KPN FIBER Internet, Getting Faster Internet! Bye Ziggo!

Подписаться 36 тыс.

Просмотров 2,3 тыс.

50% 1

This video is sponsored by PCBWay www.pcbway.com/
If you want your circuit board design realized and printed, You should check out PCBway Starting Prices as low as 5$ for a 1 or 2 layer design. Place your order now!!
PCBWay open source projects: www.pcbway.com...
BlueSCSI 50pin -- www.pcbway.com...
KPN FIBER Internet, Getting Faster Internet! Bye Ziggo!
Im Installing fiber internet! Finally a synchronized connection 1gb up and 1 gb down! The Only issue is the modem! Where did we hear that before haha Yes with Ziggo!
_______________________________________________________
This is the list with part that I used with Amazon affiliated links: #CommissionsEarned
AMD Ryzen 9 7950X US: amzn.to/3PeK9gU EU: amzn.to/3ReBRHt
ASUS ProArt X670E-CREATOR US: amzn.to/3EdtSlZ EU: amzn.to/45roN5s
ASUS ProArt GeForce RTX 4080 US: amzn.to/3EgA4tI EU: amzn.to/3svSEeJ
Noctua NH-D15S US: amzn.to/464OSYj EU: amzn.to/3R2utyN
Noctua NF-A12x25 US: amzn.to/44xgzYm EU: amzn.to/44uX02K
Corsair Vengeance 96GB DDR5 US: amzn.to/3srHQ14 EU: amzn.to/3YPGcm1
Corsair HX1000i ATX3.0 US: amzn.to/47JoDrX EU: amzn.to/3ssrtl1
Fractal Design North US: amzn.to/3YZTbBF EU: amzn.to/3R2uG53
WD Black SN850X 4TB US: amzn.to/47S4BLE EU: amzn.to/3ReBXPl
_______________________________________________________
tweakers.net/g...
_______________________________________________________
I started a Discord server it only cost 1$ each month to join! So go to my Patreon to support me each month! / retromachines
Big thanks to my Patreon supporters you are awesome!
Follow me on Twitter / victorebart
If you like to send me old computer parts please send me a youtube or twitter message!

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@philscomputerlab 6 месяцев назад

1 GigaBYTE 😮 That's amazing 😍

@YtheMain 6 месяцев назад

My thoughts exactly. Wat is het nu Bart, gigabit per seconde neem ik aan?

@victorbart 6 месяцев назад

@@YtheMain 1 gigabit :)

@jordivanselm3201 6 месяцев назад

I got 4 Gbit/s but that makes no sense

@philscomputerlab 6 месяцев назад

@@jordivanselm3201 Obviously a mix up, I do it sometimes when a retro card suddenly had 128 GB RAM haha.

@paulmichaelfreedman8334 6 месяцев назад

Tuurlijk is het 1 Gigabit. Snelste wat KPN nu biedt is 4 Ik weet nog dat onze systeembeheerder in 2001 het kantoor binnen kwam jubelen - "We hebben breedband internet!!!" - 1 Mbps over adsl-1 😂, hiervoor moesten 50 man over een enkel ISDN-2 lijntje alles doen

@ianmcass 6 месяцев назад

Interesting. In UK it's a little different. The network provider will supply the fibre service that includes the optical to RJ45 converter (ONT). The ISP will then provide the router which will connect to their service over the fibre provider using some form of encapsulation. In my case, this is PPPoE. I replaced their router with my own Ubiquiti Edgerouter.

@VioletDragonsProjects 6 месяцев назад

Not if it’s a business connection.

@bundesautobahn7 6 месяцев назад

What type of fibre connection is that you have? Is that full fibre to the home? And what type of old style phone connection do you use in NL because it evidently is not German TAE, or US RJ11 (which we use here in Costa Rica as well). I personally got fibre to the home, with the box that connects the fibre connection with the router being passive though, because it doesn't need external power.

@paulmichaelfreedman8334 6 месяцев назад

The old phone lines used simple 2 wire comms over rj11 connectors in-house, but the wall outlet was a trapezoidal 4-pin, developed by PTT (former name of KPN) somewhere in the 1950's or so. Some people like me replaced them with dual rj-45 outlets for both 100Mbps network and a phone line (over a single cat 5e twisted pair cable).

@StenIsaksson 6 месяцев назад

1 Gbyte? So you got a 10 Gbit connection? Wow. ;) Can't you set the modem to bridge mode and only use pfSense? Or only use pfSense?

