Тёмный

KS0-PRO ONE LARGE HEATSINK MOD 

Don’t Mind Me Mining
Подписаться 3,1 тыс.
Просмотров 2,2 тыс.
50% 1

KS0-PRO ONE LARGE HEATSINK MOD
NOTE: YOU CAN DAMAGE YOUR KS0PRO AND FIRE RISK WITH LOADING BARREL CONNECTORS AT MORE THEN 10AMP DO NOT OVERCKLOCK WITH BARRELL CONNECTOR & 12V PSU
YOU CAN CHECK LINKS FOR ALL ITEMS IN THIS VIDEO IN MY DISCORD CHANNEL, KS0PRO SHOPPING SECTION.
My Discord Channel:
/ discord
THIS VIDEO IS NOT SPONSORED AND THIS IS NOT A FINANCIAL ADVICE TO MINE, BUY OR SELL YOUR CRYPTO DO YOUR OWN RESEARCH
DISCOUNT CODES:
tangem.com/en/
10% discount code: D4C9K9
- Meter Box discount code 10% off! = ANDREY
www.themeterbox.com/r?id=gl5j6q
fruitiondesignsllc.com/collec...
USE discount code: GREATERGOOD
check GREATER GOOD MINING youtube channel:
/ @greatergoodmining
DOWNLOAD FREE ICERIVER MONITORING TOOL HERE:
t.me/swift_mining/2441
If interested in purchasing OC contact Tswift
Official Contacts:
Discord: tswiftz
Telegram: @TswiftUSA
FREE DOWNLOAD DEV FEE 0.5% FIRMWARE HERE:
t.me/swift_mining/3133
Thermal Imaging camera
TOPDON TC005 256 x 192 IR High Resolution Dual-Camera Thermal Imaging Camera with 12-Hour Battery Life and 2MP
amzn.to/3vn1UTV
Affiliate Amazon links for thermal glue, heatsinks and thermal paste. Thank you for your support.
Alphacool 17425 GPU RAM Copper Heatsinks 6,5x6,5mm
amzn.to/3TMJsOo
GENNEL G109 10gram Thermal Conductive Glue
amzn.to/47hJ3qB
ARCTIC MX-6 (8 g) - Ultimate Performance Thermal Paste
amzn.to/3NP831u
ARCTIC TP-3: Premium Performance Thermal Pad, 100 x 100 x 1.5 mm
amzn.to/3tHw7fL
JBtek All Black Sleeved PWM Fan Splitter Cable 1 to 2 Converter, 2 Pack
amzn.to/3NZ0LIs
Fancasee 4-Pin PWM Fan Power Supply Cable 1 to 10 Way Splitter Hub 4 Pin Molex Powered PC
amzn.to/3NZ0Mfu
3 Pin 4 Pin Fan Adapter PWM PC Chassis Cooling Fan Hub 8 Way Splitter DC12V Speed Controller with 6 Pin Power Port
amzn.to/3VGYAOm
or pcie to fan addapter
amzn.to/3IUvkw9
BUYMINERS.CA PWM Fan Splitter Extension Cable - 1 to 5 Computer Fan Splitter Cable Compatible with 3 & 4 Pin PC
amzn.to/3TZ9xKc
skineat 4-Pin PWM Fan Splitter Cable, 11.8" Sleeved Braided Adapter Computer PC Fan Power Extension Cable
amzn.to/3UhHia7
some parts I used to build my KS0-PRO rig:
Disclaimer:
please do your own research before using any of this hardware for voltage converter, it may as well effect or void your KS0/KS0 PRO warranty or damage the product, this video for entertainment purposes only.
Affiliate Amazon links for KS0 power supply, fan, fan temperature speed controller. Thank you for your support.
HP server PSU
amzn.to/3tbpFxl
Power supply board
amzn.to/489amEq
pcie power cables:
amzn.to/3t9q8QB
NOTE:
DO NOT USE THIS ADAPTER ON ABOVE 10amp LOADS
AAOTOKK DC 5.52.5mm to XT60 Adapter Cable Female XT60
amzn.to/3saIShJ
MCIGICM 10 Pair XT60H (XT60 Upgrade)
amzn.to/47HIlEc
OR
Onyehn 4 Pairs 150mm 12AWG Silicon Wire XT60H Plug Male and Female
amzn.to/45gTzy4
2Pcs No Wires Connector XT60 XT-60 Parallel Connector
amzn.to/45i6gsf
HTRC 150A High Precision RC Watt Meter
amzn.to/3QMEfoz
Glutoad 50 Pcs Lever Wire Connectors, 1 to 1 Inline Wire Connector Push-in
amzn.to/3KPKiVz
OTHER ITEMS FOR ICERIVER ASICs:
AC Infinity CLOUDLINE PRO T8, Quiet 8”
amzn.to/3GAbgOu
Power cord for KS3L:
amzn.to/3OCMjWa
Smart Home Energy Monitor with 16 50A Circuit Level Sensors
amzn.to/3qHTGU9
AC Infinity MULTIFAN S3, Quiet 120mm USB Fan
amzn.to/3qyKe5C
2 fans option - PWM Driver Module, DC 12V 24V
48V 2 Channel 4-Wire Fan Temperature
Controller Speed-
amzn.to/43QA7rd
230W Stealth Charger for MSI GS66 GS65 GS76 GS75 WS65 WS66 WS75 WS76, MSI Laptop Power Adapter Supply
amzn.to/3R4yC3w
Wathai 12038 120mm x 38mm PWM Computer PC Case Fan 12V 4pin 5300rpm High Airflow Duall Ball CFM FG DC Brushless Cooling Fan-
amzn.to/3poxQol
disclaimer:
This is not financial advice and I don’t recommend ordering this miner. This video is for entertainment purposes only. Do your own research.
ice river iceriver kso KSO ks0 MONITOR TOOL MONITORING TOOL Commemorative

