Тёмный

Largest Screw Compressor Manufacturing, Assembly & Repair Process. Incredible Efficient Compressor 

X-Machines
Подписаться 343 тыс.
Просмотров 418 тыс.
50% 1

Largest Screw Compressor Manufacturing, Assembly & Repair Process. Incredible Efficient Compressor
Chapter:
0:07. Screw Compressor Manufacturing Process
3:12. Largest Screw Compressor Assembly Process
3:51. The smallest and lightest compressor in the market
8:01. Howden Screw Compressor Repair
-------------------------
Credit:
PTG Holroyd
www.holroyd.com/
GEA Group
www.gea.com/
Howden
www.howden.com/
MAN Energy Solutions
www.man-es.com/
turbomachinery.man.eu
SCS Screw Compressor Specialist
www.screwcompressorsspecialis...
Coastal Plating Company
www.coastalplatinginc.com/
Hussain Saheb Shaik & 6tibbar
-------------------------------------
X-Machines Channel
Website: www.xmachines-co.com/
Fanpage: / x-machines-10949018502...
SUBSCRIBE: bit.ly/3e8Hz7t
We would like to support all companies or people to promote their products, service, or company. If you need our support, don't hesitate to contact us via email wowtv2050@gmail.com.
If you are a copyright video owner and don't want us to use it in this video, please contact us via email wowtv2050@gmail.com. We make sure to remove your video immediately.
Thanks for your co-operation.
-------------------------------------
Disclaimer: X-Machines is not affiliated with the businesses whose products are shown in this review. Any trademarks depicted are the property of their respective owners.
---------------------------------
⚠️ Copyright Disclaimers
• We use images and content by the RU-vid Fair Use copyright guidelines
• Section 107 of the U.S. Copyright Act states: “Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, including such use by reproduction in copies or phonorecords or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for classroom use), scholarship, or research, is not an infringement of copyright.”
• This video could contain certain copyrighted video clips, pictures, or photographs that were not specifically authorized to be used by the copyright holder(s), but which we believe in good faith are protected by federal law and the fair use doctrine for one or more of the reasons noted above.

Наука

Опубликовано:

 

