Key Stuck In Lock - Won't Come Out ** Solved - Locksmith Parramatta 

Got home from a day at the hospital for a loved one only to have this issue at 11pm. Other videos just tried to sell stuff, this one explained everything so well. Saved my sanity!!

Staff called me at midnight key stuck in the door, had to drive down Saw your video Mate you are a bloody legend Pulled the key out in one second I look like a superman

I owe you a great deal of thanks! I was struggling with my lock for close to 30 minutes before I looked it up! 2 seconds and done!

Oh thank God your a life saver u got stuck at my door for ages before I found this video. THANK YOU SO MUCH

Legend thankyou just saved standing out in the rain longer than I would have been!. Not all heroes wear capes.

Thanks so much for this video. I was just about to smash my door when I told myself “let’s just ask google for a fix” and lo and behold! Your video came out and fixed my problem. Can’t thank you enough!

😘 I LOVE YOU! This just saved me and my 2 year old and 7 month old twins having to sleep with the front door unlocked

Thank you . Extremely well explained. My problem solved in minutes after viewing your video. i wish I'd gone to you tube first instead of wasting about 10 minutes jiggling the stuck key -at night -out side in below zero temperatures. we are in the bush and a long way from any Locksmiths so THANK YOU again

Thanks for the clear video!

Mate you’re a legend , literally this video saved me from a melt down !

Happened to me, started to sweat, found your video, crisis averted. Cheers mate.

Thank you so much for the video. Had been told that I needed a new lock when all I needed was to tighten the screws...

Thanks for taking the time to show this.

THANK YOU SO MUCH THIS WAS A LIFESAVER

Worked perfectly, thanks for the help

OMG We spend hours trying to get our key out. then I used your tip and it worked. Thank youuuuu!

Life saving vid. Thank you for uploading!

Great video, tried it out and it worked. Thank you.

Thank you so much! This saved us today

Thank you for making this video!

Thank you. It worked! 👍🏼

Saved me 4 hours waiting on a locksmith, thank you!!!

Thankyou so much for this video

My hero!!!! Thank you!!

omg you saved my life, thank you

Thank you so much for making this video. The key was stuck in for a long time. Thanks again.

This just saved me Thank you

This saved me from having to reorganize my entire morning. Thank you for making this video.

Hi Dr.Lock! how's your day? i just want to thank u for helping me. My key was jammed. Im so thankful.

You are awesome, saved my 100$ ❤

You are awesome! Thank you! My key is now free 🙂

Thank you....worked perfectly.

Thanks champion you safe me time and money

WORKED.. I Really appreciate it

Thanks a lot!!!

LEGEND!!!!!

THANK YOU

Thank you! Saved me from going nuts 😜👍🏼

Thank you !

yea just work thanks alot!

Thanks alot sir

If you look carefully at the end of this video, it looks like Dr. Lock actually has a bit of trouble pulling out the key after he tightened the pair of screws at the back of the cylinder. He said the two screws need to be tightened very tight. But you might not want them so tight, because the plug (a.k.a. core) might need to portrude slightly forward (around 1/32 inch) in order for the plug's pins to align well with the holes above them when pulling out the key. If that's the case, replacing the two screws with screws that are a slightly different length, or inserting very thin shim washers between the screws and the cylinder back, might allow you to fully tighten the screws and have the plug end up in the optimal, slightly portruding position. An important step that's missing from this video is how to remove the cylinder from the lock in order to access the two loose screws on its backside. It would help to include a link to a video that shows how to remove the cylinder.

Thank you so much it worked

Thank you

Thank you it worked

thanks dr lock

I was about to say this didn’t work for me but then I turned my key 180 degrees and it slid out easy peasy

Thank you so much, I was about to break my entire door down.

Thanks it worked 3🙂

Thanks Dr Lock done a d fixed

My key are stucked but i cant put it back to 12’olock direction, any help? Thanks been locked out for an hour figuring it out

I have a similar lock and the flange at the back has come loose so cant open the pins in the door in to thw wall... can i drill it trough to take the whole thing out and replace it? Plus i have no access to the other side of the door . Thanks.

THANK YOU SO MUCH.

