Тёмный

Kinetic Log Splitter - Build | 0.7 sec Cycle 

Made in Poland
Подписаться 1,3 млн
Просмотров 3,5 млн
50% 1

Wood splitting can be very tedious and tiring, so I decided to make a kinetic wood splitter.
I tried to use the materials I had in the workshop, which made it an inexpensive project.
The log splitter is very fast and surprisingly powerful.
While doing this project, I didn't think it would be such a powerful machine.
The main frame is 100x100x3mm square tube.
The legs are made of a 40x40x3 square tube
The flywheel is 300mm in diameter and the pulley for the motors is 60mm. With 2800 rpm of the engine, it gives us the rotation of the shaft driving the rail of 560 rpm.
The flywheel weighs 20 kg.
The toothed racks (not hardened) are module 3 and have a length of 500mm + 60mm with a welded piece of steel.
The gears (only teeth hardened) are also module 3 and have 12 teeth each.
The whole thing weighs less than 100 kg.

Опубликовано:

 

27 окт 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 1 тыс.   
@MadeinPolandChannel
@MadeinPolandChannel 2 года назад
Hello our dear subscribers :) You deserve a few words of explanation why the activity on the channel was so low lately. I got married almost two months ago and there was a lot of preparation about it, then my wife and I went on a short honeymoon. In addition, there was a move to another city, which also took a lot of time. After returning to everyday life, I started a new project. Unfortunately, after almost three weeks of work, it turned out that it did not work as it should, and I had to stop working on it for the moment. I quickly started working on a new project. It took me about 8 working days and finally we have a new machine and therefore a new video. I can't promise you anything, but we will try to increase the frequency of adding videos. Thanks for being here. Best regards. Darek
@kostekmati2093
@kostekmati2093 2 года назад
Siema 👏💪👍🤠
@laiquocbao2565
@laiquocbao2565 2 года назад
Just be yourself and work at your own pace, Darek. With the pride you take and the consideration you have in your products, every single video is a big treat so no worry there
@Happy357mag
@Happy357mag 2 года назад
Congratulations. I'm happy for you. Keep up the great work!
@macmac19800
@macmac19800 2 года назад
Powodzenia na Nowej Drodze Życia, pozdrów Małżonkę :-). Z niecierpliwością czekam na kolejne filmy, pozdrawiam
@silvergrizzly316
@silvergrizzly316 2 года назад
Congratulations Darek on your new Bride!!! 👰‍♀ say hello to her from Jay👋. Brother, you work at your own pace, I'll be here no matter if you only post every three months. AWESOME BUILD!!! 👍👍
@WitchDr86
@WitchDr86 2 года назад
First off Congratulations on the marriage. secondly, I have been watching your videos for years, and I must say your fabrication skills and truly incredible. Thank you for the constant out put of amazing builds.
@peChoOO
@peChoOO 2 года назад
Good job bro! Congrats for 1M!👨‍🏭
@MadeinPolandChannel
@MadeinPolandChannel 2 года назад
Thanks Buddy:)
@oDrova
@oDrova 2 года назад
Это точно !
@JefesGarden
@JefesGarden 2 года назад
This channel could easily be called "Work Smarter Not Harder!" I love your ingenuity and the things you build. Nice work! 👍
@poprostuadam9192
@poprostuadam9192 2 года назад
"Imponuje mi to co robi Darek i chciałbym robić u niego za ucznia" :D, a tak na poważnie bardzo podziwiam pomysłowość i wykonanie.
@przemo1428
@przemo1428 2 года назад
A obecnie uczysz się na elektryka?
@poprostuadam9192
@poprostuadam9192 2 года назад
@@przemo1428 Jestem dumnym studentem pierwszego roku elektroniki więc prawie :D
@papalilburn
@papalilburn Год назад
Truly a awesome video, no unnecessary "banter," just a rapid, skillful build!
