Knife Maintenance Sucks Because You're Doing It Wrong...The Best EDC Screwdrivers For Knife Nerds!

Подписаться 138 тыс.

Просмотров 74 тыс.

50% 1

Get your Knafs "S5" Driver here: bit.ly/3ULJzs7
Wiha T-10 Bit 🤓: bit.ly/3GNLcQh
Ben just created what may be the best screwdriver/bit driver out there for tinkering with and upgrading your knife on the go! We sat down to have a full talk through of his new driver and see how it measures up with all the others. There is nothing worse then striping out pivot or scale screws when you are trying to do a little bit of maintenance. I've tried just about every tool out there so it was fun to see the though Ben has put into his new driver and why it really is so dang handy!
CRKT Driver: amzn.to/43B6c6r (affiliate link)
Benchmade Blue Box: amzn.to/3UTyipX (affiliate link)
Kershaw Driver: amzn.to/3KFbXaH (affiliate link)
Wiha/Boker Driver: amzn.to/40fN7nw (affiliate link)
0:01 Is this the best EDC Bit Driver?
0:16 The importance of being a tinkerer
0:48 Husky Homedepot Driver
2:12 Benchmade Blue Box
3:50 Wiha Tools and Bits
4:30 Price does matter
7:07 Knafs Driver Bits
10:04 Why we hesitate to work on our knives
11:36 Pen Drivers VS Box Drivers
16:08 Why length of driver is essential to not stripping your hardware
19:10 We all love a good fidget factor😁
20:03 What I would change about the Knafs Driver and why it's still great
23:13 It's always better to build up then break down
Disclaimer:
As an Amazon Associate I earn from qualifying purchases.

Опубликовано:

14 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 402

@sn1krep1 Год назад

BEN AND ZAC AT IT AGAIN??? Instantly the best video of the day! Love you guys ❣

@zacinthewild Год назад

Hope you dig it! The support means the world🤘

@Leftyotism Год назад

Already liked in second 6, lol.

@LoganIsOnYoutube Год назад

Best tip I’ve ever been given was to set up my phone to record disassembly. It helps so much for knives, firearms, cars, locks, etc. EVERYTHING. saved my butt a number of times

@zacinthewild Год назад

All day! Great tip!

@aaronmcclain1279 Год назад

@@zacinthewild . Do you have a email so we can send you pictures of are carries . I sent a pic on Instagram but it was never seen. I have updated version would like to show you.

@bwalsh2 Год назад

Everyone go buy this Knafs driver. Ben clearly needs the money because he can’t afford a haircut!

@zacinthewild Год назад

🤣🤣

@benbanters Год назад

The luscious locks are a choice. Maybe a poor choice? Hard to say. 🤣

@jonlouis2582 Год назад

Will do!

@jimshort9266 Год назад

@@benbanters … rock it! Go full Micheal Bolton!

@Pengelana_Rindu Год назад

😂

@chopperh4090 Год назад

I don’t know what it is about you two but could watch you all day talk about anything! Great as always. Thanks for the great products and entertainment!

@robertm9848 Год назад

Hats off to Ben. He's pretty much reinvented the wheel with every product he comes out with. He's a marketing genius to get people to buy this stuff.

@merryequipment Год назад

I personally went with the Wera Stubby magazine. I consider Wera Tools to be of the most premium quality and liked their magazine design/access the most. This thing does look super clean though!

@IvIidnight Год назад

Would like a T-10 as well. Don't have to give up the flathead, though, just add the T-10. It has room to carry 3 arlund the outside, and yku can just keep the 4th in the "user" position.

@_brianm Год назад

Just ordered mine. I’ve got more than enough drivers and bits from years of knife tinkering. Got this because: 1. It looks great 👍🏻 2. I appreciate the design thinking 3. Just want to support what you guys do for the knife community. Keep it up!

@zacinthewild Год назад

Really means a lot! Would love to hear your take on it!

@jimhewettjr3730 Год назад

I hope you guys continue to find reasons to continue making videos together. I always look forward to watching when I see a new one pop up in my RU-vid feed because of the fun friendly chemistry you guys have. 👍 ...and another fine Knafs project. Keep it up Ben 🙌

@nicholasprussia2707 Год назад

Love you guys. I've been tinkering and taking things apart since I was 4 and I just love tools and their design and how it feels in the hand and from this end it look like you hit this one out of the park...great job and keep doing what you doing 😁

@MichaelB2L Год назад

The driver looks awesome! Love how much thought Ben put into the design. Functionality and the colours are right up my street. Cheers guys!