IT WORKS! Most helpful video I have found on getting key out of lock. Straight & to the point. Thank you.

had similar problem but was a key that was left there for years, pulling it out wasent possible locktight dint work. could not enter far enought. had to remove the cylinder and oil it back and front, spin key around a few times now its out.

I have an Ultion lock that can be a bit of a nightmare for removing the key when unlocking and locking the door. it makes me really anxious every time I put the key in the door. The key has to be exactly in the 12 o clock position but even then I'm having to wriggle it a little bit to remove the key

Thank you so much for the video i almost buy a holl new door

I’m trying this at this very same moment and I still can’t get it out

Thanks I hope you solved my bike issue. Will check tomorrow.

Hi Dr Lock, thanks for the nice vids. I undid those screws and then it jammed up on me. anyway to rectify that problem? one of the guide pins can pop out, as the keys come out that far... but that's it. :(

Hi! thank you for this. could you also help with a cylinder lock.. where in order to get key out once you lock the door... is to go back to the unlock position ONLY .. which renders the door unlocked too... LOL ... yip. thank you!

hehe.. its worked... thanks man

What if it won't go perpendicular? Pushing on the center doesn't help. Now, this is a car lock that is not secured to the door (I'm changing the handle), but even if I hold the cylinder with my hand from the inside, I can't get the key to get all the way straight up-and-down (only a degree or two shy of it). So I presume that's why it won't come out.

I install the padlock and I cannot take the key out when I lock it

Hi, great video but my lock barrel in the cylinder won’t pop back in to the cylinder so I can’t get back to 12 o’clock? Any ideas?

Nope crap!! Thanks 🙏

legend! works

So I was just not think right today lol. Trying to take the key out as soon as I unlock it and not turning it back

My key won’t go into a twelve o’clock position it just stays in a three o clock

I failed on step 1, my key won’t turn to the position where it can be removed 🥺

My key is stuck but won't turn and get aligned to the 12 o'clock position. Any suggestions?

Omg my circle and key are stuck any solution?

I have sliding doors and I added an upper lock door jam and the key is stuck inside and it won’t move at all it’s stuck in left to right not in 12 o’clock position how to I get key out?

Mine is stuck in the horizontal position, won't budge the other way

Mine is still not coming out, what do i do? The little circle won't budge please help

In my case, there are no screws to re-tighten. But no big deal. The key was pulling the inner cylinder outward, and that caused the lockup. Thus the key was at war with the inner cylinder. To resolve this problem, one must stop the key from grabbing on to the inner cylinder. So I took a lead pencil and put plenty of graphite on the key, and then inserted and removed the key several times. I repeated this graphite application to the key twice, along with the multiple reinsertions of the key. Bingo, the graphite now acts as a slippery lubricant, and so the key no longer grabs the inner cylinder and thus no longer pulls it outward. Now the key just flies out with ease.

What to do when it doesn't get to the 12 o'clock position?

What if I can't rotate it?

I cant open the door because im stucked in,they key has stucked in the locker,what should I do?

I put wrong key in lock and it wont go out, what should l do?

My wife has put the wrong key in the garage lock and now it's stuck and won't come out. Any ideas?

Fucking masterful!!! I was about to rip this door off!!!

What if it's jammed at 2 o'clock

What if the cylinder doesn’t turn and it’s stuck at a 11-10’o-clock position?

What if the key doesn't turn into the 12 o clock position?

Halp, mine is small and rusty and it wont press 😭 it would rotate to 2pm when i press it

How can i do that on a car door🙈🙈

my problem is I went to unlock and it stopped at 11 o'clock and then 9 o'clock position only and now the key is stuck.

Still not opening.. the key is in a 9.0clock position by default

Hopefully that's the problem with my old Land Rover style key which is stuck in the lock.

Mine is not turning to 12'o clock position

what if I can't turn the key to the 12 o clock position?

im stuck my key 12 oclock at safe box

What if it can’t go back to the 12 o’clock position

it won’t even rotate just stuck and never getting out

How to unstuck it when it stuck in 10oclock position

I've tried this but the key won't come out ..help😩

mine is still stuck

Key will not go back to 12 o clock it's stuck at 2

In my case I had to turn it to 3o clock