Jonsbo D31 Mesh mATX PC Build | 13600K | Z690M | NF-A12x25 | TL-B12

Подписаться 4,3 тыс.

Просмотров 83 тыс.

50% 1

Jonsbo D31 Mesh mATX PC Build!
Small but Powerful :)
Parts List
- Jonsbo D31 Mesh (Black)
- Intel Core i5-13600KF
- Thermalright LGA1700-BCF Contact Frame
- Gigabyte Z690M Aorus Elite AX D4
- Corsair Vengeance LPX 32GB 3600 C16
- ASUS ROG STRIX Radeon RX 6700 XT O12G
- ASUS ROG RYUJIN II 240 AIO Liquid Cooler
- Noctua NF-A12x25 PWM chromax.black.swap x3
- Thermalright TL-B12 x2
- Maxwell Count 750W 80PLUS GOLD PSU
Chapters
00:00 - Motherboard Assembly
01:13 - Jonsbo D31 Mesh Assembly
05:02 - Cinematic Mode
06:11 - Thermals*
* Thermals
- CPU Voltage Mode (Auto)
- PL1 and PL2 Power Limit (4095W)
- Cinebench R23 (Mulit Core 24157 pts)
- AIDA64 FPU (15 Mins)
- Realbench 2.56 (15 Mins)
- Ingame (Destiny 2, Cyberpunk 2077 and Forza Horizon 5)
- 4K Rendering by DaVinci Resolve
Please like and subscribe for more!
#Jonsbo #13600k #6700xt #matx #noctua #thermalright #norgb

Наука

Опубликовано:

1 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 106

@jonathantran5821 2 месяца назад

Only build in the D31 I've seen that maximized the fan placements. Good job.

@SNAPSHOTREVIEW 2 месяца назад

Oh, thank you very much! I'm planning to do various PC builds in the future. Please look forward to them!

@user93683 Месяц назад

No way, he used that front fan mount. I don't understand why almost no one uses it. Like every build video I watch there was about 2-3 guys who used it

@SNAPSHOTREVIEW Месяц назад

Oh, thank you so much for watching the video! Looks like you're a fan of the Jonsbo D31!

@user93683 Месяц назад

@SNAPSHOTREVIEW , yes, maybe, kinda) When I first saw this case, it seemed good for me, but after a bit of digging, I discovered some flaws in its design. It's still a really decent case, especially for its price, so there are no reasons to not use it)))

@blkfacejr.9097 22 дня назад

@@user93683what were some of the flaws for you

@chalatan5347 Год назад

Man, I've been waiting for your video. Totally awesome and clean! Nice weekend bro👍👍

@SNAPSHOTREVIEW Год назад

Oh, my man! Thanks a lot! I'm glad you like it, nice weekend too bro 💜🖤

@user-io3tl2lv7z Год назад

언제나 좋은 영상 감사합니다. 매일 새로운 영상이 올라오길 기대하고 있습니다. Peace!!🎉

@SNAPSHOTREVIEW Год назад

네넵~! 좋은 말씀 정말 감사합니다. 아마 다음 영상도 Blackout 빌드로 하지 싶네요 ㅎㅎ Cheers!

@2ndgamingdk Год назад

Always ready to give a big like on your videos! Good job

@SNAPSHOTREVIEW Год назад

Thank you so much 💜🖤 I also look forward to your videos 👍👍

@hyungmincho1402 Год назад

이번 영상도 엄청 깔끔하고 멋집니다. 잘보고가요

@SNAPSHOTREVIEW Год назад

네! 감사합니다.

@Valkirth Год назад

such a clean and stunning build!, really impressed the 13600k temps are so low in gaming.

@SNAPSHOTREVIEW Год назад

Oh, thank you so much! I'm glad you liked it 💜🖤 Please, keep watching upcoming videos! Cheers 👍👍

@TheBaldygb 6 месяцев назад

Jonsbo D30 is an excellent product

@SungchulAn Год назад

Great! 역시 이번 영상도 고퀄이네요 ㅎ 자주 올려주세요. please upload often!

