My2016 Kadjar CarPlay. 18 months ago I had an official V7 install that didn’t go to well. The installation, in its infancy, 1% failed leaving the headunit non operational. There are two versions of headunit, and several variants of this, according to the part numbers which I believe is the loaded software for variants of car/model. I chose to go down the official route with the intent to somehow get CarPlay working believing it was a power problem. So under warranty, the headunits that didn’t take the new software version were replaced by Renault. Eventually after a Worldwide shortage my headunit was replaced. I reconfigured some settings and left it, I was without a radio for 8 weeks and 5 trips to the dealer for them to report back to Rfrance, I was just glad to have music again. I knew the risks, it was the dealers first attempt, the Clip diagnostics update arrived while I was there, that’s how new it was. With the headunit changed, I basically left it a year not really interested in trying anything and also too busy at work until lockdown. It is well know, how to activate AA and ACP, developers mode or Ddt4all from information around the web. I knew Android auto worked, I tried my works phone, plugged in and tested, but I’m an Iphone user. When plugged in, the Rlink2 recognises the iPhone and lists it in the ‘phone’ device list, but connects then disconnects not running car play this was believed to be a power problem. I had seen a video quite a while ago, again now popular content on RU-vid, of a talisman and the newer replacement USB port working, there’s not a lot of info on this. A forum member offered to send a USB port to me to try, needless to say it didn’t come, so I sourced the part myself. My local breakers yard which is a national company advertise Kadjar damaged breakers. I ordered a USB port from them from a 2020 model, needless to say it wouldn’t work, not even power up, at first I was thinking it was a miss match error and was disappointed until I found out the car had been in a river! The supplier searched all the Kadjars they had, all of them water damaged, well all 2. I turned to eBay found a supplier with a 19 plate Kadjar breaker, asked some questions ordered and the part arrived 3 days later which was fitted, the video shows the fitting process and was the initial installation. Its clipped in so attempting to remove it without taking the top of the console out would result in damage. Conclusion, I’ve held back going with this as there are still questions unanswered, I have been trying! What I do know is the USB block was all that I needed to do to make this work. Getting one proved difficult, they are either water damaged or from early models. The question I can not answer is this, is my headunit different to the original unit, ie a newer model. It’s always been believed, it is like for like replacement. The only way to find this out is for the ports to be put in to a car with the original head unit that has had the version 7 update. I can’t guarantee it will work on a different head unit but this is how we find out. The port will just plug in, I did a soft reboot and I probably didn’t need to. The USB port, part number, I used is 280239665R, picture along with the water damaged first attempt. This was from a 2019 Kadjar damaged car on eBay.
Hello man. What is your software version on your kadjar 2016? When you replace this. I have 2.2.19.300 and i found a (280236599R -2018 kadjar) Its will work?
You are located in the UK, right? I would pay you to do this and a Rev camera too ! I’m so Desperate please !! I just bought a 66 plate Kadjar signature nav and I’m dying 😭
Hello and thank you for sharing on Apple Carplay. Could you give me the reference of the box that you mounted, I have a Kadjar from February 2017 which is not equipped to use Apple Carplay, and possibly where you got it please? Thank you for your help, best regards, F-X