25 ноя 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 74   
@jiggsborah7041
@jiggsborah7041 5 месяцев назад
I used to work on contract at a large refining facility that used gasifiers and gas to liquid technology to make a vast array of products like petrol diesel jet fuel etc. The gasifiers burnt coal to produce gas that was pushed through a circuit by two trains of large screw compressors. I used to overhaul and prepare these units for the two yearly shutdowns. Ir's a very exacting assembly process . Clearances are critical. The "suicide" clearance on the rotors was a headache. It has to rather break or shear just behind the gear rather than destroy the casing and it could take more than a week to get right. We used 3 compressors in series to push the gas , each stage being smaller than the previous one with an increase in revs.
@ChefKevinRiese
@ChefKevinRiese Год назад
That is crazy precision!
@le260440
@le260440 Год назад
Wat een techniek geweldig!!!!!!!
@Kocur_z_ur
@Kocur_z_ur Год назад
Great machines!
@Bianchi77
@Bianchi77 Год назад
Nice video, thanks :)
@joejohnson-ne2sg
@joejohnson-ne2sg Год назад
impressive quality
@toddburgess5056
@toddburgess5056 Год назад
Smoooooth like butter
@kimienick6721
@kimienick6721 Год назад
Hahaha it's like eating burger with Soda 🤣🤣🤣
@markmilam3152
@markmilam3152 Год назад
Beautiful machining!
@mahendrakumarpatel6237
@mahendrakumarpatel6237 Год назад
q
@SweetBabyRey
@SweetBabyRey Год назад
I wish I had these skills
@NaimRack
@NaimRack Год назад
15:53 las espirales no deberían entrarlas en horizontal, deberían de colocarles en vertical evitando tocar las paredes pues estas paredes están milimétricamente cerca de aspeas en espiral. Es según mi entendimiento. ¡Saludos desde República Dominicana.
@ucuy3706
@ucuy3706 Год назад
Quá chất
@victorfamilia9795
@victorfamilia9795 Год назад
Good 👍😊
@muhammadjalalkhan3909
@muhammadjalalkhan3909 Месяц назад
Great manufacturing
@user-hm3el7io6j
@user-hm3el7io6j Год назад
Best job in the world.
@jiggsborah7041
@jiggsborah7041 5 месяцев назад
It is very satisfying and pays very well but carries a huge burden of responsibility
@coldlight9776
@coldlight9776 Год назад
Шнековый компрессор это очень мощный агрегат 🙏🤗👌👍
@ah-hr1ps
@ah-hr1ps Год назад
کالا موتورز افغانستان ،عالی
@vincentrobinette1507
@vincentrobinette1507 Год назад
I would put the compressor housing on end, rather than on its side, to load in the lobe and trough rotors in that last image. If the rotors were lowered in axially, that would reduce possibility of scoring the housing or rotor edges.
@NFlight
@NFlight Год назад
Why aren't you there running the show?
@jiggsborah7041
@jiggsborah7041 5 месяцев назад
We loaded them in vertically to avoid scuffing
@user-qd1ri4xc6y
@user-qd1ri4xc6y Год назад
جيد
@automobidletechnician3387
@automobidletechnician3387 Год назад
good 🌹🌹
@leisuretime4341
@leisuretime4341 Год назад
what brand blower is this
@zahidumer4455
@zahidumer4455 Год назад
this compressor we are using in kemia olifeen plant in ksa jubail
@4dirt2racer0
@4dirt2racer0 Год назад
does anybody know what were they doing between 10:26 and 11:18?? some kind of coating i assume but what??
@paul5683
@paul5683 Год назад
They were adding hard chromium plating. In the next video, they were showing it being precision ground back to the appropriate size. If a bearing gets spun or the part is accidentally made too small, they can put that hard chrome on and fix the part. They can build it up by a few thousands of an inch. Which is all you need sometimes.
@4dirt2racer0
@4dirt2racer0 Год назад
@@paul5683 ooo interesting im goin to watch that again now knowing that, i havent got the next video yet thats interesting i grew up in a machine shop n iv actually never heard of that specific kind of additive process yea for sure a few thousands would b plenty sometimes by the way thanks for the reply man i appreciate that
@ghffrsfygdhfjkjiysdz
@ghffrsfygdhfjkjiysdz 10 месяцев назад
If i was Elon Musk or Bill Gates, I'd totally have one of these compressors in my garage, hooked up to the harbor freight sand blasting cabinet. Can you imagine blasting at ~15,000cfm?
@BLUELEADER78
@BLUELEADER78 Год назад
I'm not proud of this but it too me entirely too long to realize there is a person next to the compressor.
@Vlad22051969
@Vlad22051969 Год назад
Нихуахуа!
@drewscruis
@drewscruis Год назад
kinda dumb to check for cracks after you machined it. would have done it before and after.
@kimienick6721
@kimienick6721 Год назад
Using pin key on turbine blade fan is good but more better if use bolt pin (half and half)
@markmilam3152
@markmilam3152 Год назад
Do you mean shoulder bolt?
@user-vd6xy1vw4k
@user-vd6xy1vw4k Год назад
уж гораздо надёжнее было бы сделать одновинтовой компрессор с большими лопастями. это было бы надёжнее и не надо было иметь огромный масляный бак для охлаждения трущихся винтов
@user-uq8ux7nf7s
@user-uq8ux7nf7s Год назад
Я бы не сказал, что необходимо огромный бак с маслом, к примеру, компрессор на 55 кВт имеет масленый бак на 18 литров. Да и люди не дураки, если бы была возможность - давно бы сделали, а это значит бесперспективно.