@SNAPSHOTREVIEW Год назад

감사합니다. 자주 업로드를 계획하나 쉽지 않네요. Thank you so much 💜🖤

@peerakanmakma6248 Год назад

thanks for the video, i appreciated it brother.

@SNAPSHOTREVIEW Год назад

Oh, thank you so much! I am glad you liked it :)

@MoistSocks Год назад

Clean build!

@SNAPSHOTREVIEW Год назад

Thank you so much!!!

@khyryII 2 месяца назад

Very noice! I'm in the process of planning for an upcoming build. I'm curious to inquire whether you're utilizing the top radiator as an intake or exhaust in your setup?

@SNAPSHOTREVIEW 2 месяца назад

Oh!! Thank you so much👍👍 The top radiator is set up for exhaust, which is the most common configuration.

@kpw-kenchan 10 месяцев назад

What a build bro, And cinematography is top level. The music you chose is so amazing. Which tracks are you using?

@SNAPSHOTREVIEW 10 месяцев назад

Hi! I'm glad you liked it 💜🤎 The tracks I used were from a paid subscription service, and unfortunately... difficult to remember them. Sorry for that bro👍

@kpw-kenchan 10 месяцев назад

@@SNAPSHOTREVIEW it's not a problem. All you can do is point me to that service and I will find it lol

@kittikoonduangkaewkad9310 5 месяцев назад

Downtown Binary - Lost

@kpw-kenchan 5 месяцев назад

@@kittikoonduangkaewkad9310 thank you so much!!!!!!

@user-yk3op3bf6f Год назад

중간 중간 전문업체 영상인지 알았습니다. BGM퀄리티도 퀄리티인데 중독성 있어서 리듬 탈 뻔 했네요.

@SNAPSHOTREVIEW Год назад

ㅎㅎ 감사합니다. 영상 전문 회사는 아니지만 영상 편집 즐겁게 배우면서 하고 있어요! 자주 방문해 주시고 좋은 댓글 달아주셔서 정말 감사합니다.

@chaics85 4 месяца назад

Nice built. May i know is the clip used on the front and side panels are the same like the lian li's? cos they're prone to brittle after few years of opening and closing it.

@SNAPSHOTREVIEW 4 месяца назад

It's quite different from Lian Li designs. The front panels use plus-shaped pins on them and the side panel uses push pins on the chassis. In my opinion, they seem sturdy so it's not a big deal. 👍

@chaics85 4 месяца назад

@@SNAPSHOTREVIEW thanks for the reply. Will highly consider this case for my next build. 👍🏻

@purfecto 2 месяца назад

nice build my man! got the same case with 14600kf 4070tisuper, went with fuma 3 tower but considering to change to AIO cause in the air cool setup bellow fans are not enough and you have to use at least one more as intake, that introduces a bit more dust because the case lacks top /back filters, although you can clean it more regularly i am also interested in the "Cleaner" looks of aio and might try it, in general i think the case is a optimized WC one, what are your thoughts on Lian Li Galahad II? did you choose 240 instead of 360 aio for some reason? the top has the clearance for a 360 but i guess ull have to run the tubes from the back side if you dont weird bending of the tubes over the psu/front. also in the case of a 360 u would prolly not need a back exhaust and go with a chimney setup?

@SNAPSHOTREVIEW 2 месяца назад

Thank you so much!! I used 240mm in the video and sufficient cooling for the 13600K. The D31 case uses bottom fans mainly, more suitable for liquid cooling than air cooling. The Galahad II Trinity 240 is good enough for the 14600KF, and its pump speed isn't too high, noise is reasonable. Plus, it looks great! I'd recommend it. The LCD version is the Asatek 8th generation, but the cooling performance is significantly better, but the noise level is quite high. Hope this helps💜🖤

@purfecto 2 месяца назад

i have the screen version of the case so one more screen in the block is redundant for me ^_^, tbh i just noticed the arctic LF 3 is out and on sale all reviews seem to be amazing, i am just between the 280 or the 360 now of that cooler, i think the 280 will "land" better in the case and the performance difference should be negligible? not sure... i just hope i dont get pissed by pump noise at idle which is the one thing i love about tower air coolers... oh well@@SNAPSHOTREVIEW

@Ivan-xg1hx 10 месяцев назад

I’ve heard many user complained about high temperature in this case, especially the toasty gpu and restrictive top panel, are your temps still good after a couple months?