Наука

Опубликовано:

 

29 апр 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 42   
@danielelninoerrante8203
@danielelninoerrante8203 2 месяца назад
Hi bro... I want to tell you something... I put my ks0 pro working inside the refrigerator...with tswift firmware...But unfortunately...it does not work with any oc...only work with the stock firmware
@DontMindMeMining
@DontMindMeMining 2 месяца назад
That’s a first time I heard of do you have a photo of your setup that you can share on my discord. That’s sounds crazy but I want to see. I’ve seen GPUs in the freezer before but the freezer was not able to keep up cooling it down.
@patrickdurbin6821
@patrickdurbin6821 2 месяца назад
@@DontMindMeMining ks0 pro bricked mine with tswifts 300gh/s + firmware I can only use his 280 and below. wierdly
@DontMindMeMining
@DontMindMeMining 2 месяца назад
Yes, latest batch ks0pros has this issue. I have 2 that do that not takes 3-4 times power reset before starts hashing, after that runs like a charm.
@danielelninoerrante8203
@danielelninoerrante8203 2 месяца назад
@@DontMindMeMining sorry...I just saw your message today
@danielelninoerrante8203
@danielelninoerrante8203 2 месяца назад
@@DontMindMeMining how is your discord ?
@MyLibertyTV
@MyLibertyTV 2 месяца назад
You can’t really know the temperature of the mosfets unless you use the pbfarmer firmware.
@DontMindMeMining
@DontMindMeMining 2 месяца назад
I need to try that pbfarmer firmware but I doubt it will help, thermal camera won’t lie. I have other ks0-pro with small heatsinks running 340GH and ambient temp 80-90. This unit is my unlucky so I call “bad” mosfet unit.
@danielelninoerrante8203
@danielelninoerrante8203 2 месяца назад
Hi... Where can I get pbfarmer firmaré please
@DontMindMeMining
@DontMindMeMining 2 месяца назад
​​⁠the links on the greater good miner discord I need to add to my discord as well.
@garajulluivalivalisgarage489
@garajulluivalivalisgarage489 2 месяца назад
You tried to implement my solution, but: my radiator is longer, the base is thinner and I have an air-conditioned room at 18 degrees Celsius. At 300GH they work perfectly, memory temperature 45-50 degrees. I too have done many tests and tried many updates and the conclusions are: 1. Radiators must have as large a surface as possible to dissipate heat as quickly as possible 2. better ventilation and (if possible) 3. air conditioning. My miners stay in a room of 1.5 x 2m and 18 degrees. And last but not least, 300 = +50% compared to the factory, I think it is enough to run stably for a long time. I told you that I will post a clip with my changes during the next cleaning, but since the room is airtight and very clean, this will take a little longer. Good luck!
@DontMindMeMining
@DontMindMeMining 2 месяца назад
Ambient temp is a gold, if I had a luxury to keep it in conditioned space would be no problem. It works great with ambient temps below 75F on 320GH and can probably get to 340GH with air temp below 65-70F. I have other units running 340GH and ambient temps 85-90 for over 3 month now with no issues and just 10x10 heatsinks this is a units with a “bad” mosfet I call
@garajulluivalivalisgarage489
@garajulluivalivalisgarage489 2 месяца назад
@@DontMindMeMining i don't want to risk over 300, this is my safety limit ! :) i use only rtx 3090 turbo for 3 years whitout service, memory temp @ max 80 and still work perfect ! Cool & clean !
@user-gd7ef9uc1v
@user-gd7ef9uc1v 2 месяца назад
@@DontMindMeMining did you grind down the 10x10 ones at the base or just put it over the mosfets with a bunch of thermal glue over other components near the mosfet? Also ur on 12v for those right?
@DontMindMeMining
@DontMindMeMining 2 месяца назад
Yeah agree, My 3080 and 3090 run non-stop in the attic with AC for over 2 years but keep them below 75C on memory and below 65C on core
@DontMindMeMining
@DontMindMeMining 2 месяца назад
