for anyone that may need help. This doesn't go into as much detail as my other backlapping videos. Please join thelawnforum.com with any detailed questions you have about the JD 220 Greens mower.
Home Owner Reel Sharpening Kit: amzn.to/2sVX5Nm
PinHigh 120 Grit: amzn.to/2JMy69M
PinHigh 80 Grit: amzn.to/2JJs0a5

Хобби

Опубликовано:

31 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 18

@v8soarer1991 6 лет назад

Poppi3579, Valve Grinding Compound will do the same.

@apbarry 6 лет назад

v8soarer1991 Valve lapping compound is typically a much finer grit like 400-1200 grit, and 3-4 times the price per oz. of product. It’s also much more difficult to remove from your reel and can harm/kill your grass if you don’t remove all the valve compound. It’s best to save yourself the time and money to buy the correct product for the job.

@aarce8819 Год назад

I have a John Deere 260SL. Do you know how to remove the transport wheel axle?

@apbarry Год назад

No, I cut them off mine. If you cut yours, be sure to leave .5 inch of the axel in the event you need to disassemble the drum assembly

@zachr1538 5 лет назад

3/8" course thread or fine thread?

@apbarry 5 лет назад

Zach Riggins course

@Poppi3579 6 лет назад

Where can I get some lapping compound in the smaller sizes?

@apbarry 6 лет назад

Poppi3579 call PinHigh at 1-800-422-4748 or search them on Amazon

@GrassDaddy 6 лет назад

I wanted to backlap the Swardman but apparently you can't.

@apbarry 6 лет назад

The unit I tested at Ware’s House could be backlapped. I don’t think they want you too, but it can be done!

@johnmainhard8901 3 года назад

of course you can! German @Rasenfreak did it. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Q5GALITpZ5o.html

@bmacski 3 года назад

I’m needing some help with my 220A and I’m outside of okc. Could i ask you a few questions?

@apbarry 3 года назад

Yes, but you will likely get better answers on www.thelawnforum.com

@bokroener2319 3 года назад

I Am in okc message me if you need to

@felipelabomba848 2 года назад

I've always read and heard that there should be no steel to steel contact between the bed knife and the reel blades, when adjust properly for grass cutting. Seems like your reel, in this video was still making steel to steel contact after you back-lapped. A one thousandth feeler gauge should slide between the reel blade and the bed knife. Do you have an opinion?

@apbarry 2 года назад

It’s preferred by the manufacturer to have no contact. however, most of the greens mowers available on the used market are 10+ years old and it is hard to get them adjusted perfectly like a new unit. I run with a lite amount of contact between the reel and BK. I find it to work best for me,