Laser Cut 3D Map Step By Step | Laser Engraver Atezr P10 Combo

Подписаться 62 тыс.

Просмотров 46 тыс.

50% 1

Laser Cut 3D Map Step By Step | Laser Engraver Atezr P10 Combo
In this video I will show the whole process of making a 3D map. I'm using only free software to do it and Laser from Atezr P10 Combo 10W.
Atezr P10 Combo 10W Laser Engraver - Perfect Laser Engraver For Small Business - Detailed Testing - • Atezr P10 Combo 10W La...
Shopping:
- ATEZR P10 10W COMBO - atezr.com/products/atezr-p10-...
- Other ATEZR products you may want to check out - shln.top/j6EUFae
Grab this discount code for the laser to save some $$$
Coupon: IN150 (with 150$ off)
Final price: 699.99＄
Promotion time: 2023/1/4-2023/2/4
This video was supported by Zbanx, a place for content creators and advertisers. Find out more here - www.zbanx.com/
Useful websites for this project:
- snazzymaps.com/ - map generator
- inkscape.org/ - graphic software
- lasergrbl.com/ - software operating the laser
This video is sponsored by Atzer who provided the laser Atezr P10 Combo 10W for testing and review. I have not been asked to say nice things about the product and all the information provided in my video are my own thoughts and experiences with this product.
All my tools, woodworking accessories and video making kit is now in one place for you to check out. These are Amazon affiliate links. With a purchase through this link, you get an awesome tool and you will support my channel without spending a penny more. As an Amazon Associate I earn from qualifying purchases, thank you for your support!
Link to Amazon is just below! Thanks!
Tools I use and recommend:
www.amazon.co.uk/shop/casualdiy
Shop on Banggood - www.banggood.com/custlink/DmK...
You can now support my channel via Patreon. If you feel my content adds value for you or its entertaining then help me continue to do so.
Any donations via Patreon are so much appreciated, you can find out more here: / casualdiy Thanks!
Big Thank You to my Fantastic Patreons
Ralf Jonasson
Caoimhín Concannon
Eddie Simmins
Kasia Sandej
Derek
Kerry Emery
Philip Davidson
Dawid Hassan Abdullah
Paul H
Peter Diggens
Tony Works Wood
Martin Worthy
John Allen
David A. Fortin
John Vodopier
Steve Price
Bob Mason
Ken Corr
Boyuan Tian
Rhys Adams
SlyHer
Marcin Kasjaniuk
Stephen Gerrard
Richard Norris
Charles Arnold
Clay Edwards
Colin Siford
Nick Hildenbrandt
You can support my channel by dropping some change in the Casual DIY Tip Box. Thanks for your support!
www.paypal.me/TomaszFranczyk
You can find me on:
Instagram - / casualdiy
Twitter - / casualdiy
Facebook - / casualdiy
Etsy - www.etsy.com/uk/shop/CasualDe...
Web page - www.casualdiy.com
Email - casualdiyuk@gmail.com
#casualdiy #woodworking #lasercuttingmachine
DISCLAIMER
My videos are for entertaining purposes only, your safety is your responsibility. Please do not follow my actions if you find them unsafe.

Хобби

Опубликовано:

17 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 182

@CasualDIY Год назад

Atezr P10 Combo 10W Laser Engraver - Perfect Laser Engraver For Small Business - Detailed Testing - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2tZ3kfMNAZY.html Shopping: - ATEZR P10 10W COMBO - atezr.com/products/atezr-p10-combo-set-laser-engraving-machine?source_type=sales_plugin_af&slt=sales_plugin_af&referral_code=ZJOJTQ8BZW0H - Other ATEZR products you may want to check out - shln.top/j6EUFae Grab this discount code for the laser to save some $$$ Coupon: IN150 (with 150$ off) Final price: 699.99＄ Promotion time: 2023/1/4-2023/2/4

@staszekgil4032 9 месяцев назад

Dzięki Tomku. Właśnie szukałem info jak zrobić taką mapę i trafiłem na Twój kanał. Jest łapka w górę i subskrypcja. Pozdrawiam. Staszek

@CasualDIY 9 месяцев назад

Dzieki wielkie i miłego oglądania 👍😁

@MCsCreations Год назад

Brilliant, Tomasz! Fantastic work! 😃 Some day I'm definitely going to try it! Stay safe there with your family! 🖖😊

@CasualDIY Год назад

Thank you kindly. Its a great tool worth having 👍 All the best

@LoriCarrollSCLori Год назад

Wonderful instructions! Thank you!