@terryanderson4289 Год назад

I was literally just looking at Knafs and saw this driver when this video popped up. In my cart and getting ordered now! Love the work you both do in designing and educating people.

@zacinthewild Год назад

Yeah!🤘

@OreoDave Год назад

Ben makes things that are needed in the community. Well done, AGAIN 👍

@VisionWords Год назад

This looks great! I agree with Zac about the T10. It may not be as common as the flathead, but I need it for my Spyderco knives and I can use the flathead on my Victorinox. Also, the flathead is the easiest tool to improvise: a prybar, a dime, a key, even a fingernail can work in a pinch (at least to get by until you can find an actual flathead).

@DylanLey Год назад

Love hearing you and Ben talk about product design and philosophy!

@alexvelez4850 Год назад

I bought a KNAFS bit driver to swap the scales on one of my landers to black micarta scales, and this also happened to be my first time customizing a knife (I’m new to this knives hobby). I’m really happy with my purchase, especially after watching this video explaining the why behind the design! You’re making some really great stuff, Ben! And great video as always, Zac and Jamie!

@kevinwaterson Год назад

Buy cheap Chinese stuff or top tier stuff. Avoid the middle. Just getting out of collecting(outside a couple grails I may grab). Knives are 10x better than 10 years ago, and appear they will be 10x better in 10 more

@dano727 Год назад

I love the thought Ben brings to the knife world !

@REDNECKHUNTER75 Год назад

Just placed my order. Picked up the T10 bit as well. Looking forward to retiring the blue box and using a well made driver! Thanks for the great video Zac and Ben.

@zacinthewild Год назад

It is night and day! Let me know how you like it🤘

@baconfabian Год назад

I love when the both of you get together. Awesome content as always.

@jamesbarisitz4794 Год назад

Great new product Ben! Love the videos with you and Zak talking gear. ✌

@zacinthewild Год назад

Love sitting down with this dude!

@michaelsabo258 Год назад

Wow. Love the tool. Design a 1/4" version. I know you can do it! I use those all the time doing property maintenance. Not just knife stuff. Absolutely love your passion

@FreshPrincex21 Год назад

Another Zac and Ben video! I'm here for it! The moment I saw that Ben made a bit driver I ordered it immediately! Cant wait for it to arrive :)

@DampActionRC Год назад

No knifes in bags yet thank goodness, I did have one almost bagbound after dropping it in the parking lot, washers pivot and all, the sand and dirt stuck nicely to everything. Had to breakdown that brand new knife twice all because I wanted different scales. Worth it.

@556.45 Год назад

Hard to beat the Klein Tools precision driver set for a desk/toolbox setup, but this looks like a good compact option

@Loudog131978 Год назад

I really dig the Kline tools 22 in 1 technician driver. I keep I in my tool bag it had everything in it to take my Benchmade Barrage apart no problem. Not super portable but, a great tool.

@UnvarnishedTarnished Год назад

Immediately ordered, looks awesome. Ben knows what's up 🤘

@bigg7379 Год назад

Ordered. Looks awesome. Thanks guys!

@vgamble33 Год назад

Yep, got one ordered. Gotta support Ben! :D

@UnklKenny Год назад

Thank you Ben for another in a lone of awesome innovative tools.

@YPEDC Год назад

Been building a new EDC pouch to carry in my backpack. The new Knafs one looks like a good idea.

@knbservices Год назад

Gotta have one. Just ordered it Thanks

@twiggywolfedc 10 месяцев назад

The best entertainment duo ever!!!

@UnklKenny Год назад

I bought one over 3 weeks ago and have already used on a para 3 as well as 2 miguron knives and 2 cjrb knives and it has worked flawlessly on every torx encountered. Super fidget friendly and awesome to use.

@ewdijkstra7627 Год назад

Gonna have to grab one of these to upgrade the burrito at some point; while I have a larger IFIXIT bit driver set (I work mainly with computers and small electronics) that's ideal for general light duty and really weird fasteners, the one that came with the burrito is a bit insufficient for the intended application. Genuinely excellent function-informed design, and an inspiration to tinker and invent too. Really love these deeply introspective types of videos on EDC gear and the tools we use to maintain them. You're one of a few channels that really delve into the "why" of a tool's form or inclusion in a kit regularly, keep it up! And I'm the one-in-one hundred oddball that wants a phillips bit on it instead of the flathead. 😅

@benjaminhosaflook7287 Год назад

Love it! Haven’t gotten to check this one out yet. My daily “driver” is the griffin tool MK2 tool. Came with a set of wiha bits, ball bearing, 3 bits stored in the body, so yes, gotta dump it out, but its the 3 bits I need when servicing a knife, full size bits which I prefer, BUT, it’s a bit pricey. Great solution for the price!!!