@Vlad22051969
@Vlad22051969 Год назад
@@user-uq8ux7nf7s Это маркетинг. Нужно сделать так чтобы к тебе обращались за ремонтом и запчастями.
@user-uq8ux7nf7s
@user-uq8ux7nf7s Год назад
@@Vlad22051969 в этом есть правда, согласен, знаю не понаслышке, работаю с электрикой и электроникой в промышленности, ремонтопригодность многих узлов никакая.
@4dirt2racer0
@4dirt2racer0 Год назад
why did he spray the dye on then wipe it right back off?? was that not dye??
@mrcamelpmw
@mrcamelpmw Год назад
it's a crack checking fluid, the red fluid is sprayed on then wiped off, the second spray will show if the red dye has penetrated into a crack, the red will then show through as a line following any crack.
@user-dr6zl7le3o
@user-dr6zl7le3o 8 месяцев назад
compressor olil Filter video
@user-vd6xy1vw4k
@user-vd6xy1vw4k Год назад
компрессор 6 ВВ 32 это беда советского подводного флота.
@Onwise_sales04
@Onwise_sales04 Месяц назад
👍
@pinterelectric
@pinterelectric Год назад
You don’t want to screw one of those up!
@raymondstone9636
@raymondstone9636 Год назад
50 years ago if you so much as put an abrasive cloth to your machined product you would have been told not to come back. How times change.
@UQRXD
@UQRXD Год назад
In the old days you would have to file that thing by hand and took a year to make. Just kidding.
@frosthoe
@frosthoe Год назад
Your correct! But it was called hand scraping, and you use a flat tool to literally shave tiny strips of steel off by hand. look up "machine tool, the art and science scraping ways. If interested in old school precision hand shaping.
@jiggsborah7041
@jiggsborah7041 5 месяцев назад
😂🤣😆
@user-vd6xy1vw4k
@user-vd6xy1vw4k Год назад
одновинтовые компрессоры в тысячу раз надёжнее и потребляют мало энергии , но их производительность меньше.
@user-vd6xy1vw4k
@user-vd6xy1vw4k Год назад
из за таких советских компрессоров много подводных лодок утонуло . не сумев продуть балласт всплытия.
@wickedcabinboy
@wickedcabinboy Год назад
16 minute advertisement.
@kimienick6721
@kimienick6721 Год назад
Its easy if have all item☺☺
@hernancurletto8480
@hernancurletto8480 Год назад
there is plenty of space for fuckup's even with the best equipment
@kimienick6721
@kimienick6721 Год назад
@@hernancurletto8480 if you mastered Quantum MECHANIC it's pretty easier to... And if you also MASTERED Mechanical engineering and Hydraulic system it's like eating burger with Soda!!!! Perfect combination
@chimpo131
@chimpo131 Год назад
@@kimienick6721? dumchnk
@kimienick6721
@kimienick6721 Год назад
@@chimpo131 dumchn??? Not understand..... Not have in books
@reyigo69
@reyigo69 Год назад
No oops
@mkngani4718
@mkngani4718 Год назад
Aaena maerieral.
@longtran8744
@longtran8744 Год назад
😆🤩❤👍👍👍
@ForestWoodworks
@ForestWoodworks Год назад
I would not mind narration on this type of video because reading the captions distracts from the manufacturing process. Great content tho frfr.
@kimienick6721
@kimienick6721 Год назад
Only in asia still welding and cutting 😅 other just use the Master's degree experience 😅they thinking it's like changing the new SET bearings all will bile fine without see the AIR, HYDRAULIC and PRESSURE measurements 🐼🐼🐼😝😝😝
@nickbooboo4528
@nickbooboo4528 Год назад
5
@kimienick6721
@kimienick6721 Год назад
The new mixed OIL made it's more perfect for the polished area and it very important for the GAUGE SYSTEM and made a perfect Control on PISTON AREA, talk about PISTON trust me alot person repair this not have IDEA about it 😝😝😝 it's NUMBER 1 IMPORTANT on tunning effects
@kasunnanayakkara793
@kasunnanayakkara793 Год назад
Incomplete documentary. 🙄
@gren509
@gren509 Год назад
A LOT of this made me cringe ! Some very lax methods used. This must be from a 3rd world country.
@user-vd6xy1vw4k
@user-vd6xy1vw4k Год назад
это очень плохой компрессор. такой стоял в подводных лодках СССР. .6вв-32. главная недоработка это трущиеся друг о друга винты компрессора . на их усилие тратится огромная мощ. и эти винты свои трением разогревают масло до очень высоких температур.. самый плохой компрессор. только размер маленький.
@user-bu3tk5lc5n
@user-bu3tk5lc5n Год назад
А в Пакистане сваркой заляпуют болгаркой обточат и пойдёт!
@user-vd6xy1vw4k
@user-vd6xy1vw4k Год назад
для этого компрессора нужна почти тонна охлаждающего масла и огромный радиатор охлаждения этого масла да ещё огромный маслоотделитель чтоб воздух насыщенный грячим маслом отделялся от масла .потому что два винта лопасти трутся друг о друга и нагревают масло до 120 градусов. в общем гавно а не компрессор
@glaymichael8514
@glaymichael8514 Год назад
Amazing
@Onwise_sales04
@Onwise_sales04 Месяц назад
👍
Далее
Выпускаем трек? #iribaby
00:14
Просмотров 494 тыс.
Я ВЕРНУЛСЯ 🔴 | WICSUR #shorts
00:57
Просмотров 1,1 млн
CompAir Aftermarket Genuine Filters English
11:36
Просмотров 51 тыс.
How a Diesel-Electric Locomotive Works
25:13
Просмотров 5 млн
How to do Screw Pump Maintenance and Overhauling??
30:19
iPhone socket cleaning #Fixit
0:30
Просмотров 15 млн