KIA OPTIMA SERPENTINE BELT REPLACEMENT REMOVAL INSTALLATION

Подписаться 330 тыс.

Просмотров 151 тыс.

50% 1

KIA OPTIMA SERPENTINE BELT REPLACEMENT REMOVAL INSTALLATION
If you have Kia Optima and you need to replace the serpentine belt or you need the serpentine belt diagram on Kia Optima with 2.4 GDI engine in this video we will explain how to do that. We demonstrated how to replace serpentine belt on 2013 Kia Optima but the video may be helpful on:
2011 Kia Optima Serpentine Belt Replacement Removal
2012 Kia Optima Serpentine Belt Replacement Removal
2013 Kia Optima Serpentine Belt Replacement Removal
2014 Kia Optima Serpentine Belt Replacement Removal
2015 Kia Optima Serpentine Belt Replacement Removal
2016 Kia Optima Serpentine Belt Replacement Removal
►► Which Battery Terminal To Remove First: • Which battery terminal...
► Belt Kit with Pulleys (check fitment): amzn.to/3sBoAsx
► Screwdriver Set: amzn.to/3thZkZP
► Mechanic Tool Set: amzn.to/2Kq4EJ0
► Scanner That We Use: amzn.to/30f3HbC
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► 2ND Car Channel: goo.gl/EBCNtc
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300
amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch
amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser
amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable
amzn.to/2jjg9Bd
•Computer for editting
Lenovo ideapad 310
amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405
amzn.to/2jk8nqB
•GoPro HERO5 Black
amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510
amzn.to/2ktOuB7
►Social Media
Instagram: / worldmechanics
FACEBOOK PAGE: / worldmechanicsofficial...
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
World Mechanics is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, World Mechanics, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not World Mechanics.

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@WorldMechanics 2 года назад

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ru-vid.com/show-UCJ9xpq0qUZevSEdBSFqO2ow

@rogereverett9892 2 года назад

So step one… remove engine Step two. replace belt easily Step three… reinstall engine 🙄

@davidweber6213 2 года назад

Do a video with the motor in it

@gh5387 5 месяцев назад

He doesn't know how. If he did he would've made a video for it.

@goldwolf0606 3 года назад

1:10 start point. If you guys are working with the engine in the car, there is very little working space. You have to use a normal 17mm wrench, not that weird looking one they use in the video. That one, Getting if off is difficult but possible, however, it doesn’t allow you to turn the tensioner enough to easily put on the belt due to the motor mount blocking, which is not shown in the video. It’s also easiest to release the belt from the idler and put it back on at the water pump- especially if you are working by yourself. It’s too cramped at the idler and **** the belt is quite wriggly. Make sure you take a drawing of the belt diagram because it’s not easy to memorize the proper placement of the belt.

@hterstiwit 3 года назад

What size wrench do you need to remove the idler pulley?

@roberthutson2023 2 года назад

So basically just remove the engine first then replace the belt lmfao sounds like it would be easier lmfao

@pdaddy879 2 года назад

I just support the engine and take the mount off and jack till the tensioner is clear of the side wall. it's a breeze that way, takes all of 7-10min

@charlescarter1605 2 года назад

We need videos of the motor in the car it’s not that easy

@jebm2767 9 месяцев назад

So first off if you have a 2013 kia optima sxl it's a 17mm rench make sure you have a cheater pipe or extra rench to help pull that rench. Tip if your doing this alone pull the adjustment into place tie it up then crawl under and pull the belt around the compressor easiest way. This video made me so mad.

@jonathanorozco7286 10 дней назад

Thank you, very helpful 🙌

@UltimatumAutomotive 2 года назад

Save the power steering pulley for last you can pull up on the wrench with your right arm when in the car and you can put the belt on with your left. Hope this helps.

@justintime3764 4 месяца назад

That's was so helpful

@donjon9882 3 месяца назад

For everyone talking about the engine issues. taking the tire off is extra work, but I can save you a ton of time when trying to put the belt back on.

@alanculbert5146 Год назад

As if it's going to be that easy......! You just know that it's gonna be a nightmare!

@innovativeintelligence4172 3 года назад

This helps you route it but this belt is so hard to replace

@learsisalotiv1625 4 месяца назад

Obviously comment section is not mechanically inclined. U cant really record yourself replacing the belt with the engine in the vehicle bcuz theres hardly any clearance even for ur hands. If u r a lil mechanically inclined i recommend doing what i did n that was to remove the motor mount to have more leverage in lining everything up properly and easily

@CS-ui4qj 2 года назад

Great video. I have a question for anybody who can answer. That tensioner pulley on my 2013 kia optima has like a metal rectangle piece in the back top of it and it is resting on top of the metal body of engine and making a ticking noise from idling vibration. Is that sign of belt being too loose and needing replace or is there some way to adjust that tensioner so that it wont vibrate and make ticking noise from metal hitting metal. Only does it when idling, not when driving. Thanks in advance.

@razorfett147 2 года назад

The 6 million dollar question is...how do you get the belt into or out of the tensioner pully housing???

@user-kt3qm1hu9z Год назад

Thanks for nun

@matthewwiggins8202 8 месяцев назад

Easy when the engine is out of the car

@pradosal8185 2 года назад

He just wants people to know what’s happening and what exactly your gonna do but to do it you should watch another video… aside from that, the auto parts store told me to change tensioner, pulleys and water pump with the belt, any thoughts on this ?