Jon Boat Float Pods / Welded On  

10 psi argon mix, 4/70 on my miller. .030 wire

4043 , 030 diameter

No loss of speed! The boat runs more free in the water as it is no longer dragging it's ass from the weight of the motor. All Positive !

@@dondoesitokay great ! You think it’s okay won’t affect plane ride speed not to mount them flush to bottom or side ? Inch up or so to and inch in on both side to side avoid drain plugs ?

@@coltensawyer6761 Flush to the bottom, No more than 1/2'' Rise is how the instructions read. I made mine perfectly flush to the bottom with no rise. and yes; all the way out .

@@dondoesit ​​⁠will do! Thanks for help. I’ll just have to work around my drain plug some how. I’m gonna bolt on I have access to a Lincoln mig 220 that does alum or steel. I can do steel but alum I’m to nervous to burn through

@@coltensawyer6761 Just take your time. The make a jon boat drain plug kit so you could move it to a more favorable place.

1448 Grizzly Tracker

My bottom is 48'' so I went with the Medium. Worked out perfect. On the Beavertail site they have a chart to tell you what size you need by the bottom width of your boat.

Thanks