Who would not love to see a collection of fixed blades to use in the kitchen? Such as: A utlity, paring, peeler, and steak knife, but are not marketed as kitchen knives.
Why would you ever use a fix blade in the kitchen instead of a chef's knife or those designed for the kitchen if you could? Fixed blades dont stand a chance
@@MrAhuraMazda Good question. Perhaps CJRB Silax for utility, Artisan Sea Snake for peeling, CRKT Biwa for steak knives. Your choice of steels beats out the majority of "knives designed for kitchen use" in both steel and price. A Chef's knife is still a Chef's knife however.
Dear DCA/Thomas: I enjoy restoring old, rusty, banged-up slip-joints, usually Imperial, Camillus, etc. I look for knives that are abused past usability, then I take them apart, clean up the hardware, sharpen the blades, make new brass liners and micarta scales, resulting in a kinda new knife. One of my favorite moments is revealing the make of the knife under all the grime: those old stamps really hold up. I've noticed that very few modern knives feature stamped manufacturing information-it's almost always lasered. This means that, when these knives are rusty and banged up in the future, someone restoring them will run the risk of removing information as they sandpaper and buff away the goop. Question: why do modern knivemakers almost never stamp the tang? Is there something about supersteels that makes such a process difficult? Thanks!
I have some older slip joints in good condition but old. They are not my cup of tea but I appreciate them. If you are interested I’d sell them to you at a low price. I have very low tech skills and not sure how to contact you here without giving out the entire world my phone number and email. Anyway, just giving you info. Take care.
I’ve heard (I’m no expert, mind you, and can’t even really remember where I heard this from) that stamping is by its very nature more likely to create stress points in blades, which lasering almost completely works around However, I highly doubt there was ever an epidemic of old production folders snapping exclusively due to fractures stemming from stamped info on the blades, so it could also be down to a cost/convenience factor on the assembly line
I guess its cheaper to use a laser. Plus the production can be easily adjusted to any changes like logos, serial numbers or even other knives and so on...
@@wattsmichaeleHi. I wanted to give the original comment poster a chance to reply first. However, if he doesn’t respond to you, I’m also in the same boat and absolutely love to restore old slipjoints. They always end up in my pocket getting carried on new adventures. Lol. My grandpa and a friend of his got me into them almost 50 yrs ago and I def feel a kinship with them. They speak to me. So again, my friend, if the original comment poster doesn’t reply, I’d be glad to see what you have. I live in Canada but I’m sure we can work something out. Have a great day. Thanks you.
@@wattsmichaele Thanks for the offer! But I'm usually looking for knives that are in pretty poor condition: lots of rust, failed pivots, snapped-off tips. That way I'm bringing them back to life. I'll pass priority to the commenter from Canada who expressed interest. Thanks again!
Hi DCA and company! My kid (8 years old!) loves your videos and always wanted to ask a question since he saw one of my questions answered in one video. So he came up with the following one: "why are most of the knife sheaths made of leather?" My son Oier! Thanks a lot!
For a small edc for a fair price…Check out the QSP Canary folder. I also picked up a M390 Kizer Yorkie for $45 on sale. Kizer has some awesome sales right now.
That Böker Kihon is an amazing knife! My 100$ trio would be: Miguron Moyarl Crossbar, Petrified Fish PF719 and a Mora… and I would still have some money left for a nice cup of coffee. ;)
Hi, DCA! I always appreciate the deep cuts you occasionally sneak into these videos, like today's 4 Non Blondes reference slipped int without comment. ANYWAY, on to my question. I'm signing up for SCUBA diving classes, and one thing I'll need for actual diving is a diving knife. I've looked at a bunch of recommendation on scuba sites, and I don't love them. (Maybe I just haven't learned enough yet!) There are two knives that I'm familiar with (but do not own) that each cover *some* of what I (think) I want. 1. The Cold Steel SRK-C. - Pros: inexpensive, reliable, no moving parts, secure sheath that can withstand salt water - Cons: no high visibility handle, steel is "ok but not great" on corrosion resistance, very stabby tip, no serrations 2. The Spyderco Assist Salt Rescue - Pros: high-visibility handle, incredibly corrosion resistant steel, rounded tip to avoid accidental stabinating, serrations for cutting through lines and straps quickly - Cons: pricey for something that won't get used often and could end up at the bottom of the sea, opening and closing under water whilst wearing gloves could be an issue, no strong sheath Can you recommend something that has the best of both? Or that you think is a compromise that is better than either of these? (I'm actually considering getting the SRK-C and just grinding down the tip, getting a better smith than I am to put in some serrations, and then just being very careful to take proper care of it once out of the water. And yes, I realize you'll likely edit this whole thing way down. That's okay.)
