Jura E8 Refurbishing and Deep Cleaning 

Wow your attention to detail and ease with which you manipulate the parts is impressive. I would not trust myself to remember how the many parts fit back together but for the large amount of money invested in this machine can see how very useful a thorough service would be to the longevity of the machine. Is the descaling fluid you used is readily available to purchase? Thanks for your very instructive video

Hi, my E8 has been refurbished according your instructions. Il works perfectly now. Many thanks from France !

I don't even have a E8 but finished watching the whole thing... very fascinating

You saved me at least 100 EUR. The grinder was clogged, and I managed to get rid of the cohesived layer. I did all other shown maintenance as well. Now it is new. Thx a lot. :)

Thanks so much. Managed to do about 80% of what you did before found this video. How I can do so much more now! Mine was so much more dirty than this one😱🤢

Wonderfull video and extremely details. Thank you. My nozzles that the coffee comes out off are clogged and I have not been able to get to that particular part. I am afraid I won't be able to put it back together if I go that far. I may have failed to descale regularly. Any suggestions?

Beautifully produced content, each shot of the repair is amazingly informative and actually relaxing to watch.

Im really impressed! Its almost good condition. I owned Philips EP2231. It served for 2.5 years, i cleaned every week and month as in manual, cleaned, descaled, applied silicone everywhere, it's like new BUT it used to broke 2 times. After 6 month first problem - motor for the brew. Then it electromagnetic valve or something like that.. Now looking for Jura or Delonghi

Thanks for this - we're cleaning the brew group to get rid of an e8 error. Small tip - at 05:53 you pull the connector from the front panel assembly by its wires. I'd pull them out by the plug.

Absolutely good manual! Very detailed and everything looks so easy. I am in the middle of cleaning my E80 with it! Thank you!

Excellent Work again. Congratulations! Good to see the Delonghi cup at the end of the video. 💪 😎 Greetings from Hungary.

I am glad I bought the DeLonghi ECAM magnifica! It costs a lot less and is much easier to keep clean! It is a shame that manufacturers make sure that you do not let the user clean the parts that come into contact with food. Fortunately, I am very technical and mechanical and think your channel is an absolute winner!

Fantastic, just what I was loooking for. I have a waterleak so now I know how to get on to it.

Thank you for your videos . I just got the same machine to restore . Question , when you took the grinder apart is it supposed to have the 3 balls and springs like older juras, the piece you brushed off. Was in 2 parts

Thank you for great instructional video. I have a problem with a WE8 model very similar to this one. Once every few or a dozen or so brewings, the coffee does not appear in the cup and the ground coffee falls into the grounds container and the water into the drip tray. The machine is only 4 years old and has made about 13,000 coffees. Could you suggest what could be the cause?

Thanks for all your videos, they're super therapeutic and satisfying to watch. I've been struggling for over a month now to find a disassembley video for a Jura ENA 4. I'd like to clean the insides. But I've found absolutely nothing online showing how to open and dissassemble/clean it. I can't even get the panels off safely. I wondered if you'd consider doing a video on it? I'll happily sponsor if I can.

I was looking for such a video instruction to clean my E8 after 3 years. but now I understand that there is no need to do this for another 2-3 years))) I use cleaning products when the machine recommends. the only thing I would like to change is to make the grind even finer. is this possible other than what can be done with a lever? Great job!❤

To be 100% the cup at the end should be JURA instead of Delonghi. :-) Thumbs up for another great video.

Hi there ! What an impressive job ! btw what Proxxon sponge do you use to polish the plastic panels ? and where do you buy your Jura parts ? thanks !

Thanks for sharing such a high-quality video! Our local Jura agent is not interested in servicing our 7-year-old E80 coffee machine unless it has broken. As I am technically inclined I decided to find a good instructional video so that I can do it myself. I am not prepared to wait until my nice, expensive coffee machine breaks! Your video outdid my best expectations- many thanks! Now just to get the right tools, some spare parts and find a day where I can peacefully tackle this project without any interruptions- and re-watch your video as well as the second instructional video about the brewing unit. After watching your video I realized that the local service center would definitely not even go through half the amount of trouble and care that you did, so I definitely will not take my machine there. I will do it myself in a proper manner like what I have seen you do. I Keep up the good work! Anita

Trying to keep the cup tray from getting scratched up is a trick. I have two methods. You can use a silicone coaster. They are available in many colors and designs so you can find one that suits your aesthetic sensibilities. Or you can stick on a sheet of adhesive clear plastic, trim it to fit, and then cut enough out to allow drips to pass through.