@SNAPSHOTREVIEW 10 месяцев назад

Sorry bro! I don't use this chassis anymore but I didn't see any issues with this build setup during the past 3 to 4 wks. Anyway, this case requires the use of a liquid cooling solution to ensure effective cooling because of the three bottom intake fans. Adding one more front intake fan shouldn't cause any cooling issues. However, if an air cooling stuff is used, it may potentially impact GPU temps, also leading to higher temps during hotter weather conditions.

@mickaelsflow6774 10 месяцев назад

@@SNAPSHOTREVIEW what's wrong with the three bottom intake fans? :(

@Nathan-ry3yu 3 дня назад

The only thing that seems a bit shabby to me is that the case can only offer 1 bottom intake fan at the front and 3 others down the bottom of the case when using liquid cooling. Im curious: Does it get more dust accumulation with having intake from the bottom of the case in comparison to if it was say at the front of the case? And is the GPU in the way of the Motherboard from getting enough air intake? Do you think it could have been better designed with the power supply with an option to be mounted elsewhere, leaving options to be able to use two intake fans at the front of the case? Or have you found it didn't matter either way?

@SNAPSHOTREVIEW 3 дня назад

Because it's a chimney-style case, we couldn't have high have high expectations for cooling performance. The PSU's position seems appropriate, accommodating an ATX as a standard. The case size is minimal, but as I remember, the actual cooling performance was not that bad at all.

@hayongsong7793 Год назад

NICE!

@SNAPSHOTREVIEW Год назад

Thank you so much 💜🖤

@Null_pointer_ Год назад

전 후면은 a12x25가 아니라 구매자의 요청으로 tl-b12로 하신건가요? 보통 깔맞춤하는편인데 의외네요? ㅋㅋ

@SNAPSHOTREVIEW Год назад

안녕하세욤~ 아하~ PC 조립을 직업으로 하는게 아니라서 그냥 최근에 구매한 팬이라 테스트 목적으로 넣어봤어요. a12x25가 커넥터 타입이라 가끔씩 빠지는 경우가 종종있어서 뒷쪽 선정리 타이트하게 하면서 하다보니 터프팬하고 고민하다가 tl-b12로 넣었습니다. 감사합니다!

@zekhor1140 11 месяцев назад

Hello! Can i know that what's your airflow direction u set for each side fans? I'm interested in building the same case! I do have NZXT Kraken z53 AIO + R5 3600 + Asus Strix 3080 Also one more question, what's the thing to hold the GPU to prevent GPU saging? Thank you!

@SNAPSHOTREVIEW 11 месяцев назад

It has a total of 4 intake fans with one in the front, and three at the bottom. For exhaust, two radiator fans and one at the rear. This setup seems to provide excellent overall cooling, and the noise performance was also good with using Noctua fans. You have sufficient cooling for your CPU with the Kranken, and it seems like a well-balanced configuration. Finally, to prevent GPU sagging, I used a 180-degree adapter for the graphics card cable. I hope this helps 💜🖤

@zekhor1140 11 месяцев назад

@@SNAPSHOTREVIEW Thank you so much your info!

@kaaiuta Год назад

I'm thinking about getting this case but I'm afraid my PSU power connectors might not reach because of how the cables will be oriented... Your PSU in this build has 600mm and 2 700mm mobo and CPU connectors respectively, was that plenty of length or barely enough? My current PSU has 450mm ATX and 500mm EPS

@SNAPSHOTREVIEW Год назад

+24V and PCI power shoud be fine with your stuff, CPU power is a bit curious... It depends on how you manage cables though.If the cable length is not enough, how about using an extension cable partly? Cheers!

@kaaiuta Год назад

@@SNAPSHOTREVIEW Thank you for the advice! Yeah I was thinking about extensions as a last resort.

