Laser-Cut Multi-Layer CROSSES! - No Demons here! 

They look really nice!

Go Army! Beat Navy! ;) (thank you for your videos! and congratulations on your retirement!) 🍻

Love how easily the co2 lasers cut through fast and clean. I got into lasers during lockdown but only have a diode one at the moment that I bought to make a coin display frame. I'm a painter/decorator by trade and I have to say.. that painting looked painful haha.. Get yourself a small 4inch roller short or long pile you can experiment, painting those boards first or rolling the bits after the cut. That'll save you hundreds of hours over time and time is money after all. They look great though, good luck with the new business venture.

Those crosses look amazing. I’m looking forward to see more of your laser projects.

Congrats on your new journey! Thank you for your service . Looking forward to more videos.

Nice work. I appreciate the effort put in to your content. Well done!

Thanks for your service!!!

Really cool project. Very little burn char...

Thank you for your service. I already like this channel.

crosses looking great.i would say design your own and sell this staff.yes designing takes time and money but then you learn a lot.My favorite is the cross with the red and white color.this color combi looks really good.the others looking great as well but i would give them multi colors as well.

Thanks!! So glad you did this video. I've been looking for a how to for these kinds of projects. Very Cool and Very Nice work. Keep it up.

I make these same crosses. Highly suggest using 3M double-sided adhesive (except for the back piece of course). Makes life soooo much easier. I also prepaint my boards and it is such a time saver.

RB! Have you thought about use an airbrush to stain? You can adjust output to lightly applying stain and be easier and faster.

Crosses are gorgeous! Congratulations on starting your own woodworking business. Best wishes!!!

Last comment - maybe - but wanted to also say I really like the ones with the very close colors - especially because of the way it reacts different to viewing angle/light. Nice job!

Love them good job

Good content and congratulations on going full time on your woodworking business, hope to there some day. My wife and so just got a Thunder Nova 24.

Love these crosses. Great colors!

Won't hold the Navy service against you...from a retired USAF type. 😁 Just came across your channel. Purchased a laser for my shop also, although a much smaller one. Looking forward to trying out some of these projects. Have had a woodshop for a number of years. Maybe you have already conducted a tour of your shop but if not would be interested in seeing your set up. Thanks and keep them coming.

I've had my Thunder 51/100 for about 10 months now and it's been an amazing tool! Nice job on the layered crosses, I sold a bunch of nativity scene layered crosses for Christmas this year. Keep the videos coming.

Welcome back shipmate, I missed ya.

Hi there. Great vid. I've looked on Amazon, but can't find tinted stains like you have...

Que lindas! 😍😍😍🤩🤩🤩👏🏻👏🏻👏🏻👏🏻👏🏻

Very Cool great job brother. Liked and Subscribed!

Those look awesome. I'd love to see the review on the thunder laser. I've been researching them for a while.

show de bola,👍👌👌🥰🤗é muito lindo esses trabalhos

I just clicked onto the link and it said not currently selling on Etsy. 07-02-23

Mas não mostrou como fez! E a ordem da montagem, as etapas…já está incluído no programa ou em um aplicativo? Muito lindo tudo e você é um artista! 👏🏻👏🏻👏🏻

Hi, everything is brilliant. I just failed to understand how you got the cross separated to different layers. Would be thankful for some insides.

Wonderful job. Check, what kind of wood do you use for your work? Greetings from 🇨🇱

Nice work! I wonder if an airbrush wouldn't work well for this.

Can't seem to have hypersonic missiles without belief systems, you noticed that too?

Just stumbled on to your channel, nice work. Looks like a lot of time making these. How much are you asking for these?

Just watched your video. Ma woodworking must went out of business. Who else could you recommend laser files?

How come your cuts are so clean? No burn marks anywhere. What kind of laser do you have?

thanks for your videos! and congratulations a consulate where you get the designs I am from San Juan Argentinian, it is very difficult for me to get them THANK YOU If you can share what I get I will share it with you BLESSINGS

Have you tried hard printing roller to stain the pieces rather than the foam brush??

Wouldnt it be easier to use a rubber roller to apply stain like that? Something that is dense and lightly coated wont go into cracks like a sponge

Ohh very nice job! what kind of wood did you use and is it real that acrylic paint is the best of kind?

Great Job. One question, How are you hanging them? I don't see any slot or thing on the back??

the link to get the designs is no longer on etsy. would love to get them, but thank you for your service to our country, and thanks for the video. God blgess

14:01 The Red and the Blue crosses would look nice with a single layer of metallic Bronze or Gold paint too. 🙂

is there generator software to create the layers out there that is free?

So nice work how to download file

What size lens are you using on your laser? The sides of those cuts look pretty perpendicular to the front surfaces. I seen some stuff that has been cut and the sides are not smooth at all because the cuts are at a very slight angle.... doesn't show when cutting individual items much but as soon as you start layering things they stick out a mile.

Mirroring is quicker - just mirror BOTH horizontal and vertical and it ends up with a 180 degrees.

RU-vid got me. “enough of this, let’s get to the cutting” - ad.

Did you etch your Maker's Mark on the back with your contact information? Good video. What was the demographic that purchased the crosses? Just curious.

Im just starting outi have a problem with the line and fill how do you cut out the filled lines

Bummer…They are not selling on Etsy….Any clue if they are anywhere else?

Já fez algum projeto com rosto ?

13k $ nice...what i should buy for 900$ for start?

Curious how much you might sell these for…?

What speed and power did you use tu cut them?

Why you clean the paint after paint the layer?

what machine are you using specifically?

Not bad for a Navy guy 🤣🤣🤣

The Etsy page that you have a link to is closed!

What was the name of that glue please. Thank you

Can you give me the name of the paintbrush you use? thank you

what wood are you using? I'm new to this :D

link 4 buy the file dont work!

Just curious if you have tried to do the prestained wood before cutting and how the laser reacts with the stain?

Wouldn’t it be better to spray these multiple layer projects?

Etsy shop not currently trading

why not pre-paint all the pieces before cutting them out? seems like it would save a lot of time.

Great video, and congrats on your retirement former Marine here. What stain are you using? I have tried to find the brighter colored stains and have been having little luck.

Those turned out neat! How long did they take to cut out and at what price range were you able to sell them? Just ordered a CNC with laser and would like to try these.

Sir can u do paid layer design ?

will a regular smaller hobby diode laser like a Neje or Ortur do these?

Where could I buy one?

Can you still smell the wood cutting with your ventilation system on?

Hi, you get a very clean cut. Very little surface residue. Can I ask what power tube have you got in your laser and what power/speed setting are you using.

Holy crap I have a laser cutter but I gotta know how much that one cost please

I've had my Nova 51 for over a year and am just now getting my courage up. I have a mutli-layered design I want to do but I'm not sure where to start. I see you have a line and a fill layer. My design has 5 layers but I am not sure how to even start with the set up. So overwhelming.

Ma Woodshop is not longer an Etsy store

You sell this type of designs

What is the price of this printer?

How do I get those cut files That person is not on etsy anymore

What software do you use?

Can't you just use a spray can with the color that you want??

hi!! great job!!! let's do a collaboration?

inch/imperial system so stupid 3, 4, 5, 6, 7, 8mm - more easyer.

I hope you like the second commandments that says not to make idols or images of heavenly objects.

egoista