Regarding steels and sharpening: The tougher a steel, the better blade it will make - FOR ME - Period. Like David, I can sharpen knives, something I could not do when I was young and impatient. Nowadays, I generally dislike most of the so-called 'Super Steels' because sharpening a damaged edge (and let's face it, eventually almost all knives will take edge damage) is ridiculously difficult with something like CPM-20CV. This is why my Doug Ritter Hogue MK I with a 20CV blade sits in a sheath on my headboard, and my Bestech Ronan or my Vosteed Raccoon with 14C28N always ride in my pocket today. The day someone makes a crossbar locking knife with a blade made from AEB-L (the greatest steel ever used to make a knife) I'll hand over a whole paycheck.
Glad you heard me yelling PF for the folding knife. Was afraid I wasn’t loud enough. That is my go to gift knife. Was Kizer. Now PF. Everyone loves them and I’m always thinking to myself that I should have kept it for myself. Thumbs up on the SRKs. Got those all over the place. Morakniv robust is usually tucked away with them. 👍 Expensive…ish knife beater is Benchmade Griptilian in 20CV and aftermarket scales. Got 3 of them on sale from you guys. 😉hated the cheap scales and upgraded. Love that knife. Zero rust issues here in the southeast. Great ergos.
100$ cap: Gentleman- victorinox bantam alox (24$) Fixed blade: cold steel recon tanto (40$) Edc folder: buck 110 slim Also, my most expensive knife is the TOPS operator 7 which is also my zombie apocalypse beater knife.
Hello DCA! How are you mate? We are advised to carry three cutting tools for woodcraft or survival. A field knife such as a golock for shelter building or an axe . A belt knife for general purpose and a pocket folding knife for 1st aid and smaller tasks. What is your opinion and choice? Thank you 🙏
Hey DCA/Thomas, I have a weird one for you! Because my job involves opening a ton of boxes, my ideal EDC is actually a box cutter (I daily carry a Chaves CHUB flipper), so I am looking for a 5th pocket knife specifically for the occasional small cutting task that is just too tough for that thin little utility blade to handle safely (think super heavy duty zip ties, etc). Budget isn't much of a concern and I don't need a lot of cutting edge or versatility as this is only a backup blade while I'm at work, so I am just looking for a stout little tank that can handle a little bit of hard use while still feeling secure in my own slightly larger than average hands. Any help would be very much appreciated, and thanks for all the great and informative videos!! Note: I got super excited when I saw the new CRKT Minnow as it looked shockingly perfect for my somewhat unusual needs, but was super disappointed when I saw the way the pocket clip is lazily mounted because it looks like the the screws stick up enough to prevent the knife from sliding down into the pocket and out of the way. Any truth to this?
My three knife combo for $100 that I current carry. Mora Kansbol $36.99, Camillus LK-6 $24.99 and Sog Tellus FLK $39.99 for a grand total of $101.97. These knives have served me well.
I have a Boker Kihon DC that I bought after you featured it. First purchase from Knife Center, and first crossbar lock. Unbeatable for the price, I use it every day.
Hello DCA and crew. I’ve really been enjoying the KniFAQ series. A question for you on folding knife lock styles: With all of the locking styles out there these days, which one would you pick as having the most functional longevity? By this I mean, what will still be locking up safe and strong after 20+ years of carry and use? My lock backs have seen the most use over the decades and are still going strong. I’ve been into button locks lately, but I feel like they won’t be as reliable long term.
