Kyocera P2235dn, M2040dn paper jam. Fuser repair. 

Great Video and Works well so far, cannot believe this but the felt pad is such a stupid idea as I have been working on kyocera for over 20 years and this is the only machine which has caused endless problems as I have been only getting between 30 to 50k prints until it burns up... or starts jamming or giving repeated images etc. I used the HP G300 Grease and yes there was a little smoke for about the first 5 or 6 prints and also had a little smell for the first 20 prints or so but that was ok as I was still testing the fuser. Only printed a few hundred and all is OK. I now have 5 refurbished fuser units using this method and only time will tell buy I am very optimistic on this one. I have been a copier technician for 42 years and this method seems very positive to me as I have worked on toshiba, canon, kyocera, xerox, brother, Hp. etc in my past 42 years. Thanks. Tommy Raleigh.

Brilliant hack! Very helpful. Done it on ECOSYS M2640idw. I use generic "Fuser Grease" available in India. Thank you so much!

Great video and guide. I had no problems during disassembly and assembly, although I was afraid of it. :)

Tried this method on Kyocera M2540 Fuser...using HP Fuser Grease, it actually works!!! Thank you for sharing this video!

Nice and very composed job

Great Video and Works well

he intentado reparar dos veces un fusor de Kyocera mod P2040dn, cambiándole cada vez la tela (dos modelos diferentes) y engrasando estas camisas con grasa especifica para fusores, de alta temperatura, en la segunda ocasión utilice aceite de silicona liquido (dos jeringas) y en ambas ocasiones que realice esta reparación, funciono, pero solo duro unas 4 o cinco semanas de uso, volveré a realizar este tipo de reparación, en esta ocasión sin la manta y engrasando con aceite liquido de silicona, pero estoy convencido que este tipo de fusor yocera es una "gran mierda"

Saludos desde Colombia, gracias por compartir tu experiencia.

What care is needed when using this method?

Sir thnks for vedeo So we can get out the "tapis "and continu working without it ?

Thank you

i thank you so much

Thanks for your video

thanks for the video!

give the guy who stood over your shoulder for 30 mins a pat on the back from me

hola buen dia podrdrias orientar tengo una kiosera M2040dn/L EL fusor se patina a mitad de hoja este metodo de kitar la telilla usando la grasa hp gp 300 desde tepic nayarit mexico xfa gracias

Nice video sir

thanks

Hi, thanks for the video. I cannot find the grease in-store in Australia so can I use Kincrome 500g Hi-Temperature Grease ? OR can i get the Fuser Film Sleeve Grease Synthetic Grease PRINTER COPIER GEAR Lubricating Oil from ebay ?

Sir hamare kyocera p2235dn me print horaha hai par kahi kahi pe white line ke sath light print ho raha hai. Btaiye kya issu hoga.

very helppul

Does the same issue with the fixing film also occur on Kyocera P5021CDN & P5026CDN models.

removing that pad after that applying only lubrication can it works without pad

que liquido es el que le pones. y por que no vuelve a poner ese recubrimiento???

Una consulta ese liquido que aplican , por que otro liquido lo puedo sustiruir??

Hello, I have already repaired the fuser with the HP grease, and the pages get stuck, but every time I print some smoke comes out of the fuser, do you know what it is due to?

I have a P2040DN, Paper jams when printing and if it does print the print quality is low. Smudges. Does this procedure fix that?

I have a M2540 and keeps jamming the paper everytime.. is the fuser the one causing it to jam? In your video you put grease on the fuser, I have an extra fuser can I just use it to replace instead of applying the grease?

Any idea how long this will last? Or do you lubricate it after some time/prints again? Thanks, I'll try it anyway, just curious about how long it lasts without the sheet.

Is the G-300 Fuser Grease the same? I tried this is it smells like something cooking.

Will CK-0551-020 Original Grease G No.2 For HP LaserJet 20g work for this printer?

Sounds comes from fixing while printing (like gears upset... Thak thak) in M2040 quocera... Some time paper stuck... What will be the possible reason please suggest...

i've got error C6200 on my kyocera m2040dn, can you help me ?

Hello, thanks for the video, could you tell me why after changing the fuser cylinder and the sheet, when I print I get the text repeated, thank you very much

Anyone have place to buy the FFL ELECTROLUBE grease as can not source in Australia. Have sold number of these machines.

Wooo eso no daña el fusor?

After this, I got Pepar Jammed in front cover problem

hai sir how fuser lamp wire replace

Oil pad necessary or not For poor quality issue. Why you are not using oil pad. Comment me.

Sir can we use fuser oil to lubricate the fuser film ?

I couldn't find where to buy Electrolube FFL in the UK and I asked manufacturers directly and they said that this product is discontinued. Can someone suggest any good alternative. Prefer that company which is selling would be from UK or Europe.

From where did you buy the fuser film?

without sleeve..??

Where can we buy FFL ELECTROLUBE from or what can we buy?

What kind of lubricant did you use, sir?

kyocera m2040dn eror c6020?

Acudo a la llamada de mi cliente, y su máquina Kyocera P2040dn al encenderla da un codigo de ERROR 6600:0066424 ¿alguien sabe de que problema se trata?

no fuser film?

Great 👍👍👍

Same problem aa rahi hai ab bhi

Electrolube grease is no longer made what other grease you using HP grease is no good as the fuser are different to Kyocera & Brother printers

Pls try to explain

Has anyone other than the author already tried this method?

You can't add fixing film pad