Laguna Tools DriftMaster Fence Installation Guide

Подписаться 45 тыс.

Просмотров 3,3 тыс.

50% 1

Upgrade your bandsaw experience with the Laguna DriftMaster DX3 Fence, designed for precise resawing and woodworking. Featuring a robust Linear Motion Guide System and Precision Handwheel, it ensures unparalleled accuracy in every cut. With its tool-free micro adjustment knob, setting the fence drift becomes effortless. Follow our step-by-step guide to unlock the full potential of your bandsaw and elevate your woodworking projects. Subscribe for more tips on optimizing your woodworking setup!
►Explore the DriftMaster DX3: bit.ly/49SZk6s
►Subscribe now: bit.ly/2r5Czgc
►Instagram: bit.ly/2mph6wt
►Facebook: bit.ly/2qiHpXi

Наука

Опубликовано:

30 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@Rich32262 Месяц назад

I looked at about six set up videos before I found this one to adjust the fence square to my table. Thanks for taking the time, this was top shelf.

@tonygomez-jk9to 2 месяца назад

Your instructional video is very detailed, i like that you get straight to the point and don't babble. I installed mine last week on my mini-max 45s. The instructions on how to eliminate drift with this fence is awesome, drift has been one of my achilles heels, well done by you and Laguna.

@dutchwalters4450 Месяц назад

Installed mine last week, did not notice the perpendicular adjustment screws in the manual - fixed the one minor area that needed help. Thanks

@jstabiley 2 месяца назад

Thank you for the in-depth video. Your explanations and demonstrations are spot-on and were very helpful (easier than reading the manual). Just installed mine on the 18BX and the fence works perfectly (no slop). This DX3 fence is nicer/better than the one that came with the 18BX bandsaw. One 360 degree turn on the handle is 1/4", so easy to get 1/8" veneer pieces off the bandsaw.

@UndertheWaterDesign 3 месяца назад

Looks pretty awesome!!

@CalyoWiselyLaser 10 дней назад

Looks really nice!

@user-sm4ew3hr1y 2 месяца назад

dont know if its an issue, helps or isnt necessary but id make the stop flip down so you can have it out of the way and flip it back up if needed

@NV..V 3 месяца назад

Love mine.

@josephKEOarthur 2 месяца назад

I notice you have holes (dust vent?suction/vacume?) on the bandsaw base. (is this mainly mdf or is that an abs plastic or teflon?) (multiple holes wher the bandsaw blade goes in for the cut)

@josephKEOarthur 2 месяца назад

On the LT-18 i notice the baseplate is different. I have the Laguna 14BX (220v) bandsaw. . the one with the blue ceramic guards.. can i change it out for the black version on the LT-18?>

@LagunaTools 2 месяца назад

Thank you for your question on the bandsaw throat plate inserts. Your 14B|X Bandsaw uses the blue anodized aluminum throat plate insert. This insert has built-in leveling screws and a center screw to secure the insert to the table after leveling. The large, oblong center hole provides clearance to draw the sawdust down through this slot for collection by the dust ports below. This insert fits the 14|12, 14|BX, 14|CX, 18|BX, and 18|CX bandsaws. You can find replacement inserts at www.shop.lagunatools.com/Table-Insert-for-14-12-110-VOLT-BANDSAW. The square black insert that you saw in the video fits our Industrial Series Bandsaws. This insert is much thicker than the insert for your 14|BX and will not fit your saw. This is made from a durable, industrial-grade plastic and features the holes beside the blade slot. These holes assist in dust management for the Industrial Series saws. You can see this insert at www.shop.lagunatools.com/Throatplate-Italian-16HD-37

@jonathanh2096 3 месяца назад

Just got mine, and it’s great. Though there’s a lot of slop in the wheel, and a lot of play before it engages the rack. What’s the best way to tighten this up? Thanks for the great in-depth video, & looking forward to hearing your thoughts!

@TreeOfLifeWoodworking 3 месяца назад

uh oh... not excited to hear that. mine arrives tomorrow. im relying on this being accurate

@NV..V 3 месяца назад

I think he's talking about the drift wheel not the main "left to right" wheel. Mine has NO slop / play whatsoever. Super tight.

@jonathanh2096 3 месяца назад

@@NV..V No, I mean the main left-and-right wheel. But I’m glad to hear yours is ok. I have a call in to Laguna, and will report back!

@NV..V 3 месяца назад

@@jonathanh2096 Ugh Understood my friend. My apologies. I hope they make it right ASAP.

@NV..V 3 месяца назад

Did they ever help you fix it?

@edwardk7217 Месяц назад

In the video he mentions that this will fit larger saws, 24" and beyond. However, the tech support reps can only repeat what the sales material says.....up to 18" What's the real deal? I have a larger LT24 saw and wondering if this would work on it. It would appear to be fine, but wondering why Laguna says.....no (at least on paper)

@LagunaTools 27 дней назад

Thank you for your question on the new Laguna DX3 DriftMaster fence system. The short answer is yes, it will fit your saw since it has a universal mounting bracket. The mounting bracket is designed to fit a wide range of saws to make it easy to fit saws like yours. We have a version of this fence coming out soon that has all of the same features, but it has a slightly longer mounting rail and mounting bracket as well as a longer fence extrusion. This version will end up being the best fit for your saw. It is specifically designed for 24" and larger saws. Keep an eye out for it on our website. The standard fence on the DX3 is 23" long with a 31" front rail. The larger version will have a 27" fence and a 37" front rail.

@tachikawa6013 2 месяца назад

I have a Laguna jointer and I hate it. also BE WARNED THEIR LAGUNA CUSTOMER SERVICE IS GOD AWFUL.

@LagunaTools 2 месяца назад

Hi, we're sorry to hear about your experience with your Laguna jointer and our customer service. Please reach out to us directly at customer_service@lagunatools.com with any details and concerns so we can address your issues. Thank you for bringing this to our attention.