Kali Linux - Disable Nouveau driver and Install NVIDIA Driver with CUDA Tool Kit Debian 12

Подписаться 5 тыс.

Просмотров 16 тыс.

50% 1

This instructional guide will provide a step-by-step procedure on how to install NVIDIA Driver and CUDA on Kali Linux, a Debian-based operating system. By following the instructions provided, you will be able to successfully install the necessary drivers and tools required for your NVIDIA graphics card to function optimally on your system.
Since the steps are similar on Parrot OS, you can use the exact instructions that I made for Parrot OS.
➡️ Step-by-step instruction: bit.ly/46teM8b
➡️ Uninstall instruction: bit.ly/46seUEU
➡️ Should you find this tutorial helpful, we kindly request that you consider supporting our channel by subscribing to our RU-vid channel or using the affiliated links and URL shortener links provided below. Through your purchase using any of the given links, we will receive a small commission, which we will use to expand our channel and enhance our services. We appreciate your support, and we remain committed to providing you with quality content.
⚠️ FTC Disclaimersysadmin102.co....
♡ Ways to support: sysadmin102.co...
🌐 Website: sysadmin102.com/
✉️ Business Inquiry: service@sysadmin102.com
© SYSADMIN102™ LLC

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 102

@AilingUncertainty 6 месяцев назад

For my case it boots up to a blinking cursor after disabling nouveau, the cursor stops blinking after few seconds but nothing happens after, doing crtl + alt + f1~6 does nothing, only crtl + alt + delete works, which is rebooting the computer

@sysadmin102 6 месяцев назад

Are you using Kali? If so, boot into safe mode.

@siddhantbhardwaj7866 6 месяцев назад

Same here, getting black screen after rebooting. Not getting tty

@sysadmin102 6 месяцев назад

Hvae you try boot into safe mode?

@crezilinxefizem2516 5 месяцев назад

@@sysadmin102 I have the same issue as him and safe boot mode didn't work either. I am stuck using terminal mode for the time being.

@zainalgarady258 7 месяцев назад

After i type last command 'reboot' the screen is freezing in dragons image ? What the resolve

@sysadmin102 7 месяцев назад

What happened after you manually rebooted?

@wensescheffers5811 4 месяца назад

After i reboot i will get the kali lunix thing where i can go in afvanced options or normal boot if i do notmal boot i will jave a _ that blinks after it will ho way and my screen tays black its still on but it stays black

@sysadmin102 4 месяца назад

Meaning your Nvidia wasn’t loading or installed properly. You can follow my tutorial in the description to reverse it back to the generic driver.

@رفيقالاحلام 4 месяца назад

Hi when i use this command ( sudo update-initramfs -u ) the output is W: Possible missing firmware /lib/firmware/i915/mtl_huc_gsc.bin for module i915 W: Possible missing firmware /lib/firmware/i915/mtl_guc_70.bin for module i915

@sysadmin102 4 месяца назад

i915 is the Intel Graphics Driver.

@xdanic3 10 месяцев назад

I've been watching many videos because always the blaklist step seemed hacky, but thankfully everyone does it the same. One thing you didn't do was installing dependencies, something others do is letting the nvidia.run disable nouveau, after viewing more videos I prefer doing it manually since it doesn't seem like "hacking", I would also think going into other higher tty would be better, also you don't stop your display manager, gdm3, sddm or whatever you might be using.

@sysadmin102 8 месяцев назад

nvidia.run sometimes doesn't actually disable nouveau. I refer to do it manually. I'm already in console mode, what the point of disabling lightdm? What dependencies?

