Тёмный

Jumper T8SG V2 Plus DeviationTX Firmware upgrade Mac Windows 

kenVersus
Подписаться 23 тыс.
Просмотров 19 тыс.
50% 1

Опубликовано:

 

29 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 99   
@KenVersus
@KenVersus 6 лет назад
Jumper T8SG Plus V2.0 Multi-protocal 2.4G 12CH OLED Transmitter goo.gl/m1BTaY www.gearbest.com/radios-receiver/pp_1830710.html?wid=1433363
@artest7
@artest7 4 года назад
Anyone want to buy my Jumper T8SG Plus? When I went to update it, the screen looks like this now.
@Grumpyoldtwit
@Grumpyoldtwit 4 года назад
@@artest7 I had the same thing happen to me. I think you installed the wrong firmware. See my response on your comment below.
@BrianPhillipsRC
@BrianPhillipsRC 5 лет назад
Thanks for putting this together. I'm used to using Spektrum, so this stuff is like reading a different language for me!
@BrianPhillipsRC
@BrianPhillipsRC 5 лет назад
Great video! I was going to plug you in my video coming soon, if you're curious. Thanks so much for the help walking through this process. I don't know how you would figure this stuff out without someone giving a helping hand. I really appreciate your help. Thanks
@KenVersus
@KenVersus 5 лет назад
Link your video here and I'll check it out.
@BrianPhillipsRC
@BrianPhillipsRC 5 лет назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xYCawQoEH1w.html - Live tomorrow at 10 AM. Our internet is sloooooow here now, as we have to use Viasat :( 1mbs upload speed...maybe we'll have fiber here in about twenty years - LOL. P.S. Have you had any luck binding your Jumper to these planes... XK A130 / Y-20 WL Toys Boeing C-17 WL Toys QF-008 / Boeing 787 XK A150 / Boeing 747 XK A120 / Airbus A380 ...I'm having problems and wonder if I need to buy another transceiver to bind to them, or if I'm maybe doing something wrong? Flying these little beauties was kind the reason for my getting this transmitter, so it was disappointing to have issues with these planes...
@KenVersus
@KenVersus 5 лет назад
I'm not familiar with those planes. If you can find out what protocol they use, you can probably bind them. The deviationtx forums would probably be your best bet. They'll all eventually work when the devs can decode what protocol they use. But the manufacturers dont' make it easy.
@BrianPhillipsRC
@BrianPhillipsRC 5 лет назад
Thanks for the help, thus far kenVersus
@williswet
@williswet 5 лет назад
Excellent! Thanks for taking the time to make this tutorial.
@LPORT
@LPORT 4 года назад
Thank you for this video!!! I really appreciate the time and work you put in to it. Definitely made it easy to update my Jumper T8sg v2 Plus to a nightly build!
@arrancoote
@arrancoote 5 лет назад
Thanks, my t8sg transmitter had corrupted file system and the video helped me understand how to fix it, very much appreciated
@TobySexton
@TobySexton 6 лет назад
I greatly appreciate this. You saved me big time.
@carlosribesgarin4472
@carlosribesgarin4472 5 лет назад
Thank you. Sometimes things are surprisingly simple. I have tried with another cable and it works quite well!
@artest7
@artest7 4 года назад
MAC OSX USER>> Please correct me if I’m wrong but do I 1ST Dfuse USB Upgrade Tools 2.31.zip file which brings up Walkera Dfuse USB Upgrade Tools 2.31 2.exe file? 2ND the exe file Walkera Dfuse USB Upgrade Tools 2.31 2.exe ? Because, when i do that I hear the tone that it’s been complete but do not see anything else happen. No other programs are launched
@artest7
@artest7 4 года назад
It is OCT 2020. Can u PLEASE tell me which (if any) version/update or upgrades will get my Yellow Jumper T8SG PLUS ver. 2 (last updated using deviation-t8sg_v2_plus-v5.0.0-9e9beec). Do I need to add/upgrade some hardware to this radio to get it up to current working condition? Thank you in advance!! I'd appreciate ANY answer(s).
@76Macadamia
@76Macadamia 5 лет назад
Well done and I was able to follow up with you quite well. I just got into this hobby so might be having some questions for you later on.
@ujoel2
@ujoel2 4 года назад
Thanks for the video. My problem is that using your method, my T8SG will not even go into USB mode. When I click and hold the power and enter buttons as you did, the USB symbol appears but only as long as I hold both buttons down. The moment I let go, the screen goes blanks and the power lights turn off. If I try to enter the USB mode through the deviation software in the transmitter menu, then the computer does recognize it, but it tells me I need to format the device to use it, and I haven't wanted to do this out of fear of making things words and because I have no backup of my files. I can put this into Dfuse mode just fine. Have you seen this? What could be wrong?