@dzonyinglisz1611
@dzonyinglisz1611 2 года назад
Uwielbiam takie produkcje, jestem pod wrażeniem. 👏👏👏
@eclip1991
@eclip1991 2 года назад
Oglądam Twój kanał już od dłuższego czasu i chciałbym tylko napisać, że imponuje mi Twoja pomysłowość, zaradność i dokładność wykonywania projektów. Sam trochę dłubię, ale nijak się to ma do tego co pokazujesz na filmikach. Także trzymaj się w tych nieciekawych czasach :)
@b155730
@b155730 2 года назад
Absolutely a true genius and an incredibly talented fabricator. Nice work
@N8SAY
@N8SAY 2 года назад
Don't worry about it. Glad you are back and congrats. That log splitter seems powerful enough to have a longer blade. Great work as always.
@randr10
@randr10 Год назад
I was thinking at first why go through all the trouble of doing it this way rather than just hydraulics, but then I realized this is much faster than those. Nice work. I like the use of the flywheel effect to provide inertia. It's very much like having a mechanical splitting maul.
@PAINC4K3
@PAINC4K3 2 года назад
Simply Amazing, the Speed that Piston comes out at is a bit scary tho. Keep your Hands Safe, you will need them to show us more of your Amazing Builds! Keep it up!
@danielbuckner2167
@danielbuckner2167 2 года назад
An easy CYA on the design with somethinng like this would be a second mechanical safety that must be engaged or disengaged like a spring pin release, thus using the second hand. That way nobody could ever accidentally crush their hand though it would really slow down the usage and make balancing the wood for more accurate. That would only be if I were making it for somebody else. He built it so I'm sure he knows what it's capable of.
@jwiereng
@jwiereng 2 года назад
No piston. See video, toothed rack and pinion
@danielbuckner2167
@danielbuckner2167 2 года назад
@@jwiereng Mechanically driven with intense pressure. No piston necessary to crush hand. Already watched video.
@zumbaleen
@zumbaleen 2 года назад
Lintzaag slijpmachine
@jivkadimitova280
@jivkadimitova280 Год назад
@@danielbuckner2167 21ijl1
@ireneuszszczepaniak5002
@ireneuszszczepaniak5002 2 года назад
Maszyna na czasie ,świetna robota!!!!!
@Happy357mag
@Happy357mag 2 года назад
Whenever I see a new Made in Poland video I stop what I'm doing and click. Excellent little log splitter, Looks very handy and powerful.
@MadeinPolandChannel
@MadeinPolandChannel 2 года назад
Thanks man!
@eqlibrium854
@eqlibrium854 2 года назад
Always awesome and inspiring work!! I always look forward to your videos. I love those Fire Ball shims and squares, they are great tools.
@antonioreinaldodelimareina4527
@antonioreinaldodelimareina4527 2 года назад
Parabéns grande profissional vc é um verdadeiro gênio em invenção!!!
@Patriottoo2
@Patriottoo2 2 года назад
Well, once again, you've made us feel so inadequate when working on our simple projects. Not many can do what you accomplish, even if they have the same tools. Congrats on the marriage!
@leon_mnl
@leon_mnl 2 года назад
congratulations on the marriage , this video was well worth the wait , you are a engineer genius!!
@the_fafologist
@the_fafologist Год назад
You take away all the fun with the old " How many Polish does it take" jokes. More like how many normal people does it take to do what you do lol. Been binge watching your channel for days now. So amazing what you do.
@motorv8N
@motorv8N Год назад
Congrats on getting married. Just celebrated our 28th anniversary this summer. Some bumpy times here and there but we’re hanging in! I’ve just discovered your channel and am really impressed by your creativity and technical expertise. One thing you might consider for this splitter is some kind of lock for the handle that requires a deliberate motion to move or squeeze - like a lever or button. The reason I say this is that when moving the wood you could accidentally hit the handle, activate the ram, and crush your hand. It looks like this nearly happened at 15:20 when removing split wood from the machine.
@DonnDIY
@DonnDIY 2 года назад
Will this cinematic log splitter be for your new house in another town?
