Тёмный

Laser Engrave Coasters | Acrylic Coasters | Wooden Coasters 

Trotec Laser Canada
Подписаться 44 тыс.
Просмотров 227 тыс.
50% 1

This week we are laser cutting, engraving and UV printing coasters with the logos of microbreweries from all around Canada.
We've used our Speedy 400 and Speedy 300 FLEXX laser engraving machines as well as our Mutoh 426UF UV printer!
We've created 13 unique coasters each with its own engraving technique. The Mutoh UV printer is available for distribution in Ontario.
**LASER SETTINGS** Click Here: goo.gl/NCqab7
Breakdown:
0:42 - Big Rock Brewery on TroGlass Reverse
2:06 - North Brewing Company on Trotec Maple Solid Wood
2:31 - Blindman Brewing on TroGlass Fluorescent Green Acrylic
3:10 - Driftwood Brewery on TroGlass Colour Gloss (Black, Yellow, Red, Orange)
4:18 - Brunswick Bierworks on Trotec Stainless Steel and Trotec MDF
5:21 - Nokomis Craft Ales on TroLase Yellow/Black
5:45 - Rogues Roost on Trotec Silver Anodized Aluminum
6:16 - Flying Monkey Craft Brewery on Smart-X Laserable Foam Board
6:48 - Side Launch Brewing Company on TroGlass Colour Gloss Black Acrylic and Solid Maple Wood
7:37 - Steam Whistle on TroGlass Clear Acrylic
8:32 - Prince Edward Island Brewing Co. on TroGlass Satin Black and White Acrylic
To purchase any of the materials you see in the video please visit our Consumables E-Store:
www.engraving-s...
------------------------------------------------------------------------------------------
To get a quote on our laser engraving and cutting machines, please contact us below:
Phone: 1 (888) 998 2217
Email: youtube@troteclaser.ca
Website: www.troteclaser...
Follow us on social media:
Facebook: goo.gl/UfHnEa
Twitter: goo.gl/GEgTwQ
Instagram: goo.gl/gJN5b4
LinkedIn: goo.gl/oBL6V4
Trotec Canada locations:
Vancouver | 20381 62 Ave #705, Langley, BC V3A 5E6
Calgary | 820 28 St NE #2, Calgary, AB T2A 6K1
Toronto | 1705 Argentia Rd #9, Mississauga, ON L5N 3A9
Montreal | 8096 Trans Canada Route, Saint-Laurent, QC H4S 1M5

Опубликовано:

 