First set 10x10 I grind the base down but then someone commented that used full base and worked fine with full base on all the rest of 6 ks0pros. Glue only on the mosfet (of course it come out on the sides a little when squeezed) but it’s not touching any other components.
@antonioguglielmi9029
@antonioguglielmi9029 Месяц назад
Thanks for sharing your experience! So after a month do you think it's worth it?
@DontMindMeMining
@DontMindMeMining Месяц назад
I don’t think it makes much difference to be honest unless you want to play around with any unstable slop pros but wouldn’t waste time. I have 3 more of these already cut sticks but I don’t want to do it on other machines.
@MrTA-nw7sg
@MrTA-nw7sg 2 месяца назад
10:13 Might the thermal paste that overflowed cause some heat issue to the components that it touches ?
@DontMindMeMining
@DontMindMeMining 2 месяца назад
Don’t think other component creating the heat besides mosfets. Ambient temp is a solution for “bad” mosfets
@MrTA-nw7sg
@MrTA-nw7sg 2 месяца назад
@@DontMindMeMining No I mean the mosfets heat would be led to other components :)
@DontMindMeMining
@DontMindMeMining 2 месяца назад
thats is true but the mosfets shut down before anything else can heat up.
@archadious
@archadious 2 месяца назад
And just a suggestion. But if you plan to show your browser in future videos you might wish to install an ad blocker.
@DontMindMeMining
@DontMindMeMining 2 месяца назад
Thanks. Moved to a new computer so everything just hazardous lol
@dorjenangwa
@dorjenangwa Месяц назад
Have you thought about planing down the base of that heat sink? I'd be gaming to mill down the base thickness even less then the little 6.5mm square you have
@DontMindMeMining
@DontMindMeMining Месяц назад
Imo base thickness doesn’t matter but I could be wrong.
@dorjenangwa
@dorjenangwa Месяц назад
@@DontMindMeMining I have to tear apart one of my KS0 towers to check on the well being of to of the boys. I'll mill 2 sets of 10s and glue them and see what the results are. They're having trouble staying on so I think I shall just solder 3 wires to the fuses to be sure their getting enough power (and THAT continuity is best).
@dorjenangwa
@dorjenangwa Месяц назад
@@DontMindMeMining Excuse me for asking, but didn't you find 19 volts is useless compared to 12 volts?
@DontMindMeMining
@DontMindMeMining Месяц назад
Running one ks0pro on 19v much better, but for 10 I figure 12v setup is much more convenient considering I already have server psu available and don’t have to buy 19v PSUs for my setup.
@dorjenangwa
@dorjenangwa Месяц назад
@@DontMindMeMining What caused you to find using 19v on that one?
@archadious
@archadious 2 месяца назад
To be clear. Did you only give the thermal glue 4 hours to set?
@DontMindMeMining
@DontMindMeMining 2 месяца назад
12 hours
@DontMindMeMining
@DontMindMeMining 2 месяца назад
I think minimal 4 hours
@user-gd7ef9uc1v
@user-gd7ef9uc1v 2 месяца назад
Wrong firmware to know mosfet temps no?
@DontMindMeMining
@DontMindMeMining 2 месяца назад
I’m not using pbfarmer firmware to see correct mosfet temp but thermal camera will not lie.
@Dilut2d
@Dilut2d 2 месяца назад
think you can mod an avalon nano 3?
@DontMindMeMining
@DontMindMeMining 2 месяца назад
If there is hot spots that can be better cooled pretty sure it’s possible not sure though since I haven’t used Avalon nano 3
Далее
ПОЛЕЗНЫЕ ЛАЙФХАКИ В PLANTS VS ZOMBIES!
00:45
Maybe i need to add instructions @popflexactive
00:14
Ranking The Most Painful Crashes
00:19
Просмотров 3,9 млн
Damascus Steel From Milling Chips!
15:47
Просмотров 764 тыс.
USB-C powered KS0 Ultra. Will it burn up?
11:44
Просмотров 1,1 тыс.
Razer's new keyboard is basically cheating.
7:42
Просмотров 2,4 млн
KS0 Pro Barrel Jack Repair #mining
11:35
Просмотров 1,2 тыс.
Decent Low Cost Bench Power Supply • 30v 10a 300w
38:15
Where Did Arch Linux Come From?
16:21
Просмотров 30 тыс.
I Built a Sun Tracking Solar Charger
14:15
Просмотров 79 тыс.
APPLE дают это нам БЕСПЛАТНО!
1:01
Просмотров 731 тыс.