श्रीमान हिंदुस्तान में हिंदी भाषी लोगों की संख्या ज्यादा और अंग्रेजी समझने वालों की संख्या बहुत कम है तो कृपया मातृभाषा हिंदी में अपना वीडियो बनाने का कष्ट करें
Good Explanation with Practical 👌 Please answer 🙂👇 1) How log time it can be use at one time? (Hour's)🌡️🔥 2) Can it make Noise?😖 3) This pump is fully inside in the water; it's totaly Risk-free? 😊
1) I can't tell your how long you can run the pump continuously. Buy, sometimes i have used this pump for 7 days non stop. 2) it only make noise when it is outside water otherwise it is very quiet when completely inside water. 3) Everything around us has some hazard attached with it. So, as long as the wires on the pump are in good condition(not broken or no visible metal) there is hardly any risk.
I am using this pump when adding new water to my fish tank once a week and the rest of the time I keep it in a bucket without any water. Is it okay to keep the pump like this and not worry about rust? Or do I need to keep in submersed all the time?
All aquarium filters, heaters and underwater lights have electrical wires going inside water. Just make sure the bare wire does not come in contact with water. Once under water it does not make much noise.
Hi ! First off thankyou for your clear videos . Can you post a link to a solar panel and battery I can connect this to in order to use for a small garden fountain .
Oh ok... thank you for the reply . I watched both your videos ( the pump and solar panel video - unfortunately the link you provided from banggood is not delivering )- can you please provide links to a solar panel and pump available on amazon that I could use to build a small garden fountain)
Another informative video. Thanks. Planning on buying. Could you please let me know if this product is still functioning after a year. And is there an AC to DC convertor, by which it can be powered by a car battery. Thanks
you can use layers of heat shrink tubing. if the heat shrink makes good connection with wire then it should be water proof. Still test you setup for surety.
On this particular pump there is no input part where a pipe can be connected but there are several submersible pumps available that comes with a inlet as well. However, submersible pumps are meant to be used while submerged as that is how they are cooled passively.
no, Air stone will only work with air pump. This pump cannot be modified to work as a air pump because an air pump has a diaphragm and check valves which are not present in this pump.
@@ChittoorRahimRoshan I can't explain that in the comment section. I will make a video in future, explaining how water filtration works. But for now i can tell you that, you just put the pump in your pond, the pump will pump water into a container full of filtration media(sponge, High surface area objects,Activated carbon) then the water from the container will flow back into the pond.
@@gurribuy Ok now I understand.. I have been dabbling with Sobo filter to do water changes in my tank and was wondering how to do a top filter that cycles water through different media. Please make a video that will help me for sure. You are doing a great job!
@DIPTA DAS There is no difference in aquarium pumps and cooler pumps so, you can use them 24x7 continuously. Rest is your luck. yes, you can use it as a return pump but remember this pump can pump water to a height of 1.5 meters. IF your main tank is sitting higher than that then look for some other more powerful pump.
you can use a water valve on the input of the pump but not on the output, Because a valve on the output will put back pressure on the pump which can damage the pump in the long run. Because these are submersible pump there is no input for the pump. To solve this problem. simply attach two pipe to the output of your pump, put one of the pipe back into the tank and attach a water valve to the other output pipe. This pipe water flow can be controlled without damaging the pump because the extra pressure is relieved by the extra pipe that we attached to the output(which goes back into the tank)
jasbir bhai maine channel english improve karne ke liye hi banaya tha to isiliye sab english me dalta hu aur mere channel ka waise bhi koi sir pair nahi hai. idhar udhar ke video hai mere channel pe. ye mere dost ka channel hai is par sab hindi me milega ru-vid.com/show-UCcchpW_tC-t88DckWfxtaqA
@@gurribuy I am confused actually as Some people are using power head /submersible pump inside aquarium to pump water to the cannister and some tutorials show the pump is kept inside the cannister which works via siphon! Don't know which one is more effective
@@aniruddh-chakravorty Both ways will work, but pump inside the tank is a little easier. However, if you decide to put the pump in canister then it will be difficult to seal the canister because of the wire that powers the pump also if the siphon breaks, you have to manually start the siphon But if the pump is in the tank you don't have to worry about siphoning and the power cable of the pump.