@salvatoresil8083 7 месяцев назад

@@sysadmin102Hi, congratulations on the vodeo, I'm trying both Kali Live and the one installed on the SSD but the mouse arrow and the black screen appear on the desktop, the PC has an Nvidia GPU, can you give me some advice, if I use the live mode by setting safe-mode it works well, I tried changing nouveau to modeset=0 but the problem remains, greetings

@umranideveloper3616 Месяц назад

i have problem in Kali Linux when i successfully install kali Linux on my System after installed done getting free i don't know why kali Linux, parrotos, Linux mint, blackarch all getting freez after install Only Ubuntu not getting freez what is problem there ? i have gaming laptop. $ lspci grep -i nvidia 01:00.0 3D controller: NVIOTA Corporation GM107M [GeForce GTX 960M] (rev a2) 01:00.1 Audio device: NVIDIA Corporation GM107 High Definition Audio Controller [GeForce 940MX] (rev a1)

@ramseyibe2844 Месяц назад

Are you dual booted with windows 11?

@ste1ee Год назад

3:58 after this reboot it doesnt automaticaly go into ctrl+alt+f1 and lounches nouveau anyways. What should I do?

@sysadmin102 Год назад

If it doesn’t, then you weren’t successful disabled nouveau driver.

@ste1ee Год назад

@@sysadmin102 i did everything same as you and checked 5 times did I spell everything right

@sysadmin102 Год назад

@@ste1ee try startx

@sumit7099 Месяц назад

sudo update-initramfs -u while I run this I am facing this type of error... update-initramfs: Generating /boot/initrd.img-6.8.11-amd64 W: Possible missing firmware /lib/firmware/amdgpu/ip_discovery.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/vega10_cap.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/sienna_cichlid_cap.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/navi12_cap.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/psp_14_0_0_ta.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/psp_14_0_0_toc.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/psp_13_0_6_ta.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/psp_13_0_6_sos.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/psp_13_0_10_ta.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/psp_13_0_10_sos.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/aldebaran_cap.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_9_4_3_rlc.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_9_4_3_mec.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_imu.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_imu.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_rlc.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_mec.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_me.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_pfp.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_rlc.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_mec.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_me.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_pfp.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_0_toc.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_0_rlc_1.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/sdma_4_4_2.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/sdma_6_1_0.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/sdma_6_0_3.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/sienna_cichlid_mes1.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/sienna_cichlid_mes.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/navi10_mes.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_mes1.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_5_0_mes_2.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_4_mes_2.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_mes1.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_mes_2.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_3_mes.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_2_mes_2.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_1_mes_2.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/gc_11_0_0_mes_2.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/vcn_4_0_5.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/vcn_4_0_3.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/vpe_6_1_0.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/smu_13_0_10.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/smu_13_0_6.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/smu_14_0_2.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/dcn_3_5_1_dmcub.bin for module amdgpu W: Possible missing firmware /lib/firmware/amdgpu/dcn_3_5_dmcub.bin for module amdgpu please give me this solution...

@olamidedavid-i6p 11 месяцев назад

Works like a charm

@sysadmin102 11 месяцев назад

That’s good cause seems like everybody else was having issues with it.

@Mangox 6 месяцев назад

after the .run it says The NVIDIA driver appears to have been install previously using a different installer (i never did that). So its telling me to use debian packages rather than .run files and it terminates the install. so should i maybe use debian packages?

@sysadmin102 6 месяцев назад

What distro are you using? Ubuntu?

@Mangox 6 месяцев назад

No, Kali linux.@@sysadmin102

@sysadmin102 6 месяцев назад

If it already installed on your system, what are trying to do then?

@Mangox 6 месяцев назад

@@sysadmin102 its weird, it still says I’m using nouveau drivers.

@OleksandrSe 6 месяцев назад

Okay, so I think that I did everything as in video, but after reboot I get hub "my graphics card numbers" config failed, hub doesn't have any ports! (Err -19)

@OleksandrSe 6 месяцев назад

When doing initramfs I get lot's of "possible missing firmware ... For module amd gpu". I have ryzen 7900 integrated and 1660 ti

@OleksandrSe 6 месяцев назад

Okay. I knew that it may help, so I just deleted the text in the blacklist file and it went back to previous state, and the Operating system launched✌️

@OleksandrSe 6 месяцев назад

By the way, I'm new to linux, how do I delete that "blacklist" file from terminal? What would command look like?