@damouze 6 месяцев назад

I don't think that's possible with the KPN modem/routers. I have no experience with model 12, but just like with VB's router, the earlier models have been configured to disable just about everything that you could change about it. Very useful for inexperienced consumers, but infinitely frustrating for power users like VB or you or me, who prefer to have as much control over their internet connection as possible. Personally, I find KPN's modem/routers a bit fiddly. Their main pre is that they usually work out of the box, their main con is that for more advanced customers, the lack of features that are enabled is frustrating to say the least. Also, the routers must be cheap as hell, because I have a spare one in my closet that I was specificall told not to send back to them. Apparently they have warehouses full of them...

@paulmichaelfreedman8334 6 месяцев назад

KPN recently raised the Max speed to 4 Gbit per fibre. I was 1 Gbit, which is probably what Victor has. 4 Gbit only has merit if : 1. You have many people on your network raping the internet, and 2. You already have 5 or 10 Gbit in your home, which currently is still a bit too expensive for us poor budget bastards. I have the KPN 1 Gbit connection since 2020 and I've been exceedingly satisfied with it. Never had any serious outages, besides the occasional nightly interruption due to maintenance. I use a Raspberry Pi 4B with Openwrt - MUCH faster than the stock KPN experia boxes, especially when you're doing things that tend to choke up the NAT table (Bittorent etc) and still very low power consumption.

@ShumanGore 6 месяцев назад

can confirm that switching from coax (VTR, missing chilean cousin of Ziggo) to fiber (symmetrical 1gb from Telefónica) is a whole world of difference I also had that very same Arris white box, you had to call to customer service if you wanted to use it as a bridge for another router

@csparty11 6 месяцев назад

Mijn ervaring is dat ziggo niet perse direct de verbinding uitschakelt na overstap bevestiging, ik denk dat je gewoon pech had hiermee. Verder moet je is kijken of je niet alsnog de IP instellingen kunt wijzigen, want misschien zat er idd een bug in maar meer omdat je DHCP range op .1 begint en als je dan het modem IP adres naar .1 wijzigt moet je eerst die DHCP range wijzigen. Dat zou wel eens het probleem kunnen zijn geweest waarom eea niet lukte. Trouwens waarom haal je niet zelf een Fritzbox 7590 van Marktplaats bijv.? Die werkt out of the box met KPN en daar kun je letterlijk alles aan instellen.

@aRandomHomelabber 6 месяцев назад

Still wating here to get kpn to connect us to fiber. If your going to make a video on pfsense on kpn fiber please make that. make a good tutorial will help many of us i think

@Gr00t 6 месяцев назад

Very nice man! I'm still stuck on 75/10 :(

@skynetcybersystem3tech 6 месяцев назад

👍

@gert106xsi 6 месяцев назад

Got a Ziggo advertisement when I started this video. Nice try... we have FTTH for a year of 12 now I think and it worked flawlessy ever since. I pulled out all the coax cables in my house.

@michaelharbuck3314 6 месяцев назад

ipv6... nice

@marinustennapel2661 6 месяцев назад

Such a shame it's KPN. That company sucks. Starting with their routers. And the fact they deliberately make it a pain to replace it with your own. Not to mention the fact the actively hindered the rollout of fiber for years.

@paulmichaelfreedman8334 6 месяцев назад

It's NOT a pain to use your own router, that is BS. I got KPN Fibre in 2020 , and after testing the pipe with the experiabox, I immediately replaced it with a Raspberry Pi 4B with OpenWRT. Works like a charm, although it does require a bit more technical knowledge. KPN has manuals online how to set your own gateway's config to connect to KPN's gateway. I don't like KPN either, but to be honest they are not much of a hassle nowadays, Fibre rollout is near complete finally and that will serve us well for the coming decades. They also absorbed all XS4All personnel into their KPN helpdesk, and a lot of them are actual gurus. Fibre clients always have access to these guys if they wish to. And as someone who has worked in data networking for quite some years, I can tell when helpdesks are bullshitting me or not, but in their case their knowledge actually surprised ME sometimes.

@okoeroo 6 месяцев назад

Have you found the technical instructions online with all the details? Since the vrije modem service stuff this is published info.

@etrangersatgmailcom 6 месяцев назад

In France, we get all our equipment from an Internet service provider and it is basically impossible to replace it with another/different brand without getting a PhD in this matter :) But in principle, there is no point, since we get symmetrical fiber optic 8Gb/8Gb where in the router we have 4x2.5Gb and one connector that allows us to obtain symmetrical 8Gb on one computer. Plus Wifi 7. It costs 50 euros a month, but it's worth it