John Deere OEM Third Function - Adding a Continuous Run Button

Подписаться 4,4 тыс.

Просмотров 6 тыс.

50% 1

With upcoming continuous run implements, we now have a need to add the ability to toggle on the third function so that you don't have to keep holding down the button. This new product will give you that functionality in a clean setup, so long as you're running the JD OEM third function. Shown here on the 1 series, but this will work for 2 and 3 series tractors as well.

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@doughansens5599 Год назад

I caught a glimpse of a little different exhaust exit. 😁

@willie0001 Год назад

Come in handy for my Trimmer, looking forward to the adjustable JD 3rd function flow.

@minutemanmac Год назад

Ok I found the part numbers for the joystick handle and ordered them. They do not include the gray membrane or white spacer, as that is part of the switch wiring and does not appear to be available separately from the entire 3rd function handle kit ($360). Maybe add your own membrane and spacer to your switch Kevin?

@projectswithjw Год назад

I'm ready for the triple turbos! 😁

@oimate4201 10 месяцев назад

I really appreciate your innovation. I agree with some of the other comments that there are a lot of ways to do things. If there’s enough space for the logic portion, perhaps a three-way on-off-on switch would be good: momentary-off-latching. One of these days I’ll have some $$$ set aside, LORD willing!

@minutemanmac Год назад

Just pre ordered this, and am looking forward to it. Looking to test it with my Summit 3rd function until you release the Hydros 3rd

@TallTexasGMan Год назад

Another option to consider is a simple circuit at the end of the existing wiring. Use of a set of latching circuits, you could have that button be a latch that then looks for another input. Such as the directional button. With proper wiring you could still support reversing of the valve and auto resume of the other direction. Pressing the button again will cancel all flow. This could also be wired so that in even of ignition off (or other emergency shutdowns) it goes to a neutral state.

@HydrosPlus Год назад

Agree and I have a schematic built using latching relays, but it's obviously more complex than this approach...but it has its advantages. That said, I hadn't thought about using the 3rd button to "activate" the latch and then wait for another directional input. I definitely like that idea, but sounds like it might need a micro controller, which isn't an issue necessarily, but will require more space than what is afforded in the current handle. As mentioned in the video, for the HydrosPlus 3rd function, there will be more buttons and I'm still deciding the best location for those. It will likely have the latching relay approach because I will already need a housing for the potentiometer. Thanks for the comment! Very helpful!

@MJF40 Год назад

Have that handle 🤓. Looking forward to this

@kdeckster Год назад

Very cool Kevin!

@minutemanmac Год назад

Very much looking forward to this. What's the part number for the handle so I can get that started?

@williamcoffman7149 Год назад

ive got a 2020 1025r, and also have the john deere 3rd function setup like your showing minus the continous button i wouldnt mind getting once you get a hole for them in the center....what ive been wanting is your hydro setup the hooks to your top link on your rear....ive got the power beyond, but have been wanting the lines that go from your front 3rd function that goes to the back hydro connectors and the bracket to hold them on the rear like you have.....

@projectswithjw Год назад

They are on the website. Its the third function plus kit.

@HydrosPlus Год назад

Yep - the 3rd function+ is available on the website and in stock. Give me a ring if you have questions.

@user-bd8jc5zw3r 6 месяцев назад

What is the part number for the switch you installed on the joystick?

@MrRoadtrek Год назад

👍

@matthewthompson6266 6 месяцев назад

Would that be possible to be used to actually turn on or off the third function valve? So that way you could turn it off in case you accidentally hit a button while driving with load or while off the tractor and don’t want other people messing with it? Not sure if my question makes sense.

@HydrosPlus 6 месяцев назад

Your question makes sense. I didn't want to add that complexity because if you add it, then you have to deal with the inverse, which is trying to turn on continuous run and it doesn't work because the safety is "on". If it was very easy to accidentally hit and there was some dangerous effect if you did hit it, then it would make more sense, but in the case of the 3rd function, your tractor will just act funny until you realize what happened. Similar to not plugging in the power beyond completely or a loader connection. If that happens, it's puzzling for a minute, but then you rectify it and continue.

@BC_I_LETU Год назад

lva13698 is a much better handle. Same control but feels better in the hand I think.

@adamd4218 3 месяца назад

I don't mean to be ignorant, but I'm having a hard time seeing the useful function of this. Are there certain functions you want to continue holding it?

@HydrosPlus 3 месяца назад

This is for continuous run hydraulic implements like the HydrosPlus Auger+, or a broom, power rake, etc.

@adamd4218 3 месяца назад

@@HydrosPlus See, ignorance.. :D Thanks. I knew there was a reason.