@CasualDIY Год назад

Thank you for watching 👍

@dragon_b 10 месяцев назад

Swietny film i oczywiście super wykonanie. Pozdrawiam z Poznania

@CasualDIY 10 месяцев назад

Wielkie dzięki, pozdrowionka z Kalisza 👍

@olafb.2929 Год назад

Very nice, just the explanation I have been looking for!

@CasualDIY Год назад

Glad that my video was some help 👍

@CopeauxAndCo 10 месяцев назад

just wanted to thanl you from France! Very clear and instrctive! great result, love it!

@CasualDIY 10 месяцев назад

Thanks for watching!

@stephensenior3589 Год назад

I've been looking at different makes of laser engravers for a while none of which fitted in with my needs either to big expensive or just too much time setting up, this 1 is perfect for my needs thanks for showing just how easy and simple and clean this one is. Love the project you have made a really nice workshop there since moving back home from the U.K. All the best for 2023 to you and your family.

@CasualDIY Год назад

Thank you kindly. Yes this one is really a good all around machine with solid capabilities 👍

@stephencave187 Год назад

Great work Tomasz.

@CasualDIY Год назад

thank you very much

@edvingluscenko9037 2 месяца назад

This is awesome tutorial, dziekuje !

@CasualDIY 2 месяца назад

Hehe thank you for watching 👍

@hythewoodworkdesigns Год назад

Ok, I changed my mind. This is one of the best you have done. Well done 👍👍

@CasualDIY Год назад

hehe I think so too :)

@johngo6283 2 месяца назад

This is amazing. I love your enthusiasm, and how proud you are of the finished product.

@CasualDIY 2 месяца назад

Thank you for watching

@francisbrady2739 8 месяцев назад

Fantastic video!

@CasualDIY 8 месяцев назад

Thank you for watching 👍

@deejaudible Год назад

Phenomenal!

@CasualDIY Год назад

Thanks

@747jdp Год назад

Fantastic project. Thankyou.

@CasualDIY Год назад

Thank you for watching 😁

@hansdegroot8549 Год назад

That was a very interesting video. I've never seen somebody doing this with a laser engraver. Thanks for sharing the video.

@CasualDIY Год назад

Glad you liked it 👍😁

@timahrndt2496 Год назад

Great vid. I always had issues with Snazzy, you helped a lot.

@CasualDIY Год назад

Glad I could help

@FamazLasy Месяц назад

It's a amazing map

@CasualDIY Месяц назад

Thanks

@sitgesvillaapartmentneilsc7924 10 месяцев назад

Nice one,well done, prefer the black frame as well, makes it pop, and of course you can also colour the roads and so on. Once thing I do often is use a Topographical map from online sources and then create a contour based map of your chosen area and then overlay some of this data as well for a real 3d experience. The final maps look superb.

@CasualDIY 10 месяцев назад

Nice one 👍

@garethsharp4039 Год назад

That's very clever!

@CasualDIY Год назад

Glad you like it 👍😁

@ememeable 7 месяцев назад

Merry Christmas and thankyou ❤ ejike

@CasualDIY 7 месяцев назад

Happy holidays!

@f1pitpass 8 месяцев назад

thank you! Subbed

@CasualDIY 8 месяцев назад

Welcome aboard 👍

@mikewood3334 Год назад

What a great project Tomasz, I may have to start saving as that seems like justification for owning the Atezr P10 Combo. I’m also thinking Jigsaw Puzzles could be a possibility as well!

@CasualDIY Год назад

Possibilities are endless mate. And this laser is good all around 👍

@rubendealva3585 Год назад

Beautiful

@CasualDIY Год назад

Thanks

@Darus2013 10 месяцев назад

Jak się masz! Fantasic steps brother.

@CasualDIY 10 месяцев назад

Thank you kindly 😅👍

@STANWoodwork Год назад

very nice project. It is looks awesome.

