Jumper T16 Page-Button did not work and how I fixed it

Подписаться 6

Просмотров 1,9 тыс.

50% 1

One Day, the page-button of my T16 did not work anymore.
My T16 is about 2 month old, i never had any issue with any electronic things within period of guarantee.
well, this was the first time, there is always a first time.
so i did some research, found some tips and this one solved my problem.
I hope this is not a re occurring issue.
keep in mind that warranty might end when opening the radio.
You might destroy your T16,if you are clumsy.
Best way to get it fixed: bring it to the reseller to get it repaired.

Опубликовано:

17 янв 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@BeefArena Год назад

The Roller and the Buttons did not work anymore. Both fixed. Thank you Sir!

@velikijoxotnik 4 года назад

Stupid ribbon cables. Opening and closing the connector on the ribbon cable to PCB board worked. Thanks for the video.

@mike_oe 3 года назад

Problem (identical one) solved, thank you! Daumen hoch :)

@BadBite 4 года назад

thank you, this worked for my scroll wheel and page buttons, had to re-seat both ribbon cables to get the whole keyboard working again.

@lawrencemartin8205 4 года назад

Fpv isfun ... i have a jumper pro V2 carbon hall sensors.. thank you so much for video. It helped me fix mine today.. telemetry button was acting as system button. Also was loosing functions in the menu's. Fixed mine as you showed by lifting lock pushing ribbon cable in locking again. .. awesome man thanks so much.

@twobrotherskayaking4736 4 года назад

Hey, thanks. Just replaced the roller and roller circuit board/holder w/switch on my older T16. Worked one time and then next time got the ‘stuck key’ error and the page key failed every time. So pulled off the ribbon-reversal gig and back to working. So far, good as new. Much appreciation fpv!

@akimondo 4 года назад

Great, i run into the same problem. Thank you.

@michaelthemaker692 4 года назад

Thank you this worked for me!

@epaschenko 4 года назад

Thank, very useful for me!

@kevintorevell2406 3 года назад

If you contact jumper by email they will send you a link to get a new upgraded set of ribbon cables, you only have to pay shipping!

@thezebiano 4 года назад

"Reverse the cable" in what axis? Roll or Yaw? Or maybe a combination of both?

@mike_oe 3 года назад

Yaw 180, aka swap the ends

@benfly3593 4 года назад

Hi, i have the same problem - did you change the button into a new one? - Why you did not show it?

@fpvisfun4983 4 года назад

hi, i did not change the button, i plugged in the ribbon cable reverse and this worked for me.

@fpvisfun4983 4 года назад

No I did not change buttons.

@bamboofpv8959 4 года назад

i have an issue where my scroll wheel only scrolls up not down....

@fpvisfun4983 4 года назад

Sorry to hear that. I have no fix fir for that. I am sorry.

@PYates77 4 года назад

I had this and after inspecting the scroll wheel encoder for debris and screwing it back in, it worked. I suspect the screws were too tight to begin with

@holzmichelsimbelhuber4963 4 года назад

was für eine gottlose scheiße. ich hab das ding 3 mal benutzt und aus dem nichts funktioniert dieser beschissene knopf einfach nicht mehr. (background beleuchtung geht allerdings trotzdem an, und in manchen menüs schaltet er auch munter durch, aber genau so wie hier im video). aufmachen kann ich das ding nich, weil die schrauben aus butter sind und sich SOFORT rund drehen. tja dann tausch ich sie eben um, kein problem -.-

@holzmichelsimbelhuber4963 4 года назад

update: ich hab das ding jetz tatsächlich aufgekriegt, und mit wenig erwartung das kabel umgedreht. und der scheiß FUNKTIONIERT TATSÄCHLICH WIEDER :D unglaublich.... vielen vielen dank!!! ist halt am ende doch nur n sehr sehr teures stück chinaschrott.. :D