@MadeinPolandChannel
@MadeinPolandChannel 2 года назад
I currently live in an apartment, but when I build a house, it will certainly come in handy :D
@jokamwellington4806
@jokamwellington4806 2 года назад
You both amazing videos creator
@kexx99
@kexx99 2 года назад
Кинематографический)))... Угарнул))
@charlesangell_bulmtl
@charlesangell_bulmtl 2 года назад
@@kexx99 😀😀😀
@MrCreativeEZ
@MrCreativeEZ Год назад
I am also a person with many skills. Watching this video, I really admire the remarkable meticulousness and patience of the master. thank you
@normcameron2316
@normcameron2316 2 года назад
Works like a charm. Fast and no hydraulic oil to spill. love it.
@wojciechnowacki7278
@wojciechnowacki7278 2 года назад
Widząc miniaturkę myślałem że to jakiś filmik reklamowy maszyny seryjnej. A tu takie zaskoczenie. Mega profesjonalne 💪
@opendstudio7141
@opendstudio7141 2 года назад
That took quiet a bit of engineering and skill. Nicely done and a bit scary. ☠🥩🩸
@GBWM_CNC
@GBWM_CNC 2 года назад
Super maszyna! Pomysłowość i wykonanie klasa! 😁
@farcry2798
@farcry2798 2 года назад
Fajnie, że mamy w Polsce ludzi którzy tyle potrafią, ale akurat ta maszyna ma dość dużo elementów, które mogą się zepsuć ze względu na działające siły. O bezpieczeństwie operatora już nawet nie wspominam, powiem tylko, że dużo lepszym rozwiązaniem są łuparki oparte o siłownik hydrauliczny
@franekkimonowy9412
@franekkimonowy9412 2 года назад
@@farcry2798 powiem wiecej , sa Ci ludzie na calym swiecie na wygnaniu i tam tez robia ROBOTE - pozdrawiam z UK
@MARFYMAKER
@MARFYMAKER 2 года назад
Beautiful work with attention to even the smallest details, congratulations (this is not good if you live in an apartment)
@davidoliver2826
@davidoliver2826 2 года назад
Your brilliant mind and amazing skills never cease to amaze me! Another project well done!
@Grayson203
@Grayson203 2 года назад
Congrats on 1 million, glad to see you supporting fireball tool
@bernardleighan3218
@bernardleighan3218 2 года назад
Congrats on getting married. The one thing I will say (from experience) is to always communicate with your wife. Things will go smoother if you both are one the same page. Thanks for the video. God Bless the both of you.
@MadeinPolandChannel
@MadeinPolandChannel 2 года назад
Thanks. God bless you to.
@chodechotchney5331
@chodechotchney5331 Год назад
Wife's are the worst
@tom98988
@tom98988 2 года назад
Juz wiem czemu ten gość tyle potrafi zrobić! W 12:30 widać że ma trzy ręce 😃
@pacomaciasarrate6809
@pacomaciasarrate6809 2 года назад
Beautiful work as always. Congratulations and may God bless your family.
@oddguy2829
@oddguy2829 2 года назад
No stupid two hand operation safety BS. Quick, powerful and efficient. Good work!
@seansysig
@seansysig 2 года назад
Congrats on the nuptials. Looks like the DR Kinetic Log Splitter inspired you to make one with heavy duty materials. Kudos to your innovative engineering.
2 года назад
greating!
@danek8527
@danek8527 2 года назад
Gratulacje za milion subskrypcji. Teraz lecisz po następny milion :)
@russru2502
@russru2502 2 года назад
It's very cool that you chose the silent video format. As a native speaker of another language, I am glad that I can easily view your videos. Thank you, very good work.
@adrianadim9836
@adrianadim9836 2 года назад
O kurcze ale fantastyczny sprzęt świąteczno-imprezowy. Dzień w dzień ognisko i pieczone kiełbaski. Szacun! Szacun za pomysł, szacun za chęci i przede wszystkim za park maszynowy. Bez niego te wszystkie cuda nie byłyby realne do stworzenia. Pozdrawiam.
