KNOX PV 5600 Hybrid Inverter Firmware Upgrade to Version 84.00 

Waslam brother

Hello

Sorry dear ye apko company sy milay ga. Mein to khud apki tarah end user hun apni zaroorat k mutabiq efforts Kar k apnay inverter k leay talash kia aur phir community k sath share kar dia

Sorry can't understand your question

How to know the current version of invertor

You can know the current version with the help of app. This app can be connected with the help of communication cable or wifi

Sorry sir no idea about this model

Sorry don't have

There is problem with your cable. Secondly did you try to flash the firmware without wapda and battery? It should not have be flashed without all the sources connected. Is your inverter power on and working now? You can contact at nabeelraza.geo@gmail.com for further discussion please

It is fine no issue. Let it be same

Sir, please aap agr 56.72 firmware share kar dein to aapki nawazish ho ge. Aur me email pe request b ki hoie ha aap se. JzkAllah

No firmware update will be done when inverter is connected to wapda, solar and battery(if available) in case wapda chali jay to battery process ko ruknay nahi deti. Inverter wapda auto off Kar deta hay during update but battery and solar sy current leta rehta hay

@@Chobkar Sir only pv pe update ho skta hai kiun k mene batteries nahi install ki huein

@tanveerulhassan5287 update when pv and wapda is available because during update pv cut ho jay gi to update k leay phir wapda power dy ga

You can check my other video regarding AC and DC earthing. Secondly reverse light on the meter is on due to comment earth from meter. Do not make wapda neutral common and use in the ups direct from pole. Use the neutral wire that is coming from your meter not from the pole

Bahi Mera Knox 5600 inverter rat ko wapda meter pr revers or earth ki light on kr deta h to kya framvear update se thek ho skta h

Waslam brother. Share your contact number but I would not recommend the upgrade because latest firmware has bugs it reduces the solar generation and increase battery discharge. I shall be reverting back to version 56 once I get the old firmware from company

Does this ASW10K-LT-G2 model have any update how to know? ​@@Chobkar

You can check it with the help of watch power app. How to connect to the app? The procedure is in the first part of the video

No it is not necessary. Company just primary firmware he upgrade Kar rahi hay. Meiny jitnay bhe firmwares leay hein company sy un mein secondary same hay primary upgrade hay just

My current firmware are as follows main 56.72 while secondary is 39.26. Is there update available for both CPU?

Only main cpu version upgrade is available but I would not recommend update as it has bugs. I updated to version 84 but then reverted back to version 56 as version 84 has bugs and it reduces the solar generation by 40%. Version 84.00 does not utilise full current received from PV

@@Chobkar thank you

Welcome