@krisdroib
@krisdroib 5 лет назад
Oui c'est très bon, explications claires et nettes et ça marche. Merci beaucoup.
@whimpydogfpv8663
@whimpydogfpv8663 4 года назад
Very helpful, thank you
@larrybryans500
@larrybryans500 5 лет назад
Nice clear instructions! So thanks. However, like many viewers I have Windows 10. Please thinke about doing the same for this huge, growing users.
@berdrone1328
@berdrone1328 4 года назад
In my channel I have done the update with windows 10, in case it can help you!
@texasuavpilot
@texasuavpilot 4 года назад
@@berdrone1328 thanks and subscribed!
@nortizz
@nortizz 4 года назад
Thank you again so much man, you're incredibly helpful 👍🏼
@dstaron3162
@dstaron3162 4 года назад
Good work on the video. I can't find the user manual anywhere. Do you know where I can find it? Thanks
@moreausebastien6851
@moreausebastien6851 4 года назад
Hi nice tuto , but the only thing is that at 8min 51 anything is appearing on my computer when I m clicking on advanced or other options .Any help will be appreciated ,thanks.
@artest7
@artest7 4 года назад
June 8 2020 7:20pm PST: He Ken! I tried your firmware update and somewhere went wrong and now my screen is blank! I think it had something to do with the transmitter being labeled Devo and not Jumper during the update. Can u PLEASE help me to reinstall the software/firmware in order to get my radio back? I don't care about losing any models I may have added to it. Most of them are incorrect anyway and I'd rather start from scratch. So....Please Please can u (or anyone) give me instructions (or a link) that will show me how to do a clean reinstall using my Macbook Pro? Thank you in advance!
@tygger420
@tygger420 5 лет назад
Hiya there ken amazing job on firmware updates.Im new this is my first transmitter and setting up sticks and switches seems alittle over powering,Do you have any videos i want to set up and arm switch ,a speed switch,and an angle horizon acro switch and a buzzer if possible.been reading the manual but gets confusing.
@artest7
@artest7 4 года назад
Did u ever. get any help? I'm having the same issues as my 1st radio! C O N F U S I N G!
@vopter8712
@vopter8712 3 года назад
Thanks for this!
@maxartfpvperufilmacionesya5360
@maxartfpvperufilmacionesya5360 3 года назад
Hi I had a problem update de firmware but after finish I have the screen black in my jumper the radio funtion get en usb mode and dfu mode and bind with my dron but I ser two black bats in the screen... Donyou have idea about some Solutions... I will apreciate your help... Thankss
@quacksalber82
@quacksalber82 2 года назад
You are running the wrong fw!! Try another one...
@healharm9210
@healharm9210 4 года назад
Hey, nice vid, one stupid q: If i flash firmware the transmitter will forget my model setups?
@KenVersus
@KenVersus 4 года назад
You can back them up. Put it into usb mode and copy all the files over.
@healharm9210
@healharm9210 4 года назад
@@KenVersus Thankx a lot
@artest7
@artest7 4 года назад
HELP! MY SCREEN WENT BLANK: Can u please tell me which of these files I should be using to update the firmware on my Jumper T8SG Plus V2?
@Grumpyoldtwit
@Grumpyoldtwit 4 года назад
Same thing happened to me just now. I thought mine was a V2 plus, which is the firmware I downloaded. As soon as it went pear shaped, I tried downloading and reinstalling the V2 (not plus) version and it now seems good. (Phew!)
@alessietto750
@alessietto750 4 года назад
Hi, I have a problem with my radio, the external voice is not working. The t8sg does not see the sd card inside. Can you help me?
@Postit_all
@Postit_all 4 года назад
Where did you find splascreen and bmp image? i've download some from the forum but i'dd like to find a zip file because i've download my icons one by one and it was so sloooow!
@berdrone1328
@berdrone1328 4 года назад
I've changed the splash screen, I will shortly make a video of it. You can also create your own icons with gimp or illustrator in bmp format, I will explain it in the video soon!
@vidinvention
@vidinvention 5 лет назад
Thanks for this. I have a Frysky reciever XM+. Hope i have no issues when I bind it. I have it on order and I am kind of new to this stuff.
@KenVersus
@KenVersus 5 лет назад
It should work, make sure you choose FrSkyX in the protocol list.
@davesilva9174
@davesilva9174 4 года назад
Will this work to get my T8SG to connect to my iMac to play Steam flight Simulator games? If not do you know how? Thank you. -DS
@berdrone1328
@berdrone1328 4 года назад
you need to create a specific model for the simulator with protocol USB, then you connect with the usb cable, NO minijack. I hope I've helped!