@carlosprieto773 6 месяцев назад

"You had me at hello!", all kidding aside this is a nice driver! I've been looking for something like this that would cost me a fortune! Love this driver, thank you!

@madzero0 Год назад

Great timing. I was looking at a Big Idea screwdriver but I'm going for this one.

@timb4425 Год назад

The Knafs Bit Driver is fantastic! I cannot suggest it enough! I have gotten so many friends and family members to order one.

@jamesm9560 Год назад

Watched this, then 19 hours of RU-vid videos on bit drivers this gets suggested to me again. All great stories come back to the beginning.

@JustGorilla Год назад

I’ve had my KNAFS driver for a few weeks, it’s outstanding.

@piratetobin6968 Год назад

Linus and Ben have taught me that apparently I like collecting screwdrivers almost as much as I like collecting knives.

@Sanctified_EDC_Gear Год назад

Just went to Knafs and purchased one !!! 😎👍 Thanks Benn 😁👍

@pnwmarty66 Год назад

Yeah I ordered one today can't wait for it to get here It looks really sweet

@johnnewell5025 Год назад

I probably qualify as a bit-driver addict so I've got a lot of years and a lot of drivers, good and bad, to compare. I was interested enough to buy one of these (thanks for the quick shipping!) and was so impressed that I ordered a second copy the next day. 👍 The only small thing I'd change would be to offer a choice between T10, slotted and P1 when ordering, but that's a small point. Very well done, and thanks!

@bugoutxj2001 Год назад

I was ready to buy a Wiha GoBox micro driver set when I saw the Knafs driver launch. Great driver and awesome that it uses the Wiha bits. The feel, fit, and finish is great too.

@rasmuskrmmer715 Год назад

I thinking it's perfect. I need one. Hope i can get it to Denmark. Got me a lander last week and love it 😉👍🏼. Thank you Ben. And thanks Zac and Jamie love the canal. 👍🏼😁

@jameshaulenbeek5931 Год назад

Very cool! I've been looking at various tools like this recently and I wasn't very happy with any of them. I have a Kobalt micro driver tool that uses the 4mm bits, but they are trash - they twist so easily. Bit storage is another gripe of mine with so many of these tools. Just ordered 2 Knafs drivers and a set of extra bits - one for Spydie maintenance, the other for work. Work, I need the P1/2, and small slotted screws fairly regularly, and this is the perfect balance for all of it.

@cndspa Год назад

Great to see you two in a video again. Ben your hair looks great!

@The4cp Год назад

Definitely jumping on this when I can. I stripped the bits on the Kershaw fixing a 110 sport. The best bits for THAT price. Yep I'm doing it.

@Luk_at_me Год назад

I'm doing it wrong?!Impossible 🤬 Good to see you guys together 🫡

@waynekoster2841 Год назад

Love you're channel.

@grattof Год назад

Very ingenious design. Congrats to Ben for that. Great video guys

@unfi6798 Год назад

The nicest guy in Hollywood is Keanu Reeves. Whenever he makes a movie, it's a Blockbuster. The nicest guy in the Knife World is Ben of Knafs, whatever he touches turn to gold. We can feel the passion when Ben talks about a product. Great to see "fair dinkum" guys chatting & ranting (pros & cons) about their profession. Reckon Ben should create/invent a bit driver that could be use on multitools. Thought we throw that out there. Cowabunga.!!

@stevelord8662 Год назад

Thanks Zac an Ben.

@Justinator616 Год назад

I like how you can put together vans, engines, bikes, etc but the Boker is what gets ya!

@ryokaida7347 Год назад

Been looking into edc pocket drivers and this came at a good time :)

@knifetrain3118 Год назад

I have it and love it! I think $25 is definitely reasonable for this tool. I couldn’t believe how smooth the end cap is but you do need the seat belts on if your going to fidget.

@davedoesreviews Месяц назад

The S5! Great vid!

@WheatCitySole Год назад

The Benchmade Bluebox was my first bit set! Serviceable for what it is. Nice to have the 3 sizes. I do tend to prefer to have a T10 available.

@ravendon Год назад

I bought the knafs. Only negative is the bit holder is short so it can't fit double ended bits or store them on the sides because the cavities are too short. So the excellent Hoto Precision bits aren't compatible. But, the wiha bits work in the Hoto. The Hoto also stores 24 bits and isn't too much bigger than the Knafs.