@CasualDIY Год назад

Thank you

@barry.w.christie Год назад

I love this sort of thing, taking simple elements and combining to make more complex pieces ... brilliant 👍

@CasualDIY Год назад

It came out better than I imagined it mate. Now getting asked to make few more lol new business venture I hope

@barry.w.christie Год назад

@@CasualDIY Brilliant, I'm also thinking of all the possibilities of my new laser and mill ... definitely a potential source of income ... spookily I watched my first video of someone combining different runs through the laser a day or so back. Parts are arriving daily for mine, so will hopefully start work on it as soon as I get out of hospital (11 days so far).

@CasualDIY Год назад

@@barry.w.christie i wish you quick recovery and plenty of time with the new toy

@spencerjuk Год назад

Great video. I think this could do well on RU-vid. Good luck.

@CasualDIY Год назад

Thank you kindly

@mervhoward5821 Год назад

Nice one.

@CasualDIY Год назад

Thanks 👍

@williamnoble3324 7 месяцев назад

Thank you for this...

@CasualDIY 7 месяцев назад

Thank you for watching 👍

@williamnoble3324 7 месяцев назад

Do you ever make 3D laser cut Lake map ? With different depth of the lake for every layer...

@CasualDIY 7 месяцев назад

@@williamnoble3324 not made one like that yet

@secobaairways4585 Год назад

Really nice Tomasz, let's hope this area isn't soon flattened for the new train line.🤞

@CasualDIY Год назад

This won't. Its the town center and surroundings. The 4 proposed train lines are more to the West.

@paulcooper9187 Год назад

Excellent piece of work. Wonder if it would be worth doing a piece on making your own picture frames to complement it, just a thought. Thanks

@CasualDIY Год назад

Yep sound like a good idea for a video 👍😁

@joesposted1024 5 месяцев назад

@CasualDIY I would like to do a project like this with the font you use in the lower left

@joesposted1024 5 месяцев назад

could you tell me where you got the very beautiful text in the lower left?

@airwolf08 3 месяца назад

Hello and many thanks for the video which i followed mostly untill when you come to laser it out,firstly when you were in inkscape after each layer did you save them because when you come to cut them out you just went straight to grbl and imported files from where? its driving me crazy cos i loved the video so much and unable to cut out my own maps many thanks

@CasualDIY 3 месяца назад

Yes saved them separate on my hard drive.

@stuarthawthorne87 Год назад

Brilliant well done looks great, what lazer do you think is best out of all of them you have tried

@CasualDIY Год назад

If you don't consider the price then this one the Atezr P10. Great cutting and engraving capacity plus built in air assist intake. If you are looking for something in the mid price range then Longer Ray5 with 10W module or Ortur Laser Master 2Pro with 10W module. If you are on a super tight budget then the Atomstack A5 Pro+ with 5W power module - good for engraving but cutting perfornance not as good as the 10W modules obviously.

@stuarthawthorne87 Год назад

@Casual DIY great thank you that's a good help 👍

@catsheep86 4 месяца назад

Great video! I'm trying to follow along and am getting stuck between Inkscape and the laser engraving software (I'm using lightburn). Did you save each file separately or are they layers or something else?

@CasualDIY 4 месяца назад

Yes I saved the files separately.

@benjaminpastrana9662 Год назад

❤🎉😊

@charlie-oe2zb 9 месяцев назад

This is Awesome. Can I ask which wood you use, is it just normal ply?

@CasualDIY 9 месяцев назад

Sometimes normal ply, but usually a ply that is designed for laser cutters

@worgaz Год назад

You just got me excited about a laser project...what was the wood material you used? Did I miss that? Do you see a benefit using something else?

@CasualDIY Год назад

I'm using 3mm plywood for this project. I think for this particular map 3mm ply works great as its not too thick as you put the layers together or to thin. If for example I only had 2 layers I could have used 4mm but anything thicker than that would just look strange I think

@bobhalsey7545 9 месяцев назад

Great video as always, something I'll definitely be doing for my home town - but I noticed when you did the cut for the water feature the area lower right effectively creates an island surrounded by the river which would drop out of the layer. When you are lueing-up I noticed it had tabs to maintain the position of this "island" how/where did you generate them please.