@effinchet6228
@effinchet6228 4 года назад
and yes the instructions were nice and clear so I'm not sure what I did differently
@andrewcobb6464
@andrewcobb6464 4 года назад
How do u activate the voice mode on the t8sg v-3 carbon fiber?
@cesarango01
@cesarango01 5 лет назад
I am having trouble binding SBUS. Says, Re-Init. Any ideas? Thanks.
@MikeRM399
@MikeRM399 5 лет назад
hey brother what i should do with my radio t8sg i just bought it and when i turn it on its goes to USB MODE ?
@KenVersus
@KenVersus 5 лет назад
Hmmm maybe check out the forums. Here's the link www.deviationtx.com/forum/6-general-discussions/7995-t8sg-v2-plus-stuck-in-usb-mode
@Appolloscott
@Appolloscott 5 лет назад
Thanks Man U r a lifesaver
@flippyfpv3984
@flippyfpv3984 5 лет назад
Will this help with binding to frysky xm+ ?????
@Mikey19962
@Mikey19962 5 лет назад
What frsky is D8 on the jumper?
@cesarango01
@cesarango01 5 лет назад
Did all the process, but the DFU is not showing in the walkera updater. Any ideas?
@KenVersus
@KenVersus 5 лет назад
Try another USB cable.
@ketarap
@ketarap 5 лет назад
My jumper broke after the update. Can you make video how to fix it? I can't access the storage via USB 😥
@felix7120
@felix7120 5 лет назад
same here
@VladiG655
@VladiG655 3 года назад
Hi. how you fiх it?
@quacksalber82
@quacksalber82 2 года назад
@@VladiG655 Hello! I got the same problem with upgrade tool 3.0.5. I switched back to tool 2.3, and tada! windows reacted to the TX. Then I upgraded with T8SGv2 Plus (i have carbonversion plus) and tried again. Ok no blackscreen but not readable because of blackbars. Then I tried flashing with T8SGv2 5.0.0 (without PLUS) and now it works!!! Hope I can help anyone out there!
@donang6931
@donang6931 4 года назад
Hi there, I screw up my T8SG by doing the update, my screen blackout and it always in DFU mode. Anyone, please help to fix it? Thanks
@vasilisfellouzis
@vasilisfellouzis 5 лет назад
My transmitter won't go in usb mode what do i do now it wont turn on either
@eulogy1981
@eulogy1981 4 года назад
I followed your instructions and my screen got a bunch of black lines running through it. I have the t8sg plus v2 carbon
@tonysamaniego8710
@tonysamaniego8710 4 года назад
Same for me! Fix is to load t8sg v2 FW not the ‘plus’ FW.
@MALNTV
@MALNTV 6 лет назад
Would be helpful if you could update this video for Windows 10. Following your exact steps for setting up drivers does not work in Windows 10. For the time being, I'm stuck with the stock version of Deviation tx. Grrrrr
@Saruul_osman
@Saruul_osman 2 года назад
Same!
@eemirth165
@eemirth165 5 лет назад
at 1:50 how do you extract files... doesnt give me any of those options only open, cut, copy, properties , and delete. super lost..
@HaveFaithInGod
@HaveFaithInGod 5 лет назад
Right click on the .zip file. It will prompt with "Extract files?" dialog listed with other options.
@faisalramadani5316
@faisalramadani5316 2 года назад
Is this way or one way?
@effinchet6228
@effinchet6228 4 года назад
Hey bud I did this update to mine using windows 10 using your instructions Now ihave a black screen when I power on:( did exactly as you showed, any ideas?
@grun4405
@grun4405 4 года назад
hey! I have the same problem, do you have already a solution?
@effinchet6228
@effinchet6228 3 года назад
@@grun4405 hey, i ended up frying my main board so i have purchased another through ali express and will do the swap when i have some time.
@effinchet6228
@effinchet6228 3 года назад
Were you able to repair yours? I was able to purchase a new motherboard from "Ali express"
@quacksalber82
@quacksalber82 2 года назад
Hello! I got the same problem with upgrade tool 3.0.5. I switched back to tool 2.3, and tada! windows reacted to the TX. Then I upgraded with T8SGv2 Plus (i have carbonversion plus) and tried again. Ok no blackscreen but not readable because of blackbars. Then I tried flashing with T8SGv2 5.0.0 (without PLUS) and now it works!!! Hope I can help anyone out there!
@effinchet6228
@effinchet6228 2 года назад
@@quacksalber82 thanks for the info. I replaced the motherboard in mine and it works but I must have missed something (probably a wire somewhere in there) because the backlight doesnt work. Not a BIG problem as I dont fly in the dark but would be nice if it worked. Just scared to open it up again 😁. But all else works fine.