@kittikoonduangkaewkad9310 10 месяцев назад

I'm subscribe for this Amazing music.

@SNAPSHOTREVIEW 10 месяцев назад

Oh!!! thank you so much, my friend 💜🖤

@roxycrystals1356 8 месяцев назад

Hi I have a question, You are using mainboard mATX Z690M AORUS ELITE AX DDR4 right? This mainboard have: 1 x water cooling CPU fan header ( it is for upper water cooler and 2 fans on it you use ) 3 x system fan headers ( it is for 3 fans on the buttom) 1 x system fan/water cooling pump header (it is for pump) 1 x CPU fan header ( it is for 1 fan on back) You install 3 fans buttom 1 front and 1 back, it look like there is not enough pin on this board (1 short). Or i do not anderstand somthing. Can You clear on this? Thank You whit regards. PS It is important to me I am building AIO based cooling and maybe you use some trick or realy I dont understand something. PS2 Wideo is ultra cool I was watching this set like 10 times and showing to my friends.

@SNAPSHOTREVIEW 8 месяцев назад

It seems like the Z690M AE motherboard has a total of 6 PWM ports, and although I don't remember exactly, I believe I worked on it as follows. SYS FAN 1 - A front intake fan SYS FAN 2 - A rear exhaust fan SYS FAN 3 - Three bottom intake fans SYS FAN 4 - AIO pump (this port is compatible with it) I used a 3-to-1 PWM fan splitter for the three-bottom intake fans. Please refer to the following link for more details. a.co/d/dWf3aGt The 3-to-1 PWM fan splitter is quite useful, so ordering several of them would be a good idea! Hope this helps! Good luck, my friend👍👍

@roxycrystals1356 8 месяцев назад

yes TY very much this is the answer I was looking for TY once again this splitter that👍👍 is it @@SNAPSHOTREVIEW

@TheRelisted Год назад

what connectors are those for the gpu connection?? 90 degree? sick!

@SNAPSHOTREVIEW Год назад

Hi~! Please check this link! url.kr/adx54e You can find things you want :) Cheers

@abigailhazend8550 Год назад

May I know is that an accessories for connecting gpu power pin? What is that exactly? Please share thanks

@SNAPSHOTREVIEW Год назад

Yo, my friend! Please check! url.kr/jv8oxw Hope you buy good stuff then 👍👍

@foreskrin Год назад

Where did you get the mesh panel for the front instead of the screen?

@SNAPSHOTREVIEW Год назад

Hi! The mesh panel you spoke is included as standard. Or you can buy the D31 mesh version as well. Cheers!

@man3254 Год назад

그래픽카드 전원케이블 연결할때 각진 연장 단자? 쨋든 각지게 생긴건 뭔가요? 케이블 연결할때 좋을것같네요

@SNAPSHOTREVIEW Год назад

오호 안녕하세요~ 밑에 링크 참조하세요! url.kr/adx54e 감사합니다.

@man3254 Год назад

@@SNAPSHOTREVIEW 와... 정말 감사드려요..

@mrbuckums8565 4 месяца назад

have the same case, had trouble cable management and can't get the back on, any tips? and what was the support for the gpu

@SNAPSHOTREVIEW 4 месяца назад

I'm sorry to hear that. There isn't much space for cable management, so try to use the available space on the front and bottom of the case. it would make things easier for you. For the GPU adapter, please check bit.ly/46rLRBN

@mrbuckums8565 4 месяца назад

@SNAPSHOTREVIEW Thank you and was able to get the back panel close. What I was asking is the thing you put under the graphics card to prevent it from sagging

@jacobsmith2466 Год назад

Clean! the 4070ti okay with this case?

@SNAPSHOTREVIEW Год назад

Hi! I think that RTX 4070 Ti should be okay with Jonsbo D31. Ah!! It's definitely better if you use the MOBO starting with the 1st slot for GPU and bottom fans clearance. Cheers 👍👍

@BioSSlon 10 месяцев назад

As an engineer, I have a complete misunderstanding of the presence of a fan on the pump of the LSS. What is this nonsense? O_o

@SNAPSHOTREVIEW 10 месяцев назад

That's right! I agree too 👍 I remember setting the onboard fan load to 0% when using this CPU cooler to reduce the noise. Thank you for the comment bro💜🖤

@DannyBoycustom 5 месяцев назад

If you are talking about the fan on the water cooled Gpu my guess the fan is to cool down the screen attached.