@CasualDIY 9 месяцев назад

I made them in Inkscape with path tool, I think its called.

@ogeemoto2853 8 месяцев назад

I think the tabs would also be the bridges and highways that would cross the river, meaning the island can still be connected physically

@ajoriordan Год назад

Hi Tomasz, brilliant project. I've been looking to do something like that for a while. Do you know if ATEZR have an EU distributor? Don't fancy paying import from the UK. Cheers Alan

@CasualDIY Год назад

Hi. Thanks 👍😁 Mine came from an Amazon fulfilment center in Germany.

@zacharydeegan8817 11 месяцев назад

Awesome tutorial. I am struggling with how you removed the text at the bottom of the images. They are there in Inkscape, but when you pulled them up on the laser software they were gone. Thanks!

@CasualDIY 11 месяцев назад

Just use the node tool in Inkscape to adjust the image👍

@littlerealnation2453 4 месяца назад

hello this is a nice video really helpful, what material of wood is that?

@CasualDIY 4 месяца назад

I used Ash wood for the frame. Thank you for watching 👍

@markhulette6987 Год назад

Great project! This is on my 'To Do' list- I appreciate the link to Snazzy Maps!! Sorry if I missed it but what was the thickness of the wood? Looked a little thinner than 3mm. Thanks!

@CasualDIY Год назад

It's 3mm plywood 👍

@markhulette6987 Год назад

Good deal! Thanks for the quick reply!

@CasualDIY Год назад

@@markhulette6987 No problem 👍

@khong6373 6 месяцев назад

Thank you for the tutorial. But when i drag the picture into the Inkscape, it doesn't show up, only a big Cross showing. Do you know what is the problem?

@khong6373 6 месяцев назад

I got it figured, i had it in Outline view. :)

@howardbibby8983 5 месяцев назад

hi, good video, but how do you remove the cut border that outlines the water layer? strujggling to get rid of it, any help appreciated

@CasualDIY 5 месяцев назад

I think the process is on the video. Not sure what else you are looking for.

@user-gi9nd2jn7d Год назад

Good map as it helps me getting so close to what I like to do. I am struggling with making and connecting the "frame" look to the highway layer. Can you clarify? Thanks.

@CasualDIY Год назад

I've used Inkscape to sort that out. You can connect any open areas or close them off.

@user-gi9nd2jn7d Год назад

@@CasualDIY Thanks for the response. I am using Inscape and have tried many options to eliminate the cut paths but not sure what I was doing. Can you give a few words what to click on?

@CasualDIY Год назад

@@user-gi9nd2jn7d you just need the node tool to do that, there are quite a few tutorials on RU-vid on that.

@user-gi9nd2jn7d Год назад

@@CasualDIY yes thank you. I have been messing around with it all day and did figure it out with a bunch of nodes that needed to be broken apart and then connected to close the opens. Thank you for answering and the vid was awesome. I've watched it like a dozen times.

@francisbrady2739 5 месяцев назад

Quick question, is there a way in Inkscape to make the local roads just a single line rather than engraved? When I try and switch it to line, it draws the road as a double line and encloses it.

@CasualDIY 5 месяцев назад

Hmm I'm sure there is a way would have to look through some tutorials on RU-vid

@xivon85 9 месяцев назад

Realy cool, can you Tell me how do you get the letters from Google away ?😬

@CasualDIY 9 месяцев назад

I use Inkscape and the node tool to do that

@jarodmorris4408 6 месяцев назад

What you can make with a laser engraver and cutting machine....and table saw and miter saw. You wouldn't HAVE to put the border on it but you're right, it looks fantastic with the black border.

@CasualDIY 6 месяцев назад

What I always say, adjust the project to the tools you have and the abilities you have.

@Limitless.ByDesign Год назад

how do u get the roads to stick to te boarders?

@CasualDIY Год назад

All need to be connected - if they are not I use the node tool in Inkscaoe to make sure they are

@sesioneducativa7367 6 месяцев назад

Please tell me which material are you cutting and engraving with your machine, thickness? thank you Sir

@CasualDIY 6 месяцев назад

3mm plywood👍

@geordielicious-9084 Год назад

What type of wood did you use and how thick ? Thai is great work

@CasualDIY Год назад

For the frame? It was Ash wood I think it was 2.5cm thick

@geordielicious-9084 Год назад

@@CasualDIYand the wood for the map cutting ?

