If you want to deflate this kayak then: 1. OPEN ALL 3 HY valves and ALL 3 chambers will deflate 90%. Till chambers Are deflating themselvs, you can deflate seats (vith pump) and deasemble paddles. 2. Then the rest 10% of air leftover in chambers deflate using the pump. That’s IT. Very easy and fast
Hi Sandy, thanks for watching! It's a great kayak and I can't wait for warmer weather to get back on the lake. I found the deflate feature by accident and it sure comes in handy. Regards, Joe Hewes
For #2 , get a auytomotive "drying towel" instead of a regular microfiber towel. There's another type of towel called "chamois towel", which is much more compact.
Any tip on how to deflate the flat section of the kayak? The "pump trick" seems to only work on the side sections but the flat section has like a flap on the inlet that stops the pump from sucking the air out unless you squeeze it
It's a bit trickier with the bottom section as it does not have the same type valve as the side compartments. I have found that if I can push the hose nozzle in far enough it will keep the flap open. Hope this helps. Joe.
Is there some little trick to using the 'deflate' feature of that pump? I know you have to switch the hose over to the deflate side, but is there something else as well? So far, I can't get the 'deflate' to work ... ?
Hi. You also need to open the valves on the kayak. Once you have switched the hose over to the deflate side of the pump, and opened the valve on the kayak, start pumping, and it will suck the air out. Let me now if this works for you.
Hi Randy, thanks for watching. The kayak has been stowed in its bag for the winter. I'll post new video in the spring when we take to the water once again. My last paddle was in October on lake George. it works great!
anyone know what the handle "accessory" is that comes with the kayak? it inserts into the valve holes, but doesn't seem to turn.... what is it used for?
That tool removes the valve core, allowing you to deflate much faster. Just be aware that it also leaves a gaping hole for water and debris to enter your kayak.
Sorry for the comments that are about to follow, but I can't help myself: First two "hacks" are not really hacks but an illustration how NOT to be stupid! Drying off your kayak is not a hack anymore then closing your car door after you get out or not wearing your shoes to bed. A micro fiber tower that's the size of beach towel is of no more value then a cheap towel of much smaller proportions. Last tip is not easy or quick! It takes longer and required much more effort then natural deflation. After a long paddle who wants to hand draw all the air out of their kayak? I pop the caps and air deflates quickly. Then I start folding or rolling one end towards the valves which naturally squeezes out the tiny bit of air that is left.
Thanks! I just bought this Kayak. I think it was used once before I got it. But that saved me a bunch of money. I like how you said you discovered the deflate function by accident. Many pumps do that. And whoever reads the instructions anyway, right? Haha.
@@HewesNewsThanks.....well, I probably won't enjoy the kayak until about 6 months from now. I did enjoy inflating it inside my living room. The water gets frozen about 24-36 inches thick around here this time of year!
Thanks for putting this out there! I bought my Kayak used and did not come with instructions. I seem to lose a lot of air in between the inflating completely, then pulling out the pump, and trying to insert the valve cap. Seems a sufficient amount of air still stays in but I feel like there’s a way to keep air in while trying to cap it? Am I doing something wrong? ALSO! Can you post a video on how you fold and store your kayak? Easiest way to get it down to its smallest size
Hi Josh, thanks again for watching. The valve is called a Boston valve and when it's in the proper position it will close right up when you twist and release the hose nozzle. You can download the instruction manual here: intexcorp.com/products/sporting-goods/professional-series-boats/excursion-pro-k2-kayak/
After I deflate, I fold the kayak lengthwise into thirds and then just fold it onto itself the short way. I'll put up a video some time, once we have a warmer day. The key is getting all the air out, as I explained in my video. Once you do that how you fold it is less important. You can fold it in half lengthwise and then in half the short way, in half again, until it's small enough to fit in the bag. Hope this helps, thanks for the suggestion.
After watch your video I examined my pump, it is labeled inflate and deflate. I thank you for pointing this method for deflation out. My excursion pro looks to be a good product for the price point. My only complaint is the instructions that come in the box are not very complete, for sure they should have covered using the pump to deflate.
Hi capowhacko, thanks for watching! The crossbar is to mount accessories, such as GPS systems, fish finders, swivel fishing rod holders, etc. I plan on mounting a handheld GPS unit to track my trips.
I have had a rough time with intex trying to obtain a replacement pump and valve to attach to the kayak. Can you send me a picture of the valve that inserts and twists? Intex has no idea what I am talking about. Apparently, intex uses a proprietary Halkey style valve,and nothing fits it except the past that ships with the boat.
Hi Ronalda, thanks for watching! The bag I have has two straps to carry the bag, that's it. I don't think they are backpack straps as they are really long. I've knotted them to make them shorter to stay on my shoulders. Even so, 40 pounds is a lot to carry.
BRO, you're hilarious! Just the "yak hack" part of this video is worth the price of admission. I love the way you bring your inner child school boy to the table with the 45lb. back pack. That's funny! Great tips. That's the same yak I'm sportin'.