@BioSSlon 5 месяцев назад

@@DannyBoycustom It’s not tube-based to cool it. )))) The only thing that the fan can cool there is the VRM zone.

@markusrasmussen374 Месяц назад

It's there to cool down the VRM. You should not put it to 0% !

@BioSSlon Месяц назад

@@markusrasmussen374 Makes sense, but there is one thing. A small fan at low speed creates very little airflow. Therefore, the effectiveness of this solution is very low. Otherwise it will be very loud.

@masgarrrrr Год назад

🤩

@duynhat638 6 месяцев назад

so contact frame is legit in PC build now

@user-kq2ph4jd9h 2 месяца назад

Вы указали температуры CPU, что с температурами GPU?

@SNAPSHOTREVIEW 2 месяца назад

I don't remember the exact GPU temperature, but since I'm using bottom fans, it shouldn't be bad!

@mawandaeed 11 месяцев назад

What are those cables sleeves bro

@SNAPSHOTREVIEW 11 месяцев назад

Hi! Thanks for your comment! The sleeving cables that come with the power supply I'm using, and commonly available from brands like Corsair or Seasonic. Thank you so much, my friend👍👍

@trevorbelmont4633 Год назад

Double sided tape the 2.5SSD?

@SNAPSHOTREVIEW Год назад

I guess it's possible but you can put the 2.5 SSD x2 on the tray. Thanks a lot 🖤💜

@Mobiletechvr 8 месяцев назад

Can the rx 7900xtx merc 310 fit in that case?

@SNAPSHOTREVIEW 8 месяцев назад

The maximum GPU clearance depends on the AIO cooler, the motherboard's graphics card slot, PSU size, and installation height. With a 3-slot AIO cooler and a 150mm PSU, the maximum GPU length would be 335mm. Hope this helps💜🖤

@Mobiletechvr 8 месяцев назад

@@SNAPSHOTREVIEW the cooler is a aio 240mm and a atx psu

@eonsi 11 месяцев назад

그래픽카드 180도 커넥터 어디서 구매하셨나요?

@SNAPSHOTREVIEW 11 месяцев назад

안녕하세요~ 요 링크 참고 부탁드려요. shorturl.at/kmnoF

@eonsi 10 месяцев назад

@@SNAPSHOTREVIEW 감사합니다!

@zemnoydis Год назад

Перед/Зад 140 мм можно поставить?

@SNAPSHOTREVIEW Год назад

привет, друг! Вы можете установить 120-мм вентиляторы спереди и сзади. Вы можете установить два 140-мм вентилятора вместо трех 120-мм снизу.

@zemnoydis Год назад

@@SNAPSHOTREVIEW my thanks, good luck in the development of the channel

@Nader-sama 9 месяцев назад

pcie gpu cable NAME PLS ?

@SNAPSHOTREVIEW 9 месяцев назад

Ah! PSU direct cables like the Seasonic stuff. If you meant the degree adaptor, please check this link! url.kr/adx54e Cheers bro!

@TheLucasGregory 6 месяцев назад

Song?

@SNAPSHOTREVIEW 6 месяцев назад

Sorry, bro! I used this on artlist.io, but I don't remember.

@fairycat Месяц назад

Corsair’s RAM😊

@fdjw88 Год назад

You probably could upgrade that GPU to a 6800XT if you go easy on the expensive Noctua fans.

@yuvanraj2271 Год назад

Yeah, the cpu can even handle 3090.

@fdjw88 Год назад

@@yuvanraj2271 An i5-13600k is strong enough to handle a 4090, let along a 3090.

@SNAPSHOTREVIEW Год назад

Oh thanks a lot! Absolutely agreed but I used RX 6700 XT for maching the ROG cooler in this video. I buy all the parts myself to build a PC and GPUs are always expensive in my limited budget.