@CasualDIY Год назад

@@geordielicious-9084 3mm plywood

@kenthesparky178 Год назад

Could you show us the proposed routes for the high speed railway on your new 3d map?

@CasualDIY Год назад

Not on this one, it only shows the town centre and surroundings. The track lines are more to the West. I can send you a link to the website with all the track lines if you want 😉

@kenthesparky178 Год назад

@@CasualDIY yes please,I am disgusted with the way the Government is treating it's citizens as regards to this proposed construction.I wrongly imagined that your government would be so much better considering the history of Poland.

@CasualDIY Год назад

@@kenthesparky178 current government is the worst we ever had mate. Drop me an email casualdiyuk@gmail.com and I will send you the link and explain which options are bad for us.

@davidgruty Год назад

Nice project One question, when you make the water file the bodies of water are "continuous", but when you cut it they are not, they are cut where the bridges are. How have you changed this?

@CasualDIY Год назад

In Inkscape free software 👍

@davidgruty Год назад

@@CasualDIY yes I mean you did it by hand, it's not shown on the video

@CasualDIY Год назад

@@davidgruty yes otherwise the video would be 2h long lol

@davidgruty Год назад

@@CasualDIY aha Is it possible that you make a video showing this kind of work? There are many inkscape tutorials, but they are very generalist... I would like to see how people do a specific task deleting nodes, lines, connecting them, shortcuts...

@CasualDIY Год назад

@@davidgruty hmm that would be a very boring video that most of my viewers are not interested in I'm afraid. There are some good videos out there showing this tho. That's how I learned this 😅

@dysongibson4936 Год назад

did you save each file in Inkscape as a simple SVG or something different?

@CasualDIY Год назад

As I used LaserRGBL for this I just saver each file as JPEG

@dysongibson4936 Год назад

@@CasualDIY interesting so LaserGRBL can use JPEG and cut or engrave with them. I dont think I have that option in lightburn

@CasualDIY Год назад

@@dysongibson4936 Cut lines are separate file, engrave is a separate file. Not all on one file. Lightburn on the other hand allows you to have engraving and cut lines in the same file

@secobaairways4585 Год назад

Now that I actually have a laser I've returned to this really nice project. Frustratingly, once I trace the images in Inkscape, the fill & stroke feature doesn't remove the black background colour, in fact, it doesn't make a difference at all. All ideas are welcome!

@CasualDIY Год назад

Did you use the path tool I mention? It creates the vector copy from which you can remove the background etc

@thefutureisnow8767 Год назад

Nice English, Tomasz:)

@CasualDIY Год назад

Thank you

@francisbrady2739 8 месяцев назад

One question: My water all ended up as open shapes, how did you get them to closed shapes so they would cut out?

@CasualDIY 8 месяцев назад

In the Inkscape software use the Node Tool to close them off

@francisbrady2739 8 месяцев назад

Thats my issue, I can;t figure out how to close them. @@CasualDIY

@francisbrady2739 8 месяцев назад

They cross over the bounding box, so I can't close them off without screwing up the shape of the box. @@CasualDIY

@joopstroop8926 Год назад

how do you save your files when you done in inkscape my water is not fall out all my land is comming out

@CasualDIY Год назад

In Inkscape you need to close off the water with node tool to create closed areas.

@robertusm 5 месяцев назад

When you engrave the local roads on the same sheet of wood as the water, what do you do (or what happens) when a local road crosses a stream/river?

@CasualDIY 5 месяцев назад

Base level is water, next cutout for water and local roads - if there is a bridge then it will be there just need to make sure it's connected.

@robertusm 5 месяцев назад

@@CasualDIY Yeah, but when the waterways are cut first, the bridges are r shown on the file. The entire waterways will be cut out contiguously and then the roads will be engraved and there won't be anything crossing the water to be engraved on. Or am I just not getting it?

@CasualDIY 5 месяцев назад

@@robertusm On the same layer you cut the water and engrave the roads. That means on that one file you need to make sure the bridges are there and connected. Ie the water cut out is separated by the bridges. It's one file, one layer for both cutting out water and engraving roads.