Hey DCA, if you were building multiple "bug out" bags (8 or so), and they were going to be stored in trunks of cars for long periods of time between any sort of periodic maintenance, what 3 to 3.5 inch folder would you suggest? Keeping in mind, there will already be a victorinox classic, as well as a first aid kit in each.
S30 or s35 blade steel. Low maintenance nice edge and good strength . Would prefer the s35vn . But you didn't give a budget and that is a lot of knives . So maybe 14c28n .and there are a lot of good knives with that steel . Civivi in particular.
I love the feel of a folding knife with a contoured handle. Yet, I've never seen a comprehensive list of which knives actually have a contoured handle or which are the best ones. Can you put together a list of contoured handle folders or recommendations of knives with this feature?
I LOVE your videos. Keep making them. What are the toughest steels used in machetes? Mine is in 1075. It takes an edge well, but it chips badly. I'd like to try one that's less prone to chipping; I'm willing to sacrifice a bit of sharpness.
Edit: Subbing out the Kershaw for the Bestechman Ronin: $51.90 so we can keep it under $100 ($93.86 total). This leaves room to pick up a different Mora knife and keeps the same fun action with the crossbar knife. Executive knife-the Swiss tech Gerundet: $29.97 (Daily folder-Kershaw Iridium: $64.95(tanto or gray)) Fixed blade-Mora basic 511: $11.99 that's over by $6 unless we can find these knives for cheaper 🤷. I stand by these picks even if it's a little over budget
When will Condor finally send that sweet, sweet shipment of 2024 models!?! (Ex: Bushscot) It’s almost time to get “lost in the woods….” A week long hike sounds like just what the doctor ordered. What would be your knife pick for a long distance hike? (Must be light, handle fire craft, food prep, the works) 👍🏼
My choice is the camp creek by tops . The lionsteel m7 is my go to but that is heavier than most would like to carry. The boker bronco , or cold steel hunter in 3v are both excellent choices as well .
Well, okay, then. (These are current Amazon prices). 1) Fixie--CS Peacemaker ll--about $28. 2) EDC folder--Either a Flissa 3.5" serrated crossbar folder ($15) or S&W M&P Spec Ops assisted 4" ($17.50 on sale right now.) 3) CS XL Luzon 6" (for gentlemen with extra-large pockets)--about $45. That leaves about $30 for another knife, so--Eafengrow folder, take your pick.
Trio: Gerber affinity copper or aluminum (36/49) or Bear and Son liner lock flipper (30); Honey Badger 1004 large flipper (36) or QSP Penguin with carbon handles (39); mora companion HD (20) or Cold Steel SRK compact (33). Most expensive combo is $118; least is $86.
Hi there, Not sure if you’ve done this previously, I wondered if you could do a top 10 knives 3 inch or less for us frustrated knife lovers in Scotland UK. Cheers Iain
In California, the school zone laws are similar to your laws in Scotland, so I have to switch to carrying these knives when I know I have to go to a school zone.
I also use my Chris Reeve knives for all sorts of things. But I find the blade too delicate for really hard work. For those jobs I would choose a Hinderer or Rockstead.
Morakniv Mora of Sweden Outdoor 2000 Utility Knife 4.3" and a Civivi Vision. Just two knives as the Vision is both EDC and gentlemanly - no need for a third blade.
$100 for three knives? Waste of time. Just get a Victorinox Farmer X in Silver Alox (which won't show wear like the color anodized models) for $75, and that will be your EDC & "gentleman's" folding knife. Take the $25 left over and get a Mora 546 for $14 or Pro S for $18. Use the change to buy yourself a beer.
My most edc'ed knife is easily my Kunwu Orian. And it lives in my pocket . I have we , civivi, lionsteel, boker and benchmade folders . But that Kunwu, it just feels right . And I have a few good blade steels . D2,14c28n ,vg10, s35vn ,3v,20cv s45vn . But the vanax on the Kunwu is something else .
I'd go Cold Steel SRK-C (though I've never handled one it seems great for the money) for the fixed blade, Leatherman Micra for the gentleman's knife, and a Civivi Mini Praxis for the EDC. Comes out to basically $100 on the dot. I'd be a lot happier if I had like $150 to spend though.