@robertmanley7556
@robertmanley7556 2 года назад
Man I love your work.....so inspirational !! I wish you could post a video every day !! Also congratulations on 1 million subscribers !! My opinion you should have had that many long ago you have a AWESOME channel !! Always a great video and a cool project !! Totally a quick Log Splitter very nice work !! 👍👍
@peanut71968
@peanut71968 2 года назад
Love your vids, dude, and your talents are tops! Cheers and “carry-on”! 🤓
@CaptK-py8rq
@CaptK-py8rq Год назад
As always, magnificent engineering and construction!
@mar1video
@mar1video 2 года назад
Looks awesome ❗️ Wyglada wspaniale ❗️ ❤️
@turksoon.3385
@turksoon.3385 2 года назад
jak zwykle potężny projekt!
@Sean-ow8rf
@Sean-ow8rf 2 года назад
Very nice and congratulations! If I may. I think you could offer this for commercial sale with the addition of an interlock safety button depressed by the operators free hand. Nicely done sir!
@jlucasound
@jlucasound Год назад
Your slot marking technique is genius! I've never seen that and it is so simple and right there. Thank You for that! The Tensioner! More genius! The Motor will never drift.
@Aussiehomestead1965
@Aussiehomestead1965 Год назад
I agree. Easy way to do slots.
@dtice6191
@dtice6191 2 года назад
Excellent work young man! Didn’t forget to turn the gas on one time 😂😂👍
@jakubgie7660
@jakubgie7660 2 года назад
Kolejna bardzo dobra robota.Widać że fachowiec :)
@ukaszbojko5549
@ukaszbojko5549 2 года назад
tu już pakiet premium
@fastt11
@fastt11 2 года назад
@@ukaszbojko5549 za 500
@dakotamax2
@dakotamax2 2 года назад
Person: Hey Darek, have you ever built a [fill in the blank]? Darek: Yes.
@charlesangell_bulmtl
@charlesangell_bulmtl 2 года назад
😀
@silvergrizzly316
@silvergrizzly316 2 года назад
Darek, your skill level never ceases to amaze me!!! 👏 👍👍
@gothamantiquities2595
@gothamantiquities2595 Год назад
Proud of you, your fellow Pol brother from New York! Don’t give me that machine! I would toooo much fun with that and probably loose a few fingers! Lol
@user-mx4wq8bt1g
@user-mx4wq8bt1g 2 года назад
В плане изготовления все супер, в плане практичности под сомнеием!(топором махать легче чем подымать пеньки)
@SekAustria
@SekAustria 2 года назад
Nice project bro! Congrats on reaching 1M subs
@kmech3rd
@kmech3rd 2 года назад
An "Automatic Axe"... There's a phrase I've never heard before. But I like it!! Also, love watching you work with steel- I've never had a project come together as smoothly as yours seem to.
@lds8401
@lds8401 2 года назад
I like your videos without music in the background!
@PaszekoYT
@PaszekoYT 2 года назад
15:18 niebezpieczna sytuacja, warto pomyśleć o jakimś zabezpieczeniu. A tak poza tym jak zwykle super pomysł i wykonanie.
@joels7605
@joels7605 2 года назад
Yup. He nearly lost his right hand at 15:18 when he bumped that lever with the log.
@jorkozen8692
@jorkozen8692 2 года назад
Piękna robota
@henrikpanczak6312
@henrikpanczak6312 2 года назад
Nice to see you back again and all the best for your marriage! :-) You did again a grat job with this log splitter! Greetings from Germany!
@hillbillyfun9665
@hillbillyfun9665 2 года назад
Very good best I have seen on here period. Thank you
@Jurekk221
@Jurekk221 2 года назад
Super łuparka, masz niesamowite pomysły, tak trzymaj :)) Gratuluje miliona subskrybentów , pozdrawiam :)
@danielbuckner2167
@danielbuckner2167 2 года назад
Nice. After seeing it wobble just a bit and also seeing how it can easily cut bigger pieces I would be wondering if i could make a roll-on ramp to the side to aid in rolling very large pieces on it and also maybe a split leg up front for stability and moreso to act as stabilizer outriggers when it down on the ground.👍
@ZIMNY1972
@ZIMNY1972 2 года назад
Excellent. Especially safety covers on the transmission. Keep on doing! 😊
@TheDistur
@TheDistur 2 года назад
I've seen these for sale but never thought about how they were made. Interesting!
