Тёмный

John Deere 440 Crawler-REASSEMBLY-Popple People-Episode 30 

The Popple People
Подписаться 1,2 тыс.
Просмотров 4,3 тыс.
50% 1

Опубликовано:

 

25 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 25   
@yachtsteve
@yachtsteve 2 месяца назад
This is one of the better videos I've seen, I need to adjust my steering brake and clutch but most of the information I've seen thus far has just pictures through the hole, this one helps you see exactly what's going on to make more sense of doing the adjustment
@PopplePeople
@PopplePeople 2 месяца назад
Thanks!
@johnraynor5095
@johnraynor5095 Год назад
79yr old countyboy from Idaho. Enjoyed your tutorial. I'm currently working om restoration of a johndeere MC.
@PopplePeople
@PopplePeople Год назад
Thanks! Good luck!
@r1ot1ng247
@r1ot1ng247 5 месяцев назад
your videography skills are great,
@PopplePeople
@PopplePeople 5 месяцев назад
Tks! We appreciate that!
@timthomas8387
@timthomas8387 Год назад
Nice job!
@PopplePeople
@PopplePeople Год назад
Thanks!
@rustymullins6623
@rustymullins6623 Год назад
Very informative…I have a terrible time keeping final drive bearings to last…
@PopplePeople
@PopplePeople Год назад
Good to know…thanks for the heads up on that!
@C1Ksdafafdsa980ufsd
@C1Ksdafafdsa980ufsd Год назад
Great set of videos. I just bought an old JD 440ic, and it only steers to the right. A bit annoying to back up to turn one way, and going forward to turn the other way. I'm hoping it will just be an adjustment. What did you think of the condition of all the parts you replaced? Would the clutch have been OK for a few more years? Of course, one always hates to do that much work then have it go bad because of a $10 bearing.
@PopplePeople
@PopplePeople Год назад
Hi Clifford! Thanks for watching! We appreciate it! The parts we took out (clutch fibers & steels) probably could have been reused…but when you go that deep, just replace it all, including the brake band! It’s important to replace the brake band because that’s part of stopping the track when you’re trying to turn. Just repairing the steering clutch & not replacing the brake band will cause it not to steer properly. There are a lot of critical adjustments you need to make when you’re doing this. Be careful about buying after-market parts for the clutch plates because there can be clearance issues-specifications are in the repair manual for clutch disc clearance (this is critical to be within specification). This sounds like the same problem we had with steering….we pushed ours about as far as we could…it was time to replace!
@PopplePeople
@PopplePeople Год назад
We went with keepemcrawling.com & had good luck with them (Michael was very helpful-we called him several times to ask questions!)
@leonardobauchiero1347
@leonardobauchiero1347 Год назад
did you have to put jack stands under the machine?
@PopplePeople
@PopplePeople Год назад
Great question! No, we didn’t because we only did 1 track..if we had done both tracks simultaneously we would have needed to use jack stands to support the machine. Thanks, Leonardo, & good luck!
@leonardobauchiero1347
@leonardobauchiero1347 Год назад
​@@PopplePeople Hi one more question were did you order your parts from? I just so hapen to have to do the same job on my machine in a few weeks thanks.
@PopplePeople
@PopplePeople Год назад
We ordered our parts from Michael at keepemcrawling.com (phone: 402-670-3573). He was very knowledgeable & helpful & had all the parts we needed. Good luck! Feel free to email us if you have any questions that come up!
@johnfloyd6000
@johnfloyd6000 8 месяцев назад
How did you get the two lower bolts on the inside (the funny shaped ones)
@PopplePeople
@PopplePeople 8 месяцев назад
Do you mean those bolts with the weird bulge in the middle?
@johnfloyd6000
@johnfloyd6000 8 месяцев назад
@@PopplePeople yes
@PopplePeople
@PopplePeople 8 месяцев назад
We had to take out the foot plate on that side to gain access to those bolts.
@yachtsteve
@yachtsteve 2 месяца назад
By the way my JD 440 is a 1959 as well. And I am a 1959😂
@PopplePeople
@PopplePeople 2 месяца назад
🎉👍
@johnfloyd6000
@johnfloyd6000 7 месяцев назад
Don't use keepem crawling for parts ,i called and waited 3 weeks for a call and still have never heard from them yet ,i wanted a price on 2 steering clutch kits
@PopplePeople
@PopplePeople 7 месяцев назад
Oh rats! Sorry you had that experience…we got lucky & had good luck using them.
Далее
Bulldozing With A 1957 John Deere 420c Crawler
30:42
Просмотров 30 тыс.
Tips for purchasing John Deere Crawlers
10:19
Просмотров 20 тыс.
Fixing Up a John Deere 1010 Bulldozer
40:21
Просмотров 49 тыс.
John Deere 420 Crawler/ Why won't it START??!
14:03
Просмотров 8 тыс.