Keep Your Steering in Check! Every Jeep Owner Needs This Tool!

Подписаться 147 тыс.

Просмотров 26 тыс.

50% 1

Alignment Plates we used: amzn.to/4cmoHQO
Cheaper Alignment Plates: amzn.to/43onpAk
Balance Beads: amzn.to/3Vtt3Q5
Tie Rod Adjuster Tool: amzn.to/4ckyhU9
Crows Feet Wrench Set: amzn.to/494PVbs
You can do you own steering alignment at home with just a few steps!
Past videos covering caster adjustments and adjustable control arm setups:
Caster/Pinion Angle: • How to Check Caster an...
Adjustable Control Arms: • Lift Your Jeep Wrangle...
Whether you are installing new parts, or just like to do regular maintenance, adjusting your alignment can be something you can easily do at home!
Setting toe and recentering the steering wheel on your jeep is an easy process and these alignment plates makes it even easier and can get the result almost spot on.
A proper alignment can be a good spot to check if you are getting a steering shimmy or even Death Wobble, while its not usually the full issue it can be a contributing factor.
Channel Discount Codes:
Full Throttle Battery: JKGG fullriverbatte...
Barnes4WD: JKgear or Jeepgear barnes4wd.com/
HotHead Headliners: GG10
Clayton Offroad: JKGG www.claytonoff...
Advanced Driveline Axles: GEARANDGADGETS or Call advanceddrivel...
www.gocoastgua...
Garage Tools and Equipment:
Electrical Deustch Connector Kit: amzn.to/3thO3Nq
Balljoint Press: amzn.to/3BHmYpj
Digital 1/2" Drive Torque Wrench: amzn.to/3RU4lq2
M18 Impact: amzn.to/3JxDKZS
M18 Cheap Batteries: amzn.to/3BBXuta
Portable Work Platform: amzn.to/3bxD35Y
Crows Foot Wrench Set: amzn.to/3GEQyxb
Torque Wrench: amzn.to/3oQluS0
Allen Socket Kit: amzn.to/3JqpB0k
Crocs: amzn.to/3r7YXS4
Full Torx Bit Set: amzn.to/3rGMxnC
Affordable Plasma Cutter: amzn.to/3H0eBqY
GoPro: amzn.to/3jZ1D0e
Interior Trim Removal Tool Set: amzn.to/3unUdce
Jeep Stuff:
Jeep JK Sunshade: amzn.to/3d2jBi8
LED Headlights: amzn.to/3LOzqHZ
LED Tail lights: amzn.to/3PFtLVK
Soft Shackles: amzn.to/3q0Y3FY
OBD2 Bluetooth Reader for JScan: amzn.to/3R7Tt4B
JK Grab Handles: amzn.to/3RgmTxO
JL/JT Grab Handles: amzn.to/3Rd6aLC
Warn Dana 60 Locking Hubs: amzn.to/3vzSWjs
Warn Zeon 10-S Winch: amzn.to/3AJR9tw
Magnaflow Muffler: amzn.to/3CQgg0O
Jeep JK Remote Start Kit: amzn.to/3XYjC9R
JKU Bedrug Kit: amzn.to/3DhWFFZ
Be sure to subscribe for more Jeep mods, installs, reviews, builds, and offroad trips!

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@SkyBlueOffRoad 6 месяцев назад

I have been missing Cassies channel. TJ/LJ content is dearly missed.

@thomasleonard9685 6 месяцев назад

Yeah - we were wondering….

@thomasleonard9685 6 месяцев назад

She’s better than some of the others on YT. Even the BRITEr ones - she adds to the content

@StlrNtn95 6 месяцев назад

@@thomasleonard9685Wayyyyy better than the BRITEr ones!

@JohnDoe-wy2py 6 месяцев назад

@@StlrNtn95I quit watching the BRITE channel because I have small children. Never have to worry about anything watching Ben’s or Cassie’s channel. I appreciate them being respectful.

@escdefender 6 месяцев назад

@@JohnDoe-wy2py wait you stopped watching light brite because you have small children but you watch Cassie, whose body is outstanding, and is showing off her assets every episode she’s in it with her yoga pants and T-shirts??

@tylerp9620 6 месяцев назад

It is probably time tot do a walk through of the vehicles and the plans. There is a CJ somewhere there, I had forgotten about the LJ.

@StormbornJKU 6 месяцев назад

Need more Cassie content! Maybe now that the race jeep is “done” we’ll see her out there helping and doing stuff more!

@andrewsreviews4748 6 месяцев назад

We just had our JL out on some trails and I was concerned about alignment after doing some rock crawling. Thank you for this video! Love the channel! Love to see you two working together on your shared hobby!

