Land Rover 2.25 Petrol STILL Won't Start 

Thanks for the videos, I’m in the same process of getting my 2.25 to start

Thanks for posting. Hope you get it sorted.🤞

Have you checked the timing?? Just a thought. Full marks for effort though!! All the best.

Line up the timing mark and then check rotor position of distributor that it on the 1st cylinder lead

Is the toilet roll between the seats for when you come to test the brakes? (speaking as a Series 2a owner!) 😂

Is the distributor definitely seated correctly and engaged? I had a similar issue on my Series 2A - it turned out I had the wrong distributor base plate for my engine - there's a taller one and shorter one, so even though the distributor was bolted down, it wasn't actually engaging the drive gear below, and the engine wouldn't fire.

Keep at it buddy, I think that was a replacement Distrubuter ? checks its not 180 degrees out and as your doing be methodical

Plugs didn't look wet maybe worth checking carb hasn't got a blocked jet

It looks like you connected the spark plug wires incorrectly

Is the timing right? Try rotating the distributor slightly to see if the spark is happening at the right time

The fuel can needs to be higher up

Have you checked compression? I’d say timing is out

Did you get it running?