Just received mine and water mist doest not coming out at all. i thought they sent a faulty product.thank you for the video. just fix the rubber sealent . i take it out and put it back properly and firmly. now its working fantastic. thank you
@@alex.k5057 Good day to you, my nano spray gun dropped on the ground can't functioning now 😭 The air the light is okay, but the motor can't suck the liquid out🤧
@@yinpengsoh152 these hacks should do the job. as it doesn't maintain high pressure but enough to provide suction effect. 1. 3 sec glue the crack 2. white tape n cable tie the bottle neck. 3. hot glue / 2 tonne glue to permanently secure the crack. let it dry before attach it to the spray gun. goodluck
Hi I Hope you can answer my question mine only squirt water after i turn it off. When i turn in on no water si coming out then if I turn it off water starts to come out. Thanks
Please check you press that hose got leaking at front? Has water come out means water line hose is ok. Mist doesn’t come out mostly is air hose line not enough air come out with water hose.
hello @alex.k! just got my k5 nano and no motor sound also.. but blue light lighting up. Any idea how to fix this? thanks! i tried charging it and same.
@@alex.k5057 Sounds so complicated to fix it. The blue light issue found out upon receiving it. Will be returning to seller. Appreciate your quick response ya. Thank you.
Means the air return back to bottle, maybe your bottle got crack or rubble seal not install properly? Or maybe front side head block the. The air return back to bottle got bubbles?
mine come with missing tube. i tried unused tube i found on my house but the circle things at the end of the tube, i not sure what it is. my spray machine not working
Hi Alex, good day to you. I have checked and found that mine one is the hose keep dropping so only air coming out. After installing it probably still drop again for many times. May I know how to tighten it to avoid it drop again? Thank you!
@@alex.k5057 the hose that connects the bottle of the hand sanitizer liquid. It keep dropping after 1 round of spray. Not sure how to tighten it although I have tried cable tight and rubber band.
@@wongpakchen6191 you can use some knife cut out abit at the plastic place, make it become got some rough line. But you need slow slow cut, don’t make the connect tube brake or broken. U understand?
@@alex.k5057 good morning Alex. You meant after cut a little bit short of the hose and to make the rough line is inside the hose correct? The rough line to make it not so easily to slip and slide down from the connection tube correct?
Hi sir... Mine is motor cannot stop running even turn off.... When on mode,all ok but when turn off motor still running but light already turn off.... Can u help sir??
K5 problem is the Hose Tip is Too Short, hence, the pipe will easily come out from the tip, you need to use a sand paper or tweezer to scratch little on the tip & then apply super glue & fix back the pipe & wait dry for one day, then, will be ok. Manufacturing Defects 😓😓😓
It is model K5? Or other products? Some of spray gun spray out many water. If K5, maybe got block at air hose or front side? Please try press the air hose let water refresh inside hose and head hole.
@@alex.k5057 is K5 model, will try press the air hose let water refresh inside hose and head hole ~ do u know is there any fake K5 or no? If yes, do you know how to check original or not?
@@bojio4569 At market too many fake K5. I think maybe original 1 is the words "Nano Spray Machine K5" is Print in body and no the sticker 1. My 1 I think is Fake. Because is sticker 1. I still finding original 1.
@@alex.k5057 i din try out press the air hose let water refresh inside hose and head hole, i go and replace another gun from the shop. Now the new gun want to turn on , need to press and hold the power button 2 seconds only can turn on. The words "Nano Spray Machine K5" is printed in body.