@javas9126 6 месяцев назад

Welcome back Cass!

@jlautomotive6349 6 месяцев назад

I bought my ‘20 Gladiator about 8 months ago… my first Jeep with removable parts, have owned my XJ, WJ and a Patriot but I am in love with my gladiator and wanted to say thank you both! This is the perfect size truck and the most fun truck I’ve ever owned. Thank you for this video, I will be purchasing a set for my Jeep. Keep up the incredible work!!👍

@johnfitzgerald5158 6 месяцев назад

The one tool I added to ensure the metal alignment bars were level is a small digital level that I set on the bar on each side.

@richardpedersen9189 6 месяцев назад

Hey! Glad to see you back doing an "everyday kind of stuff" video, especially Cassie 👍 🥰

@escdefender 6 месяцев назад

Cassie is extremely hot!

@foregonetrails 6 месяцев назад

I recently used these after replacing some steering components on a TJ. Had the worlds worse death wobble before and completely gone after. Great tool to have around the garage.

@tlpoutdoorsman 6 месяцев назад

Fantastic vid.... and the shop girl 💰

@jeffcombs8237 6 месяцев назад

Great basic mathematics on steering. I really enjoyed this. You can do more and save more. Thanks

@Petesmotoadventure 6 месяцев назад

Great tips, I bought a lifetime alignment from one of the tire shop. Brought it twice the poor kid has no clue about solid axle 😂. After my lift ,e and my buddy got it close than the shop. Got to buy a set of those guides. Thanks.

@ExfilOffRoad 6 месяцев назад

Outstanding 🎉

@XalvaroramosX Месяц назад

Great video

@ozguy1393 6 месяцев назад

I made a set of these 15 years ago out of angle iron. No need to spend the cost these cost.

@porkrindrob 6 месяцев назад

Nice video and great training!

@lorenzoramirez6163 6 месяцев назад

Good to see another video! I recently worked on fixing a torn boot from one of my outer tie rod. My steering wheel was always to the right, but i finally got arouse to fixing it and now its practically straight! It was also causing my bas/esp light to come on and stay on, and since the fix it hasn't returned! Thanks for the helpful info!

@MikeBrady-ug1hu 6 месяцев назад

Awesome video!!! Good simple straightforward Thanks!

@chrislorenz4468 6 месяцев назад

In my amazon cart 👍

@kevinmcelheran4489 Месяц назад

Great video! Good to see content from you! One question I have about the ball joint delete video you did 2-3 years ago, do you still recommend them ?

@PaulKaiser42 6 месяцев назад

Thank you so much that is very helpful!! 👍🏻

@jrmotorsports5532 6 месяцев назад

Great video. Items that are easily DIY if you have the tools and info.

@davidcolinstillman5585 6 месяцев назад

THANK YOU ☺️ 🙏

@White.Elemant 6 месяцев назад

Bro you lost weight! Not that it's related to the content but still 💪💪💪

@rickmarquart3277 6 месяцев назад

I was fired up, for Cassie, Drag Racing. 😩

@blanksender7808 6 месяцев назад

Toe in vs. toe out is dependent on whether it's a front wheel drive vs. a rear wheel drive. the school of thought is that a front wheel drive pulls (as a side effect of the torque being on the front wheels) the leading edge of the tires slightly inward at speed, and a rear wheel splays them (the leading edge) apart at speed. So, toe out for a FWD, toe in for RWD. That's my understanding anyways.

@wk7060 6 месяцев назад

Good wife helper!

@buddyeast1928 6 месяцев назад

Two tapes, set them both on the toe bracket and it is easy to read.

@shawnshawn4991 6 месяцев назад

Never use two tapes. 1 could not measure the same as the other.

@buddyeast1928 6 месяцев назад

Easy. check them against each other first. Much easier having two tapes sitting on the toe bracket. I have two identical tapes and they meaure the same. But, to each their own. Eat your own dogfood.@@shawnshawn4991

@corbind.9395 6 месяцев назад

Meanwhile I'm over here procrastinating changing my spark plugs, coil packs, and throwing on some front spring isolators...

@jorgevizcarra4437 6 месяцев назад

I love the race jeep and all but we need to see you guys build that silver TJ for sure

@samperea8348 6 месяцев назад

Will there be any KOH coverage?

@richardgoetz8417 6 месяцев назад

what kinda beads did you use. did it fix the problem

@CrewdogF15 6 месяцев назад

What brand are those rims on your gladiator

@JKGearandGadgets 6 месяцев назад

Mickey Thompson Classics that we painted grey

@Tunaslayer1 6 месяцев назад

OK, dumb question... Your tires had significant wear. Are they daily drivers, or trailered? And, would you set up each with the same 1/16"??

