KTM 390 Adventure: SRC Accessories Install - Crash Bars | Rear Rack | Headlight Guard 

Looking like a proper weapon now, nice spannering Nat 👍. Glad Poindexter was there for a bit , he's a knowledgeable fella to have around.

Great job Nat and Josh

I agree with you guys total, SRC stuff is well made & fits perfectly plus the service from Tony is Top Notch. I'm still waiting for it to stop bloody raining here in Vic it's been three weeks now & the bike still has only 1km on it, it will stop one day. Enjoy!

We shoulda waiting just a little longer. That headlight guard looks way better than the one we went with🤙

Nice vid, always great when parts for your bikes arrive. Great seeing Nat back on the tools.

WOW... that's the best looking KTM ever Nat! Really love that rear rack too... Looks bloody Awesome. Well done guys or should I say Bloody Ripper Job! Cheers... Mark

Good stuff I like the way you put the lock tight on the right end of bolts not like some other you tubers

That is some super great quality products,very impressive and looked nice and easy to fit . Well done guys 👍🇦🇺

Hello Josh and Nat, so good to see the Vid on how to put all the sexy gear on the bike, well done Nat on the tools, all good fun. Enjoy! David...Adelaide SA Tiger 900GT...

Time to go test it out Nat .looking good 👍🏻👍🏻

That torque wrench was hilarious haha, cripes!

Looks awesome guys, great job 👏. Regards, Dazza. 🇬🇧

Nice, all that gear looks rock solid, really like the rack with the grab handles!

When you tension something, just make a click noise…. Works for me…. Or tighten until it strips then back it off a turn 😂😂🍻

Being the Anal Torque wrench guy that I am, I was very impressed with your settings and the Torque wrench tool that you both use. Another top instructional video, and great to see the accessories for the 390.😀💀👍

I went with the AXP rear rack after seeing it in your channel. It definitely has some flex to it, but works for me since it has more areas to strap on to. The slots on the side are well spaced and don't slip backwards or forwards with my net thing on them as they would with this rack or the stock hand rails since nothing is holding them fore or aft.

Such a sweet looking bike luv it 🤟🍺

That rack is a quality piece of kit!

Pfft you don't need a torque wrench when you've got T bar spanners . That little 390 is the shizzle solid effort guys . 👍

Just purchased a bunch of parts for my CRF300L that still hasn't shown up yet :') Cheers for the code guys, saved me the cost of shipping pretty much! Uploaded my little box of goodies!

After watching your video I just got the src rear rack and crash bars. Can say one thing its easier to fit the crash bars if you have a 2nd set of hands.

Love the channel guys, took Mark's recomendation from Biker Bits! Great stuff!

Awesome guys. 390 Looking the goods Nat 👌

Beefy looking crash bars and rear rack. Looks like some good quality solid gear and the side stand bigger foot things are really handy too. Shame they don't make anything to suit my 1090

Nat's racks are looking good. Lol. Good job guys the bike is awesome.

Hey guy's...nice gear you got from SRCMoto, and I hate to be picky, but not too impressed with the 4 bolts that hold the main rack to the frame :(...would have been nice if they were flush with the rack, instead of sticking up a few mm.

top notch job guys, looking great and functional

Nice job. I got to get that kick stand large foot print, always worried about falling over in dirt.

that is some tight gear from SRC Adventure Moto eh! big beefy grab handles on the rack and those crash bars, sweet dealio! nice edit brother, dig the tunes picked for the slow mo sexy b roll eh, B^D thanks for sharing your time and expertise with us all, wherever you may be brothers and sisters, here is to the day smiling kindly upon us all eh, see yous next fuckin' video! B^)

That looked like a bit of work for the crash bars but good protection, Ktm’s looking good 😜👍🤘🏻piece of resistance 😂

These crash bars look the best ive seen. I havnt got my bike tet but these items are hot on the list. Have subbed you guys as loving your vids. And that your in Oz as well.

The design looks inspired by Zana Crash Bars for KTM adv390 from India.

Great 👍 job Josh and Nat , that was a good torque wrench 🔧😂😂😂. I’m the same never 👎 one ☝️ my brother in law ALWAYS does for just about every bolt - painful 😖 to watch 😂. He is heavy handed he wreckens . I’m installing new crash 💥 bars today ( SM- Motech ) for my Yamaha 660.