@texnikmexanik8086
@texnikmexanik8086 2 года назад
Я тут дрова топором рублю а он станок сделал😂😂😂 Што за ручная сверлилка? Резьбы ей резал!?
@tjkoker
@tjkoker 2 года назад
First, a hearty congratulations on your marriage. May God richly bless you. Second, as always, another great video. The only bad part is how down I feel when it ends. You showed me a fantastic way to do a long slot on the lathe. I never considered using the tool platform to hold the material. I really enjoyed this timely project. It's nearing winter in the U.S. and it will come in handy. Cheers.😁
@MadeinPolandChannel
@MadeinPolandChannel 2 года назад
Thanks! God bless you to! :)
@davewilmoth2444
@davewilmoth2444 2 года назад
You have a good idea and workmanship is good. Use heaver medal!
@dawsondemontiney1247
@dawsondemontiney1247 8 месяцев назад
Man that would be an awesome day to have all that equipped to work with. Blessed man/company.
@tedbastwock3810
@tedbastwock3810 Год назад
I don't believe I've ever seen an electric log splitter before, this is very cool, thanks for sharing
@user-ru8jq5pm4r
@user-ru8jq5pm4r 2 года назад
ชอบงานช่าง ศิลปะแขนงหนึ่งที่เพิ่งรู้ว่าชอบตอนอายุมาก ชอบไอเดียของแต่ละคน ชอบที่นำมาใช้ประโยชน์ได้จริงครับ.
@odl21
@odl21 2 года назад
Congrats. And that is a very cool machine that I’ve never seen before and is clearly mega useful
@milenko1965
@milenko1965 2 года назад
Congratulations and I hope you’re both very happy. Brilliant job on that log splitter. I made a similar one a few years back. It works well but it’s not as pretty as yours.
@bambambundy6
@bambambundy6 2 года назад
Dude Congratulations, I hope you and your new wife have many happy years!!!! Sir you have one of the best channels on the Tube and one of the few I look forward to!! Its some time in my day I get to watch something interesting and worthwhile!!!!
@spark23ca
@spark23ca 2 года назад
my uncle had a wood splitting business ...cut a at least 2 cord a day till he left the earth ...he used to rent out his splitter ...he had to put a slower pump on it cause people were losing fingers ...you are are good with tools and used to running dangerous stuff...if you rented that out some might get mad but they wouldn't be able to give you the finger ....great build i like that idea better then hydraulics ..if something brakes you can weld it rather then figure out a bunch frustrating hydraulics
@sacarido
@sacarido 2 года назад
Very Useful, amazing work. Thanks por recording! :)
@jrand2631
@jrand2631 2 года назад
Another great project very well done! 👏👏👏
@oziasteixeiradeandrade8
@oziasteixeiradeandrade8 2 года назад
Parabéns pelo seu esforço e trabalho muito bom vc é um gênio
@jacekfurga8768
@jacekfurga8768 2 года назад
Made in Poland jest przekozak, jego projekty rozwalają wszystko
@joelonderee2872
@joelonderee2872 2 года назад
Bravo! Another excellent demonstration of skill and craftsmanship. Congratulations on the marriage last year.
@solarfunction1847
@solarfunction1847 2 года назад
No need to explain Darek for your drought in video uploads mate as whenever you do share your uploads they show just how much of an outstanding craftsman that you are for such a young age too, well done mate & don't stress too much about setting routine goals on uploads, we'll appreciate all that you do when you do. Congrats on the wedding, I hope life fills you with joy in your personal life & with the work that you do.
@MadeinPolandChannel
@MadeinPolandChannel 2 года назад
Thank you!