@sysadmin102 6 месяцев назад

sudo rm filename.text

@sysadmin102 6 месяцев назад

Glad that you found your own solution!

@juanmanuelmillansanchez8165 10 месяцев назад

HI i'd like to ask if it works for debian 12, i not sure if it will vary that much from kali linux to debuan 12.

@sysadmin102 10 месяцев назад

It’s the same process for all Debian. Kali Linux is based on Debian 12. The only issues is driver compatibility.

@juanmanuelmillansanchez8165 10 месяцев назад

Everything goles we'll until I try to reboot like in the minute 4:42 and Perform the rest of the steps. Apparently reboot is not a command in debian and I ended up using sudo reboot.then reentered the console , However ,when I get to the steps of the minute 4:42 it says "you appear to be running an X server please exit X before installing" do you know what that could be?

@juanmanuelmillansanchez8165 10 месяцев назад

@@sysadmin102 help plz

@sysadmin102 10 месяцев назад

X server meaning you have Nvidia installed before. You need to remove it before attempting to install Nvidia Driver again. Search for Uninstall NVIDIA Driver on my channel.

@Jean-uw4tz 6 месяцев назад

Excuse me, this is possible to use on mint lmde? since its based on debian

@sysadmin102 6 месяцев назад

Maybe. You will have to try. Make sure to create a backup, just in case.

@Jean-uw4tz 6 месяцев назад

@@sysadmin102 alright thank you,i did some adaptations and it worked fine.

@sysadmin102 6 месяцев назад

That’s great!

@Kmax21 8 месяцев назад

Ctrl + alt + f1 not working it suspend the system idk why😢

@sysadmin102 8 месяцев назад

It’s depending on your distribution. Try Ctrl + Alt +( F1 to F6 ) or find out what the default tty for your Linux distro

@dibyendubhowmik7281 7 месяцев назад

Unable to find the kernel source tree 4:34

@sysadmin102 7 месяцев назад

Update the header: sudo apt-get install linux-headers-`uname -r`

@ixyousif1737 12 дней назад

@@sysadmin102 I had same problem and after doing as u said it says Uname-r command not found

@IzzaZone365 11 месяцев назад

Thank you!!!

@drewski2001 11 месяцев назад

Your English accent is pretty good.

@sysadmin102 11 месяцев назад

Are you being sarcastic? 😂 Either way, thanks!

@GamePlay-hc6bb 9 дней назад

Hệ thống báo không tìm thấy nvida..tôi đã cài Kali linux qua VMware..giúp tôi với

@sysadmin102 9 дней назад

Cai VMware thi lam gi ma thay NVIDIA.

@GamePlay-hc6bb 9 дней назад

@@sysadmin102 có cách nào ko bro 😥

@sysadmin102 9 дней назад

@@GamePlay-hc6bb ko.

@dali-tech-2024 9 месяцев назад

Cuda 1060ti ? 11000kb/s 11mpbs

@sysadmin102 9 месяцев назад

What are you talking about?

@rajkumariyadav6197 7 месяцев назад

sh command not found and also cant go to cli mode, it just keep exiting

@sysadmin102 7 месяцев назад

Not sure what you mean by that

@SUPRA16361 4 месяца назад

Why it gives me no such file

@sysadmin102 4 месяца назад

You have to create it your self. The the command in the video should create a file. If not, then check your typo

@SUPRA16361 4 месяца назад

@@sysadmin102 Thank you very much 💙💙

@codingshortz Год назад

i get error when i run sudo sh the nvidia file. it says disable x server?

