I'm proud of this being my first machining channel that I subscribed to when I first started watching it on RU-vid months ago and I bought myself a full set of gear lathe Mill tooling subscribed to tons of different channels but this one was my first and I can tell it's going places
Looking forward to the finished product. As a tool & die maker I'd just like to suggest slowing down the speed and increasing the feed when reaming. Speeds and feeds for reaming are very different from drilling. Thanks for the videos.
Thank you very much for your comment and hint on reaming. It felt like it needed a lot of force to press the reamer in so I did it very slowly. But obviously that wasn't the right way :)
I think you should do the bearing swap in the headstock. I did mine and it really was a night and day difference. Congrats on the new machine, that was very generous. Look forward to more content, Cheers
Thanks for your comment and your suggestion. To change the headstock bearings is definitely on my list to do in the future. I have some ideas what to change also when putting out the lathe spindle and disassembling the headstock.
Dang, that is more than 3 signs of you being in Germany in this video… Your channel kept on popping up when I was binge watching TOT for the 23rd time, so I thought I gave it a chance. Wasn’t disappointed. So, all in all: Glückwunsch zum Kanal und natürlich zur Berg&Schmid! Großartiges kleines Maschinchen ☺️ Grüße aus Berlin 🙋
my brother I don't know where all that intelligence of yours comes from, I can only tell you that I'm addicted to your videos on your channel, a hail to you here from a Brazilian who admires you and your works a lot🇧🇷🇧🇷🇧🇷
Oh I keep forgetting to suggest that you should get yourself a quick change tool post (a high end one, not the super cheap ones). Plus lots of tool holders. I went mad and bought 20, yes 20! Now every lathe cutting tool I own has a holder (plus 4 spare ones for future tools). No shimming or adjustments needed once set up 👍
@@WeCanDoThatBetter You're very welcome, people enjoy your work. Would you like a free forum account (usually $39/year)? Then you can post your videos on our forum whenever you like, and get more subscribers. We have lots of YTers on board; looks like you're one of us.
Kleine Tipps fürs Reiben: -Viel mehr KSS am besten sogar beim Reiben noch mehr damit die Spähne herausgewaschen werden. - Mehr Vorschub, sonst wird die Reibung zu groß. -Nie in der Bohrung ausschalten und herausziehen, sondern doppelt so schnell wie du hereingefahren bist wieder herausfahren -Schnittdaten sind beim Reiben auch sehr wichtig.
Vielen Dank für die Tips! Da hab ich ja einiges nicht beachtet :) Das werd ich beim nächsten Mal berücksichtigen. Hab schon etwas doof geschaut, als die Bohrung plötzlich 2/10 größer rauskam :/
@@WeCanDoThatBetter ich kann noch hinzufügen das zur verhinderung vom schneidenaufbau bei alu ethanol als kss benutzt werden kann. Ausschließlich bei alu. Und ja, bei alu schmiert auch ethanol. Krigste billig beim Action. Zudem wird messing grundsätzlich trocken bearbeitet ,auch gerieben.
@@WeCanDoThatBetter Da habe ich schon öfters meine Probleme gehabt. Ich habe es sogar z.B. mal geschafft, per Hand ein Sechseck zu Reiben 😅. Das wichtigste sind wirklich die Schnittdatenund. Vf kann man etwas variieren aber der VC muss für den Werkstoff passen.
I’m well impressed with what you produce on your lathe. Sure, a milling machine would probably be easier, but only having one tool makes you think about minimising setups, so it’s probably good practice!
Dankeschön :) Ja, man kann schon gut damit arbeiten. Die Halterung des Fräskopfes scheint mir der schwächste Punkt zu sein. Da werd ich vllt mal nachbessern müssen.
Your channel is wonderful and distinctive .. so I hope to activate the Arabic language for translation. I am a good follower of the channel and I learn a lot from you. Thank you and I always wait for your new
Das mit der Drehmaschine als Fräsumbau ist eine sehr coole Idee :) Das könnte ich auch mal versuchen, umzusetzen aber die Materialpreise sind so hoch, da kommt man in der Ausbildung dann nicht hinterher. Schade eigentlich. Bisschen neidisch auf die Proxxon, ich will auch eine Fräsmaschine haben :D
:) Ja, dieser kleine Frässupport ist praktisch, wenn man keine andere Möglichkeit zum fräsen hat. Allerdings ist das Teil etwas lieblos gemacht und nicht super stabil. Besser als garnichts, ist es auf jeden Fall :) Und die Fräse war einfach ein glücklicher Zufall und unglaubliches Geschenk :)
I do look forward to seeing this come togther; I could certainly use one myself. If I may ask, what happened with that oversize bore? Was the reamer a bigger size than the shaft?
Thanks for your comment! I don't know it exactly. The reamer was for a 18mm h7 hole. That means, it should produce a very tight tolerance hole. But obviously something in the process went wrong. Perhaps the tailstock with the reamer wasn't aligned properly or I hadn't the right speeds and feeds for cutting. Perhaps using oil for lubricaton wasn't right. I don't know it really ...:)
Alter Schwede, wie hast du denn das geschafft mit der Reibahle? War das ne H14? Mit einer H7 oder 8 schaffst du das nicht.....da kriegst du Nennmaß plus 12µ im schlimmsten Fall. 200µ mehr ist schon heftig.
For the love of Christ compels us, because we judge thus: that if One died for all, then all died; 15 and He died for all, that those who live should live no longer for themselves, but for Him who died for them and rose again. 16 Therefore, from now on, we regard no one according to the flesh. Even though we have known Christ according to the flesh, yet now we know Him thus no longer. 17 Therefore, if anyone is in Christ, he is a new creation; old things have passed away; behold, all things have become new. 18 Now all things are of God, who has reconciled us to Himself through Jesus Christ, and has given us the ministry of reconciliation, 19 that is, that God was in Christ reconciling the world to Himself, not imputing their trespasses to them, and has committed to us the word of reconciliation. 20 Now then, we are ambassadors for Christ, as though God were pleading through us: we implore you on Christ’s behalf, be reconciled to God. 21 For He made Him who knew no sin to be sin for us, that we might become the righteousness of God in Him. 2 Corinthians 5:14-21
