Land Rover Series 2A 1968 Front Oil Seal Distance Piece Removal From Stub Axle.

Подписаться 160

Просмотров 9 тыс.

50% 1

Hi I often hear that people are not confident to remove the stub axle distance piece as the instructions are to remove it with a cold chisel and hammer. The video shows the removal of the distance piece after a hub seal oil leak on a SWB 1968 Series 2A Land Rover. Anyway hope this gives you the confidence to have a go!

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 3

@choda42 8 лет назад

Hello, I have the same issue on my 65' S2 but on the rear. Does the new distance piece go back on easy or do I need to press it on? The old one is only slightly worn but I have it all pulled apart and figure I should replace it.

@AllotmentHolder 8 лет назад

+choda42 Yes they should if you warm them up a little just push / tap on gently you can use the big bearing spanner to tap them on flush LAND ROVER WHEEL BEARING HUB SPANNER 606435- check its the correct way there s a bevel lip on the inside edge Even if it is slightly worn that can still be enough to leak at the seal if you have it apart it is a good time to change it.

@choda42 8 лет назад

Makes sense to change it now. Just have to wait for the parts to ship from the UK. Thanks.