No video :(

KIA STINGER - CARBON FIBER Cover / Heat Shields for Injen Intakes! ADD W1

Подписаться 14 тыс.

Просмотров 6 тыс.

50% 1

#AddW1 #KiaStinger #install
Stick around to see if our laser thermometer can show a reduction of heat blocking with these carbon fiber shields by Add W1. Carbon fiber has great tensile strength and even better heat conductivity compared to aluminum.
TIME STAMPS
00:00
00:50 - Intro to product
03:00 - Install Start (Drivers Side)
04:42 - IMPORTANT Install tip
07:06 - Install (passenger side)
09:25 - Channel Updates
10:41 - DO THEY BLOCK HEAT? Laser Thermometer Test
Air Filter Carbon Fiber Heat shield Cover for INJEN Intake (SP1350WR / SP1350WB)
Installed an Carbon Fiber Heat shield Cover for INJEN Intake from ADD W1 Specific to the 2018-up Kia Stinger / Genesis G70 3.3T V6-3.3L Twin Turbo
This Heat shield Cover works for Injen SP Short Ram Cold Air Intake System SP1350WR / SP1350WB
for Direct bolt on. Come with : 2pcs Carbon Fiber Heat shield Cover
Prevent HOT AIR from Engine , REAL Carbon Fiber Heat shield light-weight Carbon Fiber Heat shield,
designed to increase cold airflow into the intake with lower intake temperature.
Fit: 2018-up Kia Stinger / Genesis G70 3.3T V6-3.3L Twin Turbo
Available For : AEM Cold Air Intake System (21-849DS) & K&N AIR INTAKE & INJEN Air Intake
For more information links below !
ADD W1 Air Filter Carbon Fiber Heat shield Cover
www.addw1.com/...
Other stinger products
www.addw1.com/...
ADD W1™ Official Site
www.addw1.com/
DONT MISS THE GIVEAWAS ON MY CHANNEL - Please go check out my other videos and subscribe for future content and giveaway alerts. As always, thank you for the support.
NEW MERCH - OFFWHITE STYLE MERCH LINK - will be adding even more soon! - twn2rbo.creato...

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@conwayleaf9021 2 года назад

Yea idk why they didnt make the hood vents functional with how much heat this engine generates lol

@shaunsstinginggts4850 2 года назад

I've had these on my GTS for about 8 months now. They work great & look awesome🔥. I also have the Injen hydroshield covers for the filters. Adds a little extra flare & helps keep the filters clean & pulling in clean air. Thanks for the video and the numbers on the heat. I've been wondering exactly how much heat they block. Have a good day bro.

@twn2rbo 2 года назад

You too! Thanks bro 😎

@shaunsstinginggts4850 2 года назад

🤙

@user-zq9jz6od2q 2 года назад

Thanks for this! I had to go back and adjust mine to block off more from the bottom!

@mikew6945 2 года назад

I have Injen's on my Stinger as well but ended up doing a DIY heat shield with heat reflective material and tape tied around the strut bars. Gives me a lot more coverage than the CF shields and was obviously way cheaper. Did it as an impomptu hold-me-over but its been on there for 6 months now without an issue!

@cmack5384 2 года назад

Good stuff!!! Nice to see some actual numbers vs reading about.

@hasanfadhil6404 2 года назад

Clean AF, also great work on filming and editing Nike, keep up the good work.

@donaldlindsey8690 2 года назад

They look great ,thanks for another great how to video.

@RAPALAQ8 2 года назад

I love your cars

@Fredrox-wc4et 2 года назад

I'm patiently waiting for the borla exhaust vid........!.......

@derek0609 2 года назад

I have these on as well. nice product!

@Kapok6 Год назад

Check your IAT's back to back before and after the CF. a $40 amazon infrared thermometer is not going to give you any meaningful data.

@FriendlessJ 11 месяцев назад

Doesn’t look like you have a lot of room but what is you buy 2 of them and try to enclose the filter?

@twn2rbo 11 месяцев назад

Tbh, it wouldn’t make any difference. There’s no radiating heat coming from any other direction. These are more for show and when at a stand still doing a launch they help a tad. If I were to redo it, I would get the Takeda enclosed intakes that connect to the snorkels like on this video we did of the new 2023 GT2 NEW 2023 KIA STINGER GT2 “Grand Tourer” REVIEW ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--Yjd2y1nMfo.html

@daniellocke9534 2 года назад

Why not get those faux hood vents to work?

@twn2rbo 2 года назад

I’d rather get a heat extracted hood tbh, I don’t want to permanently mod the OEM equipment for the next build, but damn I wish those vents were functional bc I do like the design

@shaunsstinginggts4850 2 года назад

The TS Seibon carbon fiber hood on mine works great for heat extraction & looks sweet. In my opinion it's the best one for heat extraction & looks.👍

@bawskee4056 2 года назад

Where did you get your floor Matts??

@twn2rbo 2 года назад

TuxMat Inc www.tuxmat.com/

@OhTrappyTrap 2 года назад

So am I the only one that doesn’t know wth a turbo timer is? Lol

@camrusty 2 года назад

Is a heat shield needed for injens or naw

@twn2rbo 2 года назад

They do indeed block the heat, I tested them. Some people will get them for the look, it does make the engine bay look a lot better without breaking the bank. If you don’t go with Injen, I would look for an enclosed air intake system like AFe or VR intakes, but I would say this is a good buy for $150 being carbon fiber. Just my 2 cents

@2525miche Год назад

I don't quite agree with this carbon fiber method, the filter will still seek or suck up all the ambient heat that is trapped under the hood, it goes against the principles of proper engine operation.

@twn2rbo Год назад

It’s only benefit I seen was at idle , keeping some of the extreme heat off the cones, but yeah it’s a cosmetic mod for sure

@Kapok6 Год назад

Snake Oil.