wpadłem przypadkiem i widzę świetną robotę, super. Jakie to na filmie wszystko łatwe a wiem, że pracy bylo wiele godzin. Osobiscie taki serwis zajmuje mi ok 6 godzin bez polerowania. Dokładając polerowanie myślę, że spokojnie z 2-3 godziny dłużej. Pozdrawiam

Ein herzliches Dankeschön für ein gelungenes äußerst hilfreiches Video. Absolute Spitzenarbeit. Ich habe zwar bereits gelesen, dass Du keine Dienstleistungen diesbzgl. anbietest, aber falls sich die Meinung dahingehend einmal ändern sollte, habe ich noch eine Jura Impressa Z7 welche uns ca. 15 Jahre treu begleitet hat, leider jetzt defekt und komplett undicht im Keller stehen und scheue mich immer noch, diese zu entsorgen. Schade ist es auf jeden Fall drum. Ansonsten kann man sehr viel hilfreiche Tipps aus Deinem Video mitnehmen. Danke.

Super Video! Habe meine E8 damit wieder zum Laufen bekommen, da die Brühgruppe einfach komplett verdreckt war!

Question, if I may. When making a cup of coffee, the grinder and it's plastic fan stopped rotating. I started hearing the motor inside of the grinder assembly spinning much faster then it usually does, with the louder, whining type of noise. The beans stopped moving down the grinder funnel. After a few seconds, the motor stopped. The machine showed a message, asking to add coffee beans, even though there were plenty of beans in the bean funnel. I disassembled the machine following your instructions. Accessed the grinder and found a piece of metal stuck in there. After I removed it the debris, I took of the fan, the grinder cone, the cloth washer, cleaned it all up. It did not look damaged or skewed. Everything assembled straight and flush. Put it all back together. After the normal warmup and prep, I initiated making a cup of coffee. The grinder started rotating normally, moved some beans in, but in a few seconds, without any visible reason, the fan and the cone just stopped rotating, beans stopped moving down, and the whining sound reappeared. Have you encountered this problem before? Do you think there is a chance of fixing this, or do I need to replace the grinder assembly? It's kind of expensive. :((( Thank you for your time!

Amazing job, great video. Thank you for sharing this. We have an E800, but they shall be almost 100% identical. The video is around 30 min, but how long did it take actually to do the refurbishing and deep cleaning? What was the cost of the parts you replaced?

Great video! I got courageous enough to deep clean my E8. Almost got it done, but I can't figure out where 2 parts should go. Can I send you photo of those 2 parts?

Suprising that the maschine is not in a worse shape. Kinda shows the quality of Jura.

Hello and a real thanks for your job! Question: Do you sell the tools and gaskets to refresh this E8? Otherwise could you tell me where to buy ? Merci from 🇫🇷

Great video !! What are the spec of the replacement hoses at 18:10 ?

@myworks I am continually impressed with your videos and workmanship. Can you please provide a link to the mesh hose that you are using to replace the old hose at 18:10?

Great video, very relaxing seeing the restoration. I wondered if you might be able to give some advice on my Z5. It is a US model that I brought back from the US to UK and have been using on a transformer for several years without issue. The other day the milk spout was not working and the water was going into the grounds bin. I wondered if a pipe had popped off or split and took it apart but couldn't see anything obvious. Put it back together and it was the same so I thought it couldn't hurt to try another descale. After the descale, I got the refill tank message but after doing that I now get a system fill message and the pump/regulator appears to be making a different noise. Because it is US model it is unlikely that any local service agents would be willing to service it.

Wow…Klasse Arbeit und super Video….ich habe immer großen Respekt vor Menschen, die sich sowas zutrauen und können. Wieviel Stunden hat diese Restaurierung gedauert?

Hi from England, absolutely love this channel. I have just got a Z9 from a friend to keep so will be overhauling it with the aid of these amazing videos. Attention to detail is a lost art in today’s world. A question please? When you soak the parts you use washing soda. What is this exactly? Dishwasher powder? Non fragrance Laundry powder? I’d like to get the UK alternative. Well done on your work 🎉

This is a brilliant video. Thank you so much.

great video ! where you got the hose from? It is not in amazon list of things you bought I see! Can You send a link or part name/number? (hose)

Great! I was wondering how inside looks like after some years used. 😊

Super materiał, Jaki jest koszt takiej renowacji i po jakim czasie/przebiegu dobrze taką wykonać ? Czy stan tego ekspresu świadczy o tym że nie był czyszczony/konserwowany zgodnie z interwałami producenta czy po prostu one z czasem się tak zasyfiają ? Pozdawiam

thanks for this wonderful video!!! may i ask: how do you know whether you need to replace the grinder or not?

Thanks for this high quality video, the camera work is also extremely sharp and detailed. My Jura E6 EC is approaching 2 years old & 4000 brews, I'm thinking about a (smaller) tear down for a deep clean. I guess it will be 95% identical to an E8 teardown?

