Krups EA8250 Flow Meter Repair If you have an expresso machine that leaks water over the counter, check this video out for a tutorial on how to repair the flow meter on a Krups EA8250 espresso machine.
Thank you for taking the time to film this! We just got the newer model of this and it's leaking water (2nd hand). I'm going to try take it apart and turn it on to spot the leak with the cover off.
For some position no need to open this apart.I used to limescale remover likidite detergant. I putted to likid tower channel 1 hours. I changed the likid twite. Problem solvent. Thanks Tom fix it.
thanks for the video, I have a simpler KRUPS (no LCD), but the internals are the same. same thing: the flow counter was leaky. fixed it with using epoxy (2 compound) glue.
Dear Fix It Tom, ı was have same machine and same problem. I took this part to outside and I put liqid imescale remover inside of 2 channels. I seen liqid come to other chnnel of this part. inside of 1 hour ı did this operation 2 or 3. I rinsed it. I was sure, liqid come from other channel. I rinsed more and more. "I didn't opened it". And in result, MAchine is working perfectly. Very thanks to you.
Thank you very much for this video. I have a problem (trying to repair it for someone else) that the machine always seem to be out of water. Somebody at our local repair cafe held a magnet against the machine, when it wasn't open and it working? Yet at the place where he held this magnet (I've opened it up now) there is only the little plastic holder where the water comes in and runs on one side to the floating meter and up on the other side. There is however a small electrical circuit attached to that plastic divider. Please sir, could you help me out? Thank you in advance and excuse my English.
Hi there. Any idea why my Krups ea80 sometimes suddenly grinds just like three seconds, then starts making coffee?? Then after dozen of coffees grinds a bit longer, then starts to finally grind normaly about 10 seconds or so.. thanks for thoughts.
My machine is stuck in the filling process but water comes out of the steam nozzle but that is it. Any tips to try to fix this? We have the machine taken apart.
Good evening, please help me with some advice. I opened and cleaned a Krups EA809810. After assembling, it went into "Put the 2 containers back" mode, although it has all the containers mounted. Probably the sensors don't feel like I've put them back ... how can I fix this.
Hi. Great video. I have a slightly different problem with the same model. Mine has started to leak coffee underneath the machine. So it operates as normal but have to keep wiping underneath the machine. Trying to determine where it is leaking from.
a few days ago from my krups coffee machine, during the heating phase, water comes out of the capuccino spout ... even if I only have to prepare the coffee! can it be a flowmeter problem? thank you