To reset the mode just follow these few steps:
1. Power off the M525 doorbell receiver first. That is, unplug the doorbell receiver from the outlet.
2. Press the "Music +" and "Volume" keys on the doorbell receiver at the same time, and then plug in the power. (At this time, the LED light of the doorbell receiver will flash, and the bell will ring after 10 seconds, that is, the doorbell is reset successfully)
Now you need to think about which mode you want to configure the transmitter button to:
Normal pairing mode:
Press the "Music+" and "Volume" keys on the doorbell receiver. The LED light on the receiver lights up, press the transmitter button again, the LED flashes once to indicate that the pairing is successful. Press the "Volume" key on the receiver to exit pairing mode.
Emergency mode:
Press the "Volume" and "Music-" buttons on the doorbell receiver at the same time, the LED light on the receiver lights up, and then press the transmitter button, the LED flashes once to indicate that the pairing is successful. Press the "Volume" key on the receiver to exit pairing mode. At this time, press the doorbell button, the wireless doorbell receiver will play "WUWUWWU".
Silent Mode:
Simultaneously press "Music+" and "Music-" on the doorbell receiver, the LED light on the receiver lights up, press the transmitter button. The LED blinks once to indicate successful pairing. Press the "Volume" key on the receiver to exit pairing mode. Press the waterproof doorbell button, the wireless doorbell receiver will not ring, only the indicator light will flash.
Amazon Purchase link:
UK: amz.fun/Dl/M525UK
DE: amz.fun/Dl/M525DE
FR:amz.fun/Dl/M525FR
ES: amz.fun/Dl/M525ES
IT: amz.fun/Dl/M525IT
Any questions please contact:
Facebook: www.facebook.c...
Email: pq13288768482@Gmail.com
8 сен 2024