@JKGearandGadgets 6 месяцев назад

These 2 Jeeps see the most road use for sure. I like to set the larger tires with “more toe, meaning a 35” and smaller I like to set at 1/16” in, and 37s and larger I set around 1/8”.

@REDMAN298 6 месяцев назад

There is no way that stock tie rod is going to "jump threads".

@JKGearandGadgets 6 месяцев назад

Happens on jks at the drag link, on a TJ tie rod it would probably bend the actual tie rod first lol.

@backeroni 6 месяцев назад

@@JKGearandGadgetstrue. I had an instance where I made a u turn at some speed and my passenger tire hit a foot and a half curb pretty hard. Only thing wrong was my drag link had jumped a few threads (no apparent damage to the threads tho). Steering wheel back straight now no issues after realigning

@stanleyfurash7929 6 месяцев назад

So with all the jeeps you have and bashing you do are you buying an alignment machine

@MP-dg8ew 6 месяцев назад

Damn… lost some weight 👍🏻

@electrake2063 6 месяцев назад

@11:55 - I'm gonna throw the BS flag on that statement about 'skipping a thread' on the stock steering, that CAN'T happen if that clamp was tight, sorry. That linkage would totally buckle LONG before you could 'skip a thread'. Moving past that load of crap statement... For those of you with a calculator, and remember basic geometry, you can calculate the TOTAL toe value if you know the front measurement (Xf), and the rear measurement (Xr), and the distance BETWEEN the measurements (L= about the length of the bar you attached to the rotors). TOTAL TOE = tan-1((Xr-Xf)/L). This will give you TOTAL TOE in degrees, and remember "tan-1" is the INVERSE-tangent of the (Xr-Xf)/L value. For this example, if the bar is 24" long, and the difference was +0.25", we get a total toe of tan-1(0.0104) = +0.6 degrees, so +1/8" should give us about +0.3 degrees (again, assuming the bars were 24" long - if they are shorter the numbers get WORSE, so I still think +0.125" total toe MAY still be too much personally). If you get a negative number, then you have TOE OUT (front measurement would be LONGER than the rear measurement)

@JKGearandGadgets 6 месяцев назад

On a TJ steering you are correct, the tie rod would buckle or bend before it skipped a thread, but it is very common on JKs and JL/JTs.

@Adventure_4x4 6 месяцев назад

While that’s a great easy way to correct toe, your tape measure isn’t going to replace my $50,000 alignment machine.

@Jeep79 6 месяцев назад

Bro i follow you for years i respect you work ask coddywaple what i junk piace a 💩 is that sistem i why i swap to steer smarts and we go from there

@bdd1469 6 месяцев назад

I really wish people would stop calling setting the toe " an alignment." This causes millions of people to set their toe and then spend millions of dollars replacing parts when their junk still doesn't drive properly because they haven't addressed castor, camber, steer ahead, thrust angle, pinion angle, etc. Not to mention, " alignment plates " are a joke and completely unnecessary. Most are made in china out of garbage material, thrown in a bin, and shipped thousands of miles. How straight do you think they are by the time you receive them? I'll give you a hint. The two sets I've laid hands on because foolish friends thought they were a much needed cool tool, are now residing in the scrap pile, or have been cut up for other projects. If you just replaced a steering piece and need to quickly set the tow without caring what the rest of your alignment looks like it is simple and you dont need these stupid plates to do it, or need to jack up the vehicle and remove tires. Pick any spot on your tire just below your rear lower control arm or leaf spring, and put a dot on it with a paint marker. Measure from the floor to the dot, and put a dot on the opposite tire at the same height. Measure between the dots. Roll the Jeep forward until the dots are at the same height as they were before. Measure the distance between them, and set your toe accordingly. Roll the Jeep back and recheck your measurements. Simple, easy, accurate, and no jacks plates or tools needed. One last thing. While history and common practice tell us toe is best set around 1/16 -1/8 in....My personal experience as an auto tech who specializes in steering and suspension have shown that on many heavily modified vehicles like lifted Jeeps where the scrub radius and effective castor angle are not even close to stock, being towed OUT a 16th can give you a much better driving rig, with no added tire scrub or wear.

@manny1584 6 месяцев назад

Did the balance beads work ?

@JKGearandGadgets 6 месяцев назад

Yep. I’d still recommend traditional balance on new tires, but usually halfway through life of mud terrains it almost works out better with the balance beads.