Went to the range the other day with a Springer and had a go on a PCP for the first time. 2 days later I went straight out and purchased my very own NP 02 and it is a superb bit of kit and I've fallen in love all over again. When you try a PCP for the first the so will you
Hello Soren, they're the best budget gun on the market in my view, price, easy to maintain, shot count, not pellet fussy as other more expensive pcp's, thanks for the feedback, Best Regards, Jon 👍😁
Good honest review. Mine is .177 and I’ll put it against any FX etc. Why pay ridiculous prices for a PCP from all the thoroughbred stables when £360 will get you a gun which shoots all day on one fill and deliver incredible accuracy? Just give the barrel a thorough clean first and away you go. Not pellet fussy, either. Get a turkey for Christmas!!!
Sorry for the delay mate, very true, I'm hoping to get the new laminate next generation soon, got a real soft spot for these little monsters, thanks for the feedback, Best Regards, Jon 👍😁
A .22 is every bit as accurate as a .177 when both are zeroed at any given range - it's just that .177 flys flatter than a .22 at 12ft/lb, making it more forgiving of errors in range estimation by the shooter,
Hello Michael, the NP02 Is left hand cycle, the N07 puncher is right hand cycle that's how they arrive from Kral Arms, some models are left cycle & others are right cycle, I don't mind left cycle as it aids keeping on target with a right handed shooter. Hope the info helps, Jon 👍
Thanks Chris, it's the Hawke 4x16x50 vantage IR, & the Umerex K3 Neo, gave best overall performance, though the A&M Marksman silencer was the quietest, hope the info helps, Best Regards, Jon 👍
Thank you John that's very helpful. I am undecided between the Kral NP02 or the Walther RM8. I will only be shooting paper targets once the police approve my club application. Which gun would you recommend. Kind Regards.
@@cbkipper Kral NP02 .177 is the better of the two, the Rotex RM8 is not as consistent, & requires a lot of barrel cleaning, mine took 15 pulls in total to remove the protective grease from the barrel, the NP02 took two pulls on the barrel & performed immediately & has done since getting it, the .22 from my review is now for sale at Celtic Guns Bodmin, as I've traded it on towards another review rifle. Regards Jon 👍
Heyup Mark, sorry for delay getting back to you, Undo the big screw underneath the stock & remove it, there's a sprung threaded rod behind the trigger, undo the nut untill your happy with the travel on the first stage, if you go too far it won't cock, for the second stage there's a small hex screw under the trigger, very gently wind it in for your preference, it only needs small increments as it's very sensitive, if you're not sure check out Danny does things for a visual comparison, hope the info helps, cheers buddy, Jon 👍😁
Hello ddboxing, gen 2 has a different stock for better shouldering, improved magazine, & an improved valve, there may be other seal related improvements on seal seatings, the pellets are jsb heavy diablo 10.34 grn 4.52 mm, hope the info helps , Best Regards, Jon 👍