@solarfunction1847
@solarfunction1847 2 года назад
@@MadeinPolandChannel Welcome mate from Perth, Western Australia.
@MCsCreations
@MCsCreations 2 года назад
Amazing work, dude! 😃 Fantastic how it works!!! Stay safe there with your family! 🖖😊
@netmanfra
@netmanfra 2 года назад
Cara, você é o melhor no que faz aqui no RU-vid. Continue produzindo vídeos que continuarei prestigiando-os.
@jerryglen986
@jerryglen986 2 года назад
Very talented gentleman 🍺🍺👍Married 25 years and it's my greatest decision of my life.
@mealex303
@mealex303 2 года назад
Absolute perfection as always and awesome vid edit
@Chris-pb3se
@Chris-pb3se 2 года назад
Congratulations on getting married! Good luck to you and Mrs MIP
@randyhager2054
@randyhager2054 2 года назад
Of all RU-vid content providers you deserve 1 MILLION subscribers Derek! Congratulation on your Wedding too!!!
@darrenthompson6115
@darrenthompson6115 2 года назад
Excellent skills with a practical use... as usual... great work you pair..👍👍
@hhhobby
@hhhobby 2 года назад
Piątka z plusem za frezowanie na tokarce i brawa za całość 👍🙂👌
@phillipcleaver7063
@phillipcleaver7063 2 года назад
Impressive inspirational originality , in short , nice one mate , respect , from across the north pond .
@Mstred
@Mstred 2 года назад
Super impressed at your skills and your workshop
@thekaduu
@thekaduu 2 года назад
You always do a good job my friend. This was no exception...
@user-ok2gy3re2v
@user-ok2gy3re2v 2 года назад
Уникально! Респект за работу!
@francobano
@francobano 2 года назад
Non si vedono mai dei pezzi di legno con dei nodi, sempre legni belli diritti che si spaccano anche con un colpo di accetta...
@dalejones4186
@dalejones4186 2 года назад
Great job. Life goes on. A big Congratulations to you and your new wife.
@mateuszx17
@mateuszx17 2 года назад
It's a pleasure to watch this film. Such a substle and very fast done work. I think this machine is done for efficient people because using this is a bit dangerous.
@krystian2792
@krystian2792 2 года назад
Jak zawsze profeska :)
@aleksandrsamodelki
@aleksandrsamodelki 2 года назад
Good afternoon! A great option is a woodcutter! Colleague, come in, I'm also doing woodcutters! 👍
@jean-francoi4083
@jean-francoi4083 2 года назад
Almost ready for the great recycling. Good on you!
@LitchKB
@LitchKB 2 года назад
That was suprisingly effective.
@gary3270
@gary3270 Год назад
Great engineering and skill in your builds!!!
@GomesQuat44
@GomesQuat44 2 года назад
one of the best builders in the world!
@selsovet71
@selsovet71 Год назад
Дружище твоей технической базе позавидуеш.👍Дровокол получился то,что надо!,удачи тебе и жду новых проэктов на канале. 🤝🤝🤝
@RaVgurgul
@RaVgurgul 2 года назад
Czego to Polak nie wymyśli 😅oby tak dalej!
@user-bu6ew4vq1j
@user-bu6ew4vq1j 2 года назад
Я очень впечатлён Вашим каналом .Мастер от Бога !!!Отличная мастерская ,отличная работа.Огромное уважение Вам ,здоровья ,успехов и процветания, за Ваш Труд.УДАЧИ!!!!
Далее
HIT - Extremely Strong Log Splitter
37:42
Просмотров 590 тыс.
HomeMade Kinetic Log splitter (better than hydraulic?)
32:17
Top 55 Genius Homemade Inventions
18:43
Просмотров 628 тыс.
Extreme Brush Cutter BuilD
23:22
Просмотров 3,4 млн
The Log Splitter that changed the Game
23:15
Просмотров 280 тыс.
Making Skid Steer Tracks
26:58
Просмотров 1,2 млн