I wouldn't hesitate to use my Hinderer XM-18 in any situation. I also wouldn't hesitate to use my Microtech Scarab II, Fallkniven PXL, or Benchmade Adamas.
Love this video. We are knife geeks, but if you look at it like this video - you don't need more. How many of us are survivalists? Who needs a "tactical" blade? Even if you need a specialty application - do you need more than 3 knives total?
You don't gotta be a survivalist to need a tough knife. I like to go fishing and hiking I could end up in a survival situation. And tactical knives are just though knives usually that happen to be black. Which that black coating helps prevent rust in more humid environments.
Hello DCA. A fellow from Sweden here. The ice is finally breaking of from the river here outside and fishing season is getting closer every day. But I'm missing a good fishing knife for the new season. I do have an old Mora (ofcorse, I'm swedish) and Roxon 803 Elite multitool with a little saw and pliers. They are helpful but I feel the need for a good folder or fixblade. I would like a knife to be able to cut some fish and do some light woodworking done when I'm on the river bank. Would like to see some knifes around 50-160$. Thank you for all your helpfull tips!
Just bought the AD20.5 with milled titanium scales and it feel ultra durable and some how also premium because of the tight tolerances I think like you mentioned on the cibenza.
Hey DCA, what up Thomas. Im not sure if you guys have done this yet, but it'd be fun to watch you and Seth have a 5 knife challenge on an episode of between two blades. With a budget of say... $500 you guys pick any combination of 5 knives based on the usual criteria and compair the results. I know you guys have done similar experiments in the past, but I truly enjoy watching the thought process you both use in your decisions.
K bar Dozier, cold steel Canadian belt knife, Victorinox tinker. Boom, didn't even have to think about it. I haven't added it up but I'd bet that's easily under $100, and these knives are going to last.
Hi David, If you were invited to a wedding of two knives, the male was 235VN and the female was Magnacut. What steel knife would you bring so as not to offend the marrying couple?
So if you lost all your knives and had to rebuild your collection, what would be your first 5 knives. 1 being a work fixed blade, a compact fixed blade, a edc pocket knife, a gentleman’s knife, and a multi tool
I prefer light folders (under 3 ounces) with short blades (say, under 3.25 inches) and long handles (say, 4 plus inches). I like lockbacks and own Ka-Bar Dozier, Delica, and Buck 112 Slim Select. Others?
Hey DCA, would love to hear your opinion on the following criteria for an edc/survival fixed blade knife preferably under $150. The knife will be carried for self defense, harder edc tasks and outdoor activities.(carving, food prep, and batoning if needed) Should be able to be carried in the waistband appendix concealed carry, with a flat grind, drop or clip point blade around 3 inches in length. Also a comfortable handle (i love g10) not forgetting a reliable finger guard. I currently carry my Esee izula II w/Ulti clip but would love something with a longer edge holding steel, but not comprising the toughness ( maybe CruWear) so it will still be a work horse of a knife. This will be paired with my edc folder. Any suggestions? Thx, keep up the great content.
Hey DCA! Imagine you can only have 3 traditional knives...1 for edc, 1 for outdoors and one to have as display knife on top of you chimney....what would you choose and keep it under $400
I'm in the process of making a handle and sheath for a jääkäripuukko 85, and I've totally been bitten by the maker bug! What other knife blanks can you recommend? Any other knife related crafting ideas would be appreciated too! :)
The great part about a mora is theyre cheap, reliable, and comfortable. The downside is they look weird, and you cant really conceal edc them because of the shape. And they're all short.
Hard use folding knives? The first general name that pops up in: Cold Steel. If I had an AD-10, a 4-Max, or a 5-Max, I'd figure I could do anything a knife could ever do. The AD-10 and the 4-Max both are some of the hardest built knives out there. If I could only have only one folder to use for the rest of my life, it might just be the AD-10. Unless I'm using a Sebenza, I think the AD-10 might be the most bomb-proof knife made. If I were on a budget, the AD-10 Lite for $92 or the 4-Max Scout for $71 would be knives I'd bet my survival on.