@Ashton.everydaycarry Год назад

I'm such a tinkerer too. I'm always taking stuff apart kr fiddling with something. But man I've stripped a lot of t6 bits because they just weren't good bits. Super handy to see the bits on the outside so it's easy to grab the one you need! Super cool driver hopefully I'll pick one up soon.

@csuwatson04 Год назад

Bought it on launch day. It's perfect when paired with the Tool Burrito!

@josephascroft4774 9 месяцев назад

Love this video 👍

@shawnwhipple8503 Год назад

I use a bit driver all the time in my day job, and I've experimented with just about every brand out there and used them extensively. I landed on the Husky bit driver that was shown at the start of the video as the best for my needs and I've used one for years and years. On the Kanfs bit driver, I like the design choices Ben made. The choices he made make a lot of sense. The only thing I think I would have done differently is find a way to store the bit's internally, or more securely on the outside. Personally, I place a higher priority on being able to switch bits quickly and the seat belts seem fiddly and slow to use. I also think if you used the tool without the seat belts you would lose bits as you carried the tool around. I do think I'll buy one and try it out because other than the bit storage I love the design of the driver.

@xRebel151x 4 месяца назад

Ordered! I have the Audacious Concept Knife Tool XS for on the go knife stuff (incredible tool), but will use this for at home use! I also picked up a mat💪

@Ezserai Год назад

As a fellow Utahn I love this content

@joedidit9630 Год назад

I agree with Ben on everything he says for some reason. I am impressed by the design and the philosophy and the fact that he can compliment a competitor and still make something he believes is better.

@zacinthewild Год назад

He puts a ton of thought and R&D into his stuff for sure🤘

@mikehawton805 Год назад

Ben made it, how can it not be a win. Made with love

@Andrew-wb9kg Год назад

Glad to see another episod with you two guys. Couple of thoughts, although I haven't handled Ben's screwdriver yet, if it's hollow it could have fit 1,2,3 extra bits inside(guess you'd have to lose the spinning cap), it also looks like it could fit the 4'th bit on the outside among the other 3.

@perr5544 Год назад

glad to hear i'm not the only one who puts a knife , i couldn't put together again, in a ziplock to try again later.😅

@maxpower0481 Год назад

Been in the market for a driver and you guys sold me on this one. Knife Banter hasn’t been the same since you guys left.

@TorchHacker 11 месяцев назад

2x Wiha Bit Selector 1/4" Torx + 1x Engineer DST-06 to hold a screw + 1x Wera 813R to unscrew.

@drewmerka1300 Год назад

My favorite thing is buying something and then a day later seeing a video saying why it’s such a good product.

@cmfall1986 Год назад

Watched this and ordered on my iPad half way through. I also agree about the T10 thing. Ben’s website (and Amazon) seem to be out of stock. Once I find one of those- it will be perfection.

@CristoffelBonorand Год назад

This is awesome! Especially for an always on you tool. Now I use a PB Tools stubby driver which is really nice, and the lift style bit „garage“ is really cool, but I have it in my backpack, not my edc pouch. And no, I have none of my knives in ziplock bags, if I disassemble one, I will keep going until it’s back together again 😅

@cemetarygates2800 Год назад

Enjoyed it Zac. I'm for sure snag'n a couple of these drivers. Congrats on the cool design Ben.

@zacinthewild Год назад

Thanks!🙏

@cemetarygates2800 Год назад

@@zacinthewild Heck yeah dude. Love your channel.

@Ratchman_5000 Год назад

Zac and Ben = Zen I just got the Wiha torx bits selector because I didn't have a T6 to switch a pocket clip. Great video!

@zacinthewild Год назад

Love this!! I might have to steal it🤣

@Ratchman_5000 Год назад

@@zacinthewild 😄

@edcgearpocketknife Год назад

That new driver he designed looks awesome I must try one out.

@cheesemstr872 Год назад

I got a screwdriver from Amazon that's like those old pens that you can select the color. Only with different screwdriver tips, it's incredible

@d4ngerd4d Год назад

Just bought the Knafs driver a month or so ago after talking with Ben at Blade Show Texas. Honestly, I took the o-ring "seatbelts" off almost right away and fidget with this thing like crazy and have never had them fly off like they do in this video. I think it's fine without them. The driver truly is great though, just wish it had more bits. Thinking of getting a full bit kit of those smaller size Wiha bits just to keep handy.

@JohnnyTaxonomy 7 месяцев назад

So good to see these two together on screen again. I miss the older Blade HQ videos. I miss Kurt as well. Haha

@owenfulkerson7291 Год назад

I carry a CRKT driver at work and I really like it. Can carry four bits inside of it and it’s pretty compact. I work in IT and needed something for random screws I may need to undo when I’m not at my desk.

