K3-VE Cylinder head replacement with Timing Chain Set up 

Thanks for the video,very helpful. I have a 1.5 Terrios. Not much problems as I change my oil and filters often. Replaced coil packs and had to repair the Gearbox. The lay shift bearings siezed up and broke out of the housing side by the bellhousing side. Had a great gearbox guy weld it up and replace bearings and seals.I suspect it left the factory with hardly any oil in the box. When I did the clutch kit previously I filled the box with 2 liters of oil. I did buy it from a friend at 80000km and he did tell me about the gearbox noise. I just never got round to stripping it and replacing the bearings and seals. So I could have prevented this failure. I did think it strange that the box was noisy at such low milage. I want to throw off the emission crap that's on it and put a oil catch tank on. As it is a direct injection. In my country it's not a problem to run without smog controll. Do I need to reprogram the computer or can it relearn itself after I throw all that stuff off?. Any help would be appreciated.

thumbs up Killa.... I've had to replace the timing chain on mine K3 VE (Dai Sirion), nice piece of memories just came back here... (eventhough we've decided to leave the engine in the frame)

Dope, I'm in the process of changing my cylinder gaskets, So awesome Video!!

Very good job mate you looks very professional good luck always

Thenks a lot i like your video it helps me to understand how to do it your student from Algeria

great video sir.. what size is the head gasket u use sir (thickness mm?)

Excellent video. Could you possibly share the repair manual

very nice

Hi is this a interference motor or non interference motor. Thank you your video is Brilliant

Nice bro

Hi Sir, what is the torque of exhaust timing sprocket? I have Toyota Avanza which needs timing chain set replacement so I will do the replacement myself :). Thank you for your video

what is the size of the cylinder head bolts i cant seem to the size specifications or which socket to use for that specific bolt online please help

What is the size and type bit that unscew the cylinder head bolt?

Hi sorry for noob question is all K3 engines from Daihatsu n Toyota .. drive train the same eg ..the steering rack ? as Daihatsu Sirion 1.3 K3 .series. vs the Toyota Bb 1.3 K3 series .. as wanting find a steering rack from the many sirion wrecked cars here put in the Bb .. cheers

Thanks for the video sir..do u have the standard valve lifter clearance for intake and exaust?..

Hi, nice video. Are you using 1/2" M9 Cylinder Head Bolt Tool ?

Hi I noticed that you have not inserted the lock for the timing wheel, I needed some clarity on that.

Hi sir Just out of interest, does overhauling this engine might be better compared to swapping engine. What are the pros and cons. What are the expected cost? If the overhauling is done, how long can the engine last until the next overhauling is needed Thanks in advance Your feedback would be much appreciated

When and after how many kms should we replace the cylinder head ?

Sèems you.are putting too.much silicone cause it might end up.in those oil channels and block it. I think you need to use your finger to even it out. What do you think?

Is the engine clean since you disasemble it? Or you clean it after disasembly? I really have a problem with cleaning the mess (sludge and muddy oil) i use everything brake cleaner, presurised water nothing's working

I have a 2006 Terios.....What is the vin Number for that car? Mine starts with JDAJ102G.... so the 102 series....do this have timing Chain AS Well or timing belt?

Can I put camshafts from k3vet to k3vet2? Because I can't find the original for my k3vet2 ... please help

Can you do more videos in this engine ? Like weakness etc ?

How if the yellow markings at the timing chain missing? Really need help. Thanks

Hey, do you know where i can find timing chain kit online? or which brand you recommend?

Can you give me the part # to order a overhaul kit for 2001 Daihatsu Terios 4 cylinder 1.3l

hi, i think i'm having trouble timing the engine, the tentioner lands right between two tooths and im left with a bit os slack between the camshafts, is it normal?

Whats the name of the part that appears on the front of the engine cover at minute 13:12? It kinda just pops up there😅

hey do you know where i can get i of that engine block

sir..how to set the chain into marking in exhasut sprocket..i two mark..which one?

Hey mate whats the firing order

Sir gud morning po magkano po ngayon ang toyota avanza 2007 crankshaft

12:30 прокладка тройная вылетела из передней крышки двигателя и прилипла к головке двигателя в неправильном положении! Из за этого не будет давления что бы работала муфта vvt-i и двигатель придётся снимать ещё раз. Это большая и грубая ошибка при сборке двигателя

How durable is this engine I have broken 94 km has passed overheated

الفرق بين k3 و 3sz ???

My car has same engine and has bad head gasket as well

Only 1 time 90 degree sir?

Valve adjustment....?? 🤔

12:27 you can see vvt gasket sitting wrong place

Hi mate I have a 1997 J100 looking for parts would you point me where to buy from , I'm located in Fiji any help will be appreciated , thanks mate

Hi

oring vvti !!!!!!!!!! fail install 12:29

vvti oring is out position !!!

very sloppy job 😂