Nice video!! I've been searching for the valve replacement at 17:00. What is the name or number of that part, because I've got no luck finding this part.

Fantastic video. I am struggling to get the original clamps back on hoses. I noticed you used a different type of clamp. Any help or video on getting the original clamps back on?

Great video, thank you for sharing. I have a question about the brewing unit, if you take it out and clean it, what's the starting position to place it back?

Is there a link where I can buy only the black plastic grinder part with wings under the blade in this video at 13:31? The grinder motor works normally, but the ground coffee is stuck inside the grinder.

Thanks for the helpful video. Did a deep clean on my E8 following this video. Now is the E6 15070 similar to the E8 in terms of cleaning out the brew unit?

Great video! So helpful! I was able to clean it nicely. However, I'm still getting dry grounds in the back of the drip tray. Any idea why?

Thank you from the USA. I have an E8. This was interesting.

Thanks for this video. My machine was leaking and it was coming from the discharge valve. Upon removing the pin with the red pointed tip I realized it was worn and may be the problem. I have a question though. The pin replacement kit comes with 2 additional replacement gaskets (3 total). Do you happen to know where those gaskets go in the discharge valve assembly? Thanks!

Thank you.. Greetings from Holland...

as a Jura technician, i have to say this machine actually looks exceptionally clean for being in use for 6 years. I've seen machines that would give you nightmares after just 3 years

Love the video's. Do you know the diameters of these internal water tubes? I bought a used ENA 7 and i really want to replace all the tubes besides the O rings etc.

Encore un superbe travail 👍. Pour moi , ce sera un latte macchiato , svp 😉. Bravo , 👏👏👏👏👏.

Fantastic video, thank you. I just followed your instructions, but have one small part that I don't know where it goes. How can I get a picture of it to you?

Wartest Du die Maschinen auch im Kundenauftrag?

Hi, what and which size tools you used to unscrew bottom back cover ? It’s 2:11 on video.

Great video At 17:01 you recommend replacing the valve- what is the part number? What is the grease you are using?

I am wondering how many hours do you need to clean it all? And do you sell the tools you need particularly in this video? In your point of view: do you recommend for a beginner to try to refresh his E8 by his self? Many many thanks because I ask you for this video and you did it Merci from Paris 😉

Great video! Is the mold inside a health risk? My E8 works fine after 8 years, should I still get it serviced and cleaned?

Does the automatic cleaning process of the machine cleans all the brew group, avoiding that amount of residual coffee?

Thanks for excellent video. 18:54 why didn't you replace the hose there?

Great Job , how much this should cost for refurbishment of my own machine ?

Heyy wirklich sehr tolles Video sehr schön gefilmt ich habe ein Problem ich habe auch eine Jura e8 die nicht mehr funktioniert die zieht kein Wasser mehr im Display steht system wird gefüllt es passiert aber nix liegt es am verstopften Zulauf oder ist die Pumpe hin ? Danke im Voraus

Man, you are totally a master at this! Jura units are notorious for being difficult to take a part and repair. Amazing job again! I am curious, where do you get your parts from? I am from the US and it's very difficult to find superauto parts.

I like your videos! I am a fully automatic coffee machine repairer myself, and I can imagine it must be so difficult to video the process! But I appreciate your videos. Quick question, how do you remove the scratches from the plastic panels? I see you mention the Menzerna compounds, but what rotary tool do you use? Do you go through the three different compounds(heavy, fine, polish?) Is there any technique you recommend? Thanks

Thanks for this amazing video! I am almost done. One question mark remains after extensive online searches: how to remove/replace the rubber o-ring from the inside of the water tank (it's too narrow for me to reach with my arm)? I couldn't find any instruction on this online. And I also couldn't find out which ring size it is -> its not even mentioned on the Jura technical drawings. Is it a standard o-ring or is it especially produced by Jura?

Dziękuję. Cała operacja zakończyła się sukcesem :)

Waou you did it !!! Thank you 🙏🏼

Great video, thank you! How much work time do you estimate to carry out the entire disassembly, cleaning with reassembly?😀

Congratulations very amazing video! Why you chose to use citric acid to clean the water thank and washing soda for the other plastic parts? How can i clean the drip tray? Thank you in advance for the help 😀

Thanks for the clarification. Saved the day !!

My E8 drip tray has jammed in position - I think I tried to remove it too soon during operation. Is there a way to free it? Awesome video - Too much for me to tackle, though!

Hello again . I am a big fan of your videos the have helped me so much . I have a question. I hope you can answer.. I just finished my e8 restoration however the scraper blade on the brew unit cracked and glue is not holding . I have extra v2 blade but not sure if it would be an issue in the e8 that has the newer v3 version .