@jo3hamilton Год назад

I love it! I would have added knurling at the bottom where your fingers grip it

@jager-fett Год назад

That is a rad tool design. I will have to pick one up but I have to add this is not just for knives, a little driver is super useful for many other things. One random one, my nephew's 3rd birthday, every toy he got was screwed into the box, then needed a screwdriver for battery panels.... I have a multitool but this would have been amazing to use for that. Also this video was awesome, didn't think I would watch it to the end but great video.

@McRootbeer Год назад

I like the harbor freight icon bit ratchet set. It's more than the knafs driver, but it uses 1/4 bits, ratchets, has an extension, can be used as a T-handle, and comes with all the bits you need, and a 1/4 socket adaptor. Only drawbacks are the weight and cost, but it's a great one and done solution.

@kitanisthe Год назад

I bought two kits with CRKT brass drivers that have a leather roll up and about 15 bits.. but I like Ben's driver interest me.

@vantaEDC Год назад

got mine at blade show tx after talking with ben, it’s a fun fidget and even more useful lil guy.

@zacinthewild Год назад

I hate how much I love to fidget with it🤣

@jarofaar8618 Год назад

Wera is another German tool brand that makes a great thin bit driver

@jeremybernstein8808 Год назад

Outstanding, as always! Design question, could it be made with a 1/4” driver, and hollow out the storage areas more towards the center of the handle, to allow for storage of the larger bits? I’m not sure if I’m explaining my idea in a way that actually makes any sense 🤪. Regardless, I’ll be ordering one shortly. Wishing you both continued success!

@Leftyotism Год назад

11:53 Zac! CRKT also sells it in a leather scout roll with Wiha bits inside! That's the one I got this year as well! And I am loving it! If only Ben released his bit driver sooner, I might have gotten his one!

@jd4edc Год назад

This very interesting. Not that the Kershaw tool bothered me to dump the bits out, but it is noisy if you get to moving around as it jingles and adds a bearing feature with onboard storage. 👍

@SturleyArt Год назад

Looks awesome and I like the fidget factor. I'd be worried that the o rings would stretch out over time, or perish and go brittle. But that's because I work with o rings every day. I'd love this with expansion packs with everyday bits. Like slotted, Phillips 2 etc. I'm looking for an EDC driver (not just for knife adjustment) and this could be a great option.

@almost-punk Год назад

just bought the driver! also a t10 from wiha's site bc knafs out, lol. t6, t8 & t10 will be perfect for me with my EDC balisongs! been looking for something exactly like this, can't wait to try it!

@kalijasin Год назад

Agreed. T-10 would be nice.

@KAZOOBLOOM Год назад

I get the argument, but I really would love this design as a quarter inch bit too ha ha! Very nice work!

@emesser7087 Год назад

Awesome somone did this. Wera making awesome bits too

@ezequielikonikoff Год назад

I like it a lot! In my head it is associated with the world of knives, so I agree with Zac that I would put a T10, which however I can change if I want it for more generalized use. I hope it is available in my country so I can buy it.

@edcgearpocketknife Год назад

Shared to my group ❤❤ I’m gona pick one up Wednesday never use cheap bits. It will strip always use wiha or good strong bits.

@HickSquatch Год назад

As a retired IT guy, this screwdriver would be excellent in a technician kit!! Teeny laptop screws are perfect for this tool! I used Cornwell Tools precision driver set, which was great, but six individual drivers was fine in my toolbox at the shop, but not so much for field work

@allanarellanes1726 9 месяцев назад

Have you seen the ifixit mako kit. I used a laptop backpack and they fit in the small top pouch.

@RevPirateDan Год назад

I've gotten to the point where I take apart about 60% of my knives when I get them. But I enjoy that: seeing how they work and getting them opening and closing the way I like. So I don't have any knives sitting around in zipper bags. But now that's my new fear. 😁 On the other hand, I've been refining my small "knife maintenance kit" and a smaller, lighter bit driver is one of the biggest improvements I want to make. So there's a good chance I'll be getting this. Also, I need a new one of those stickers with the pie chart of things I use my knives for.

@brettcashmeredesigns688 Год назад

Dude I love the Knafs S5 bit driver. I carry it in my Data Crew pouch daily and it comes in handy. Funny thing about the Spyderco end post. I actually tried to use the bit driver end without a bit to push out the post and kinda messed up the aluminum end and had to file it smooth again haha. Super useful tool man. Actually thinking about getting a second one.