@sysadmin102 Год назад

Which mean you already has some version of NVIDIA installed on your system already. You have to uninstall the old driver first sudo nvidia-uninstall

@SoundinLikeThunder 7 месяцев назад

When I type lspci | grep -i NVIDIA I get nothing Please help buddy

@sysadmin102 7 месяцев назад

Try vga instead

@SoundinLikeThunder 7 месяцев назад

@@sysadmin102all I get is this 00:0F.0 VGA Compatible controller :VMware SVGA ll Adapter no nvidia or anything

@SoundinLikeThunder 7 месяцев назад

@@sysadmin102 $ lspci -s 00:0f.0 -v 00:0f.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter Flags: bus master, medium devsel, latency 64, IRQ 16 I/O ports at 1070 [size=16] Memory at e8000000 (32-bit, prefetchable) [size=128M] Memory at fe000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: Kernel driver in use: vmwgfx Kernel modules: vmwgfx any idea whats happening here? so confused

@SoundinLikeThunder 7 месяцев назад

@@sysadmin102I have NVIDIA GeForce RTX 3060 that works fine on my windows.

@sysadmin102 7 месяцев назад

@@SoundinLikeThunder are you running this on virtual machine or ESXi?

@اناكندي 10 месяцев назад

مش شغاله علي usb kali live

@sysadmin102 10 месяцев назад

لم يتم إنشاء الفيديو لـ kali Live

@اناكندي 9 месяцев назад

@@sysadmin102 ارجو عمل فديو ❤

@cipobob8061 8 месяцев назад

Great video but I had to disable x server

@sysadmin102 8 месяцев назад

The video was produced on system that didn’t have Nvidia drivers installed before

@cipobob8061 8 месяцев назад

@@sysadmin102 some video about grub repair?! It will be great

@AhmedHeshamAboelnasr Год назад

I get error because live system

@sysadmin102 Год назад

Not sure what “live system” mean

@pranabanandabhanjababu9273 Год назад

Running an OS from bootable USB Such as KALI LINUX live

@sysadmin102 Год назад

@@pranabanandabhanjababu9273 is this persistence USB? You can only do it if it’s persistence

@اناكندي 10 месяцев назад

@@sysadmin102 آيضا انا استعمل live USB kali ولم يعمل

@travislodes5378 5 месяцев назад

Definitely nuked my system…

@sysadmin102 5 месяцев назад

Should be able to fix from console mode

@travislodes5378 5 месяцев назад

@@sysadmin102 I tried to get back to the ttl consol but the keyboard shortcut did not work

@travislodes5378 5 месяцев назад

@@sysadmin102 I also tried the nvidia uninstall and it did not work

@chellenta1175 Год назад

Video visibility is very poor

@sysadmin102 Год назад

Ok. Then you can read my post instead

@hulkgqnissanpatrol6121 Год назад

I'm using an outdated device and can see more than I need to. Maybe buy a decent tablet or watch on a bigger screen... It is 1080 60fps after all.

@OleksandrSe 6 месяцев назад

@@sysadmin102 he was being ironic, nevermind🌝

@travislodes5378 5 месяцев назад

I got my system back to normal, but no nvidia drivers. When I run the update-ramfs -u it gives me errors saying the line options nouveau modeset =0 is an issue

@sysadmin102 5 месяцев назад

Is this for a dedicated GPU?

@travislodes5378 5 месяцев назад

@@sysadmin102 yes, I have a GeForce rtx 2060 super

@travislodes5378 4 месяца назад

@@sysadmin102 any advice?

@sysadmin102 4 месяца назад

Need a few info: 1. Linux Distro: 2. Was you able to install the Nvidia driver package in ttl console? 3. Did you blacklist the nouveau driver?

@sysadmin102 4 месяца назад

check the blacklist-nouveau.conf configuration file in /etc/modprobe.d/. It should look like this: blacklist nouveau options nouveau modeset=0 check the system logs for more details about the error dmesg | grep nouveau journalctl -xe | grep nouveau