I love you guys....👍👍👍👍

Nice job. Off topic question when you replaced the 10 lbs of muffler with a short mid pipe to connect exhaust together did that have much effect on bike performance??

Have added up what the cost to build the 390 to this stage would be, bet its scary, might be worth a video on both bikes 🤔

✌

I was sitting here feel in sorry for me self started watchin you meddilin with the 390, and I thought "fuck it get yer act together ya wussy" (I had a tripple by pass 3 weeks ago) and one week ago I dived on a 21 tenere "like hens teeth over here (Ireland) so me bark busters came today and cross brace for the bar's so off I went to the cave and fitted the lot, not that easy when yer waitin on yer chest ta crack open again, but I got it done, ya gave me the get up and go to attack, and lucky for me when I ordered the stickers off ya,s I ordered two sets so now I have the only T7 in Ireland with mvdbr stickers ( woo hoo) took a few pics but can't put them up here ?. Keep up the good work love the bikes and yer sence of humour not feel in sorry for me self any more. (Ps the names Christy last time ya thought I was a girl) have a good one Josh/ natt) I'll stick up a few pic for ya,s when I figure out how even the gory hospital one's all I have ta do is wait another 3 weeks before they,'ll let me drive the T7, good luck "and may the wind at yer back always be yer own" Christy (male)🤒

Hey guys! Would you say the Ktm original crash bar is enough for your style of riding if you didn’t get the beefy upgrade of crash bars? Or would you throw money into a new set of beefy crash bar and remove the original ones? Thanks!

Again just watched you on the big screen .your both great .I installed SRC stainless crash bars on my 22 T7 and Wednesday put the SRC rear rack yes it looks great pretty simple to install and Nats bike looks awesome and one thing you did mention the little joint pipes that go in there yes I noticed those little 4 mm button Head Allen's not very deep for the Allen wrench I left mine in but I will put stainless Allen heads in mine when I take them off or if I have to and know have the Kriega 9 back pack. Awesome. !

Good video, a bit of protection is always a good thing 😁 I'm going crazy protecting the 790, with upper and lower protections but a lower one has come to me wrong and I've spent many hours to not be able to mount it, let's see if they solve it although they are taking it too slowly 😩

Hey Nat, that headlight protector makes the ugly KTM headlight look OK!!!

Haha, the unwrapping probably took longer than the installation. Good gear.

Dont make my mistake, as you will end up losing that sidestand foot like I did. Put some RED loctite on those bolts even though they are probably nylon lock nuts, as I had blue loctite on mine and they still came undone on a long ride and i then had to buy another replacement foot. I made sure I used Red the second time around.

What mirrors are you running on the KTM 390?

Great video guys, can you tell me which radiator guard you have fitted to the 390 with thoses SRC crash bars please

Hey Guys Love your work - quick question - did the crash bars create any vibrations or change the dynamics of the engine

The crash guard will make a perfect place to mount nitrous oxide bottles. One on each side. I've never seen a KTM 390 Adventure with nitrous. Yours could be the first on earth!

if your doing your own filming it becomes a 5 beer job

Блин, очень много пересмотрел разных видосов на разных каналах и вы одни из немногих, где на всех видео стоит 2-3% дизлайков. Я нифига не понимаю, что вы говорите, но мне чертовски приятен ваш контент.

Are you just testing that rear rack? Doesn't look like it is currently offered by SRC

Sweeet :)

Great video again! I have 1 question. I own a 390 adv and i am 192cm tall. If i put the 1 piece ergo seat do i have to rise thw handlebar? I use the bike mostly on the road. Thanks a lot for your time!

Looks like you might be running an AXP Racing skid plate... i wasn't aware they made one for the 390. Did you retrofit/ was it meant for another bike, or does AXP offer that now?

More Beer she'll get the kick stand Pad

What seat are you guys running here? Thanks

Nice video and workshop. But a bench grinder on top of your workbench? Near the bike and clean workbench, seems not very well thought in my opinion? Bench grinder should never be in a clean workshop, possibly contaminating your nice and clean work. Besides that after using this bench grinder, cleaning consumes precious KTM driving time for NAT. And what about respiratory dust?

Love your content guys. What audio recording mic do you use that you had recording with your phones?

What strength thread lock did you use for the top rack and stand ?

How's prices on engine and suspension parts

Always drinking