@robertusm 5 месяцев назад

@@CasualDIY ok, I thought they were separate layers. Thanks!

@robertusm 5 месяцев назад

@@CasualDIY I see the roads crossing the water on your video, but when I bring the water map into inkscape, the water isn't broken by bridges. When I combine the water and roads layers in Lightburn, it still wants to cut the water first, without bridges and then engraved the roads. What step am I missing?

@natashastruwig8063 Год назад

Do you also design and sell personal maps to cut out

@CasualDIY Год назад

Currently not

@myhoneyshandmade1077 Год назад

I do. I would love to help.

@mmarshall1231 Год назад

are you not mentioning steps? are you saving each layer separately? also, at what point are you cropping out the google watermark and trademark stamps?

@CasualDIY Год назад

Saving each layer individually yes. You can make amendments to the graphic in Inkscape at any point.

@garymorin4813 Год назад

It looks great! I can now combine ,y career working with maps and GIS with my woodworking, all I need now is a laser cutter, does anyone want to sponsor me one :)

@CasualDIY Год назад

Hehe start a channel they will sent you one for sure 😅👍

@garymorin4813 Год назад

@@CasualDIY I can see it takes a lot of work to maintain this channel, well done. I must admit I love the idea of CNC and laser, but I've to get my workshop sorted out first I need to make benches etc.

@CasualDIY Год назад

@@garymorin4813 it does take a lot of effort and hard work, now I wished I've started just a vlog channel 🤣 These are amazing tools and what they can do and how you can utilise them opens a lot of new doors for project opportunities. I could use a CNC to be fair, that paired with my 3D printers and laser engravers would future proof my workshop for a while. Great tools to stream line work and speed things up. Specially if you are a one man band type of a business like me.

@abedlalkhawaldeh580 Год назад

very nice but please where are the names of the areas

@CasualDIY Год назад

If you want the names of the areas just make the correct settings in the initial online website I presented

@bahadraydn4903 Месяц назад

How can we add text like city name ?

@CasualDIY Месяц назад

You can add the text to any layer with Inkscape or in Lightburn

@Gary.009 5 месяцев назад

On the bottom of your image you have "keyboard shortcuts, map data" etc etc.. but then in the end you got rid of that before you start cutting it out. How did you do that??

@CasualDIY 5 месяцев назад

Can you drop me time stamps please I will have look what you are after exactly

@Gary.009 5 месяцев назад

@@CasualDIY Hi, thanks but i figured it out!

@Gary.009 5 месяцев назад

@@CasualDIY I do wanna ask you something else.. how did you manage to get a "frame" around the highway lines in Inkspace?

@CasualDIY 5 месяцев назад

@@Gary.009I just used the line tool in Inkscape. And then node tool to connect everything

@Gary.009 5 месяцев назад

@@CasualDIY You mean the pen tool, straight lines and on the same layer?

@ivandrazic9805 Год назад

Brother, how have you added the border with the name of the city?

@CasualDIY Год назад

I've done it in Inkscape just draw few straight lines and text

@ivandrazic9805 Год назад

@@CasualDIY do you then merge the layers and then use the trace bitmap?

@CasualDIY Год назад

@@ivandrazic9805 You don't have to trace bitmap afterwards as far as I remember

@simonedmundson7271 Год назад

Great project, good instructions to follow. Are there any steps skipped? Such as when the text from the bottom is removed and is the water edited? When I create the water vector as instructed, then load it into Lasergrbl it has a square boarder and is not self contained like on yours. Also it is not a PNG file. Any advice? Thanks.

@CasualDIY Год назад

No stepps missed. Just amending the graphic to what I want exactly. One thing you need to be aware of when doing the water cut out is that the water lines need to be closed off to be cut out. Are you using correct settings in lasergrbl? You can adjust few things there that would give something you are saying.

@simonedmundson7271 Год назад

@@CasualDIY Thanks for your reply. The water lines aren't cut off which is giving me the issue and I was struggling to figure it out. Probably easy to do but I am new to this!

@ayjay1977 Год назад

@@simonedmundson7271 I have the same problem. And I am sure that there are steps missing... for example closing the water lines and remove the frame around ;) This is exactly what I am currently struggling with also. But in total a quite good instruction.