Wery good work! Congratulations 🥳 Tell me please, where you buy new Front chrome grill (from new E8)?

Hallo sehr gute arbeit geleistet! ich habe ein problem mit mein jura E60! ich bekomme nicht die kalibrierung der endkoder und brühgruppe! da scheint was nicht richtig zu stimmen! bekomme die fehlermeldung 8, muss der endkoder auf die brühgruppe angepasst werden? oder reicht den endkoder einfach anklemmen ohne da was zu machen? ich hoffe sie können mir helfen. In vorraus vielen Dank.

Thank you for posting! What kind of bit are you using to remove two screws on the back/bottom? (You show it briefly, but it's hard to see what it is. Time stamp 2:06). Thank you!

Witam, proszę o informację jakiej pasty używasz do polerowania plastiku? Pozdrawiam Łukasz. SUPER filmik

Vielen Dank für das ausführliche Video, würdest du empfehlen alle Dichtungen auszutauschen wenn das Gerät so alt ist wie das hier im Video?

Interisting! i have a jura the voffee residue is dry, eventually the coffee dispensed is lite. what could be the reason?

Moin, gibt es allgemein ein Werkezug was du empfehlen kannst für die Wartung? Das lösen vom Schlauch, der Grinder oder das mit der Spitze. Super Arbeit

Hello, good video. I have cleaned the brew group but I think something went wrong, when placed the brew group back in I heard a lot of rattling noise. I have determined that this comes from the brew group motor that keeps spinning even when the white gear is already at the top and can not go further. Then I decided to turn on the machine without the brew group in place and see that the motor keeps spinning and does not stop. Do you think this is a bad encoder or something else that is wrong?

Ein ausgezeichnetes Video über die E8, vielen Dank dafür!

Very informative video. You've done a great job! Thanks a lot!

Top Video. Hat mir heute super geholfen meine Jura zu reparieren. Mal ne Frage , die neue Tropfschale passt die auch bei der E80??

Habe meine Maschine heute auch auseinander gebaut! Vielen Dank für dieses tolle Video 👍🏼

Hallo, unsere E8 geht sporadisch und spontan einfach aus, sogar bei der Zubereitung des Kaffee Getränks. Gibt es eine Anleitung wie man an die Hauptplatine ran kommt wo man sich dann die einzelnen Komponenten wie zum Beispiel die Gleichrichterdiode genauer anschauen kann?

Thank you for your excellent videos. After I did a cleaning I do not think I returned the brew group to its basic position as I no longer get pucks in the coffee ground basket. What is the Basic Position?

ok…where can i ship mine for all this?

Its probably too early, but Z10? Also, what is your opinion on using very soft water?

vinegar works also! Instead citric acid. But this is sick what you did. Great job. I just sent my E8 EB for repair, god damn milk is frothing like maniac big bubbles. Air is leaking somewhere

Hi, super Arbeit. Machst du das auch für Endkunden? Grüße aus KA.

Beautiful! I wish the part pricing on Jura was more reasonable :( I have two s( machines, and both have the same chrome peeling on the spouts, any idea what is causing this?. Is it just a cheap manufacturing ? Thanks

Świetna robota. Mam zamiar kupić taki ekspres E8 EB. Czy polecasz ten model?

Thanks for the Great Video. I have a 4 year old E8 and there is a water leak where a white reinforced hose connects to a drain valve Y (shaped) near the middle bottom of the machine. At 17:28 of your video you show the type of hose that is leaking. There are 3 of these reinforced hoses and the one that's leaking is the one you can't see in your video. It is just underneath where your working. I believe just the clamp is the problem. The hose looks good inside and out. okay, so I am going to try to order some of those single ear clamps you suggested. However, where can you get these high pressure reinforced hoses if I need to for future reference. No luck finding them anywhere. Thanks again.

Okay have you ever come across an issue with the screws on the brew group. They are not screwing back in. Any idea they don't look striped.

Em...how did you open it? What is the opening sequence?

Вы большой молодец!👍Люблю свою Jura,лучший кофе,надо ухаживать за машинками они все без исключения грязнули),но эту запустили очень сильно.Успехов в работе!🖐

Do you predict any problems with direct water line supply for this Jura e8? Can it be done? Can I ship my machine to you?

Hi is there anyway of being able to adjust the position of the opening to receive coffee from the grinder in the brew group? when brew group cycles always end with opening 1/2 closed?

at 18:25 You have used different hose clips/clamps (not the ones you removed). Why? Are these new better? What would be product code? Thanks!

Great video! Wouldn't it be easier to first vacuum everything?