@TeeHau
@TeeHau 4 года назад
Why we need to upgrade? any benefits after upgraded?
@KenVersus
@KenVersus 4 года назад
If yours works I wouldn't upgrade. I haven't updated mine in a long time. I only do it if a model doesn't work and maybe the protocol was updated
@TeeHau
@TeeHau 4 года назад
@@KenVersus Thanks Ken, then i better don't risk to update. Cheers.
@MrBmw2444
@MrBmw2444 5 лет назад
Has anyone been able to get this to work on windows 10? I have an older PC that I upgraded to Windows 10 and works fine. New Pc Intel 7 and Windows 10 no dice, will not work. It shows the device as STM32 but DFuse will not work. Have Devo 10 and Jumper the same results for both.
@davidcanole3758
@davidcanole3758 4 года назад
i keep getting stm bootloader and not stm device in dfu mode
@A-mechanics-review-4U
@A-mechanics-review-4U 5 лет назад
For me as a new user alot of what you do is like charlie browns teacher to me, lol. I need even a little more detail, as you use so much geek slang i don't get.My fault, i didn't research the Jumper enough....I'm only windows mouse smart hehehe!!! Thanks for the info for real tho it all is helping me learn kenVs.
@williambernadi
@williambernadi 6 лет назад
Can i use it for walkera f210?
@KenVersus
@KenVersus 6 лет назад
It should work. It supports the Walkera devo protocols. But I don't have experience with that quad.
@williambernadi
@williambernadi 6 лет назад
thank you for your reply :)
@mpoerot8013
@mpoerot8013 5 лет назад
Installation is done at 6:23. Afterwards that's using a different tool.. I guess you should clearly mention this so people wouldn't flash the firmware twice!
@horaciostjeward
@horaciostjeward 4 года назад
that is for mac users
@imaginerstepaway9917
@imaginerstepaway9917 4 года назад
HI , even with this way to do , i cant see STM32 appear .., is it happened to someone ? thank you
@Saruul_osman
@Saruul_osman 2 года назад
Its happening to me too
@Saruul_osman
@Saruul_osman 2 года назад
Please let me know if you solved it. Im on windows 10
@TheMusikaBuena
@TheMusikaBuena 6 лет назад
Please add the win10 solution since this is only for win7
@doktordrone
@doktordrone 5 лет назад
mine is broken after upgrade, can you hep me please? thanks :)
@vasilisfellouzis
@vasilisfellouzis 5 лет назад
Did you ever get it fixed?
@HumbleHeartMinistry
@HumbleHeartMinistry 5 лет назад
My Jumper T8SG V2 will not bind to the FrSky R-XSR Receiver in my new iFlight Nazgul 5. I tried all protocols that are Frsky protocols in the transmitter. Any help would be greatly appreciated!
@KenVersus
@KenVersus 5 лет назад
I dont have this rx to test but check out this forum. www.deviationtx.com/forum/protocol-development/8446-frsky-r-xsr
@Grumpyoldtwit
@Grumpyoldtwit 4 года назад
Mac users... go straight to 6:24
@ujoel2
@ujoel2 4 года назад
I apologize... I have no idea why my comment posted 3 times like that. I only commented once.
@ujoel2
@ujoel2 4 года назад
Thanks for the video. My problem is that using your method, my T8SG will not even go into USB mode. When I click and hold the power and enter buttons as you did, the USB symbol appears but only as long as I hold both buttons down. The moment I let go, the screen goes blanks and the power lights turn off. If I try to enter the USB mode through the deviation software in the transmitter menu, then the computer does recognize it, but it tells me I need to format the device to use it, and I haven't wanted to do this out of fear of making things words and because I have no backup of my files. I can put this into Dfuse mode just fine. Have you seen this? What could be wrong?
@KenVersus
@KenVersus 4 года назад
Try to quickly tap the power and release. Dont hold it.
@ujoel2
@ujoel2 4 года назад
I apologize... I have no idea why my comment posted 3 times like that. I only commented once.
@davidcanole3758
@davidcanole3758 3 года назад
Than delete 2
Далее
Setup Jumper T8SG V2 PLUS for any Simulator
4:39
Просмотров 10 тыс.
Turn an Old PC Into a High-End Amiga with AmiKit X
29:29
How to setup Jumper T8SG with a BNF Racer
27:04
Просмотров 12 тыс.
Getting Started with Meshtastic - Devices
15:01
Просмотров 220 тыс.
Full video - Data recovery from a dead MicroSD card
16:01
JUMPER T8SG DEVIATION ELEVON SETTING UP
6:26
Просмотров 5 тыс.