Hi DCA and Thomas, I have a question: what is a folder that is priced higher than you are comfortable spending on one that you have handled and lusted after? I am curious if there is a knife more expensive than the Sebenza that you have been eyeing or is the Sebenza just that good in your eyes.
Hello DCA (and Thomas). Looking to purchase a fixed blade for hard use, but wouldn't look out of place in an EDC scenario. Lots of good looking knifes do not have handles/scales (like the Benchmade adamas fixed blade). My question is: what is the benefit to purchasing a fixed blade with just a steel handle, if any? Is there a time where this kind of fixed blade is preferred over a normal fixed blade with micarta, g10, or wood handles? Thanks, and appreciate the consistent content :)
O1 steel is one of the most popular steels for bushcraft knives and small woodcarving knives. Why is it not used more in folders and other types of fixed blades?
Schrade schf36. $27.95 Cold steel $39.95 Cold steel all terrain chopper $32.95 And ya get a sharpening stone and ferro rod with the Schrade!!! (Yeah whateva so I'm over by 85 cent but still)
Question from a noob digging into the knife world. Are knives actually collectible in the sense that there is a legitimate potential prophit to be had down the road if you purchase the right knife for your collection? Or is it more of a hobbyist activity? I've watched a ton of your videos already but only see knives available for current sale obviously cuz that's what you do. But I don't see any inclusions on knife selection for knives that can only be bought second hand. I want to make sure I'm approaching future purchases with the right mindset, especially when purchasing knives of higher value. Should I stick to my personal preferences only or are there other considerations I should make? And one simpler question....are slip joints obsolete and mainly only bought by old men based on experience and nostalia with them, or is there any advantage they have to modern locking mechaisms? Thanks!
There are iconic/discontinued knives out there that have a cult following. The problem is that there are already so many of them that they would be hard to sell at a profit. Finding something like that could get very time-consuming (and expensive). I would just buy what I like to fill my personal niches. I have an old Case that my dad carried for years--I'm keeping it, but I wouldn't use it. The newer locking mechanisms are quite strong, easy to use, and reliable.
I have a question….., why aren’t you guys more active in the community here? You guys should be in the live streams and active!! It could only do one thing and that’s help sell more of your knives!? All of this of course is all my opinion!! Love and good vibes regardless!!
For your 3 under $100. Can a fixed blade do double duties? Be your fixed blade and your gentleman's knife? I mean I know it can do the everyday carry, but can you just spend $100 on a smaller edc fixed blade and have all three?
They make a Swiss Army knife with fingernail clippers, in a small knife with the regular Swiss Army knife cool stuff like tweezers and toothpick. The one I have has small scissors. The whole package is small and freaking incredible. Highly recommended!!!!!!
I'd love to know your opinion on an EDC folding knife with finger safe lock, either sub 3 inch blade or right around 3 inches, deep carry clip, under or right around $100. I'd prefer micarta scales but they might be making it too particular.
Hey DCA, I'm fairly new to the knife world and i don't know that many good value knives or knife brands and was looking for some options. I'm looking for a premium feeling knife around the $100 - $250 mark though if its a bit over that's fine and, due to knife laws in my country, ideally it would have a blade under 3.35 inches. If you do answer this thank you very much and I love your content.
Hi, I recently bought the Black Fox B. Key knife to use as necklace as I was looking for a knife that would not look like a knife? Though I am happy with my choice, what could be other knives that can be used as necklaces but do not look like a knife? Would the CRKT CEO fit that description? Thanks!
Mr. DCA, I'm currently looking at either the zero tolerance 0308blkts or the microtech amphibian as my next hard use folder to replace my aging zt 0303. Could you do a video segment comparing the two? I'm interested in how the steels and edge geometries compare. I love my old 0303 and have carried an 0301 and 0303 for about 12 years, but I just want to retire them.
My partner is in need of a folding knife. She wants a blade that is serrated, ideally made in USA, Japan, or Europe, and using a more natural handle material. Fidget factor is not important, price should be less than 200$. What would you recommend?
Hey DCA! As we all know, the Kershaw Skyline is the best knife ever made. As such it was named after the “Skyline” GTR, the best car ever made. What other knives are named after cars?