29 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 107   
@NickoleDavisRepnmyhood
@NickoleDavisRepnmyhood 3 года назад
Beautiful work as always, I love the inlays best
@n29leathercraft92
@n29leathercraft92 4 года назад
very very beuatiful ideas
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Thanks!
@vincentliet7995
@vincentliet7995 3 года назад
Why playing music and why so LOUD?
@PhotoBoothStartUp
@PhotoBoothStartUp 5 лет назад
laser heaven
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
LOL thanks!
@karvtek
@karvtek 5 лет назад
Can you engrave the back side of extruded mirrored acrylic? I currently do it on my CNC router but a laser would be more efficient and cleaner.
@TrotecLaserCanada
@TrotecLaserCanada 5 лет назад
Yes you can, check out our video about it here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--DpwWeobs8A.html Especially if you have a FLEXX (with Fiber and CO2 laser source) the Fiber makes a flawless engraving and the CO2 can cut with flame-polished edges.
@Djvickers20
@Djvickers20 4 года назад
how much are the machines you used in this video. I think it was 3 different ones? i live in alberta
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
We may have used a few different ones :) but only out of convenience you can do them all on a Speedy 100 flexx
@Ritus
@Ritus 6 лет назад
Hello, Does cutting through the UV-printed area cause the ink/print to bubble along the edge when you cut through the print? I've run into this problem using a Mutoh 426uF + a speedy400.
@TrotecLaserCanada
@TrotecLaserCanada 6 лет назад
Great question, that does happen with some inks and some UV models yes. There are some acrylic adhesives you can buy from a 3rd party source for stronger adhesion. We would suggest to contact your UV printer rep and ask, they can likely point you in the right direction.
@fredriknordesjo8259
@fredriknordesjo8259 5 лет назад
I’m from Sweden 🇸🇪 I want to buy this laser machine Please tell me the name of machine and the price and where I can find it
@TrotecLaserCanada
@TrotecLaserCanada 5 лет назад
Videos Random Hello there! Please email youtube@troteclaser.ca with your details and we will pass the info to our partners in Sweeden.
@marklehr590
@marklehr590 4 года назад
Can we buy from you in the US?
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
of course, are you looking for a laser, materials or both?
@stephenancheta6141
@stephenancheta6141 Год назад
Hi, i always visit this site to learn some techniques and ideas. For the Nokomis coaster, after engraving and cutting, how did you clean the burn black edges? what cleaning product did you use and what are the settings? Im using the speedy 400 flexx. please if you can help me. Thank you in advance.
@queenidog1
@queenidog1 2 года назад
Excellent video...except for the irritating repetitive music. The host is excellent. I've got a modified K40.
@semperidem2577
@semperidem2577 2 года назад
That first coaster was awful, you could barely ready the word 'Brewery'. If you tried to sell those to a client they'd laugh in your face.
@glasgowjohn7831
@glasgowjohn7831 2 года назад
the music makes this video unwatchable can you upload it without it please
@jlwright9468
@jlwright9468 3 года назад
The music is incredibly annoying! LOL
@Delybuzz
@Delybuzz 3 года назад
Yo quiero aprender 😵😥!!! Donde puedo? Están lindísimo los portavasos 😎👍
@Новости-з3й
@Новости-з3й 3 года назад
Can you stop this awfull music ?
@Новости-з3й
@Новости-з3й 2 года назад
Stop that awfull music !
@peterscott5814
@peterscott5814 3 года назад
was the artwork done on Corel?
@ecsyntric
@ecsyntric 6 лет назад
camera to track registration marks is brilliant
@TrotecLaserCanada
@TrotecLaserCanada 6 лет назад
ecsyntric thanks!
@martinsteele3259
@martinsteele3259 4 года назад
Just found your channel, I am blown away by the coasters! Amazing machine!!!
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Thank you very much! We appriciate it!
@nextsolution3509
@nextsolution3509 2 года назад
Great video. Thank you for the effort. Please turn the volume down on the music drastically or get rid of it all together. Thanks
@mehrabedini4103
@mehrabedini4103 2 года назад
Your video was very useful. Thank U very much.
@terrybrockhoff8168
@terrybrockhoff8168 3 года назад
Very Impressive
@Intertanker
@Intertanker 3 года назад
I wonder what kind'a paint you are using, as by now not anyone could tell me what paint to use to avoid lasered areas not to start cracking, either at once or later.
@erkful
@erkful Год назад
If only trotec Australia had the same attitude to its product!!
@jasonenz4238
@jasonenz4238 5 лет назад
What is the pricing for a smaller unit...and what is the price of this unit? Thanks! :)
@TrotecLaserCanada
@TrotecLaserCanada 5 лет назад
Hi Jason, unfortunetly we cant give pricing online. Could you provide your email and country you are residung in and we will contact yoh with pricing. Thanks!
@slathian1223
@slathian1223 4 года назад
@Long Range Rifle The reason they do that is so they can change the prices on the fly, I am still not sure why they dont give a range. Smaller machines are from 2200-4000 depending on features.
@mrwilson4909
@mrwilson4909 4 года назад
did the laser etch out the wood for North Brewing Company wood coasters?
@jbouza09
@jbouza09 2 года назад
WOW !! Very cool, that machine is very versatile.
@Djvickers20
@Djvickers20 4 года назад
how much for the uv printer and the dual laser
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Hi David, if you email us at youtube@troteclaser.com we can provide more details
@davidnbrenmorgan5042
@davidnbrenmorgan5042 3 года назад
You talk too fast man and the music is too loud
@bitsurfer0101
@bitsurfer0101 4 года назад
I think the video would've been better and less distracting without the background music. Nice ideas though.
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Thanks for watching. We appreciate your feedback and will keep it in mind for our next video.
@foxtrollgames
@foxtrollgames 4 года назад
Inside speed for engraving! How fast is it going, in mm/s ?
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Our fastest laser the Speedy 400 can go at max speed of 4.2 m/sec
@tusharartspune6216
@tusharartspune6216 4 года назад
Very beautiful ideas.....👌🏼👌🏼👌🏼👌🏼
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Thank you very much!
@03stage2
@03stage2 4 года назад
Do you guys sell these substrates? I would like to try some of these methods. TIA
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Yes we sell every single material that is in this video. What country are you in?
@03stage2
@03stage2 4 года назад
@@TrotecLaserCanada USA, specifically Ohio. Who is my closest vendor?
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
@@03stage2 The USA HQ is the closest, tell them Canada sent you :) : 44747 Helm Ct., Plymouth, MI 48170UNITED STATES Tel: 734-720-9997 E-Mail: usa@troteclaser.com www.troteclaser.com
@theaarts007
@theaarts007 4 года назад
very nice work , nice idias and good machines
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Thanks so much!
@markfernandez8175
@markfernandez8175 4 года назад
Hello 👋🏼 can you please tell me laser model that your using for the video? 👍
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Hi Mark, the Speedy 400
@thetrident8883
@thetrident8883 4 года назад
What model is it??
@ibemex7633
@ibemex7633 4 года назад
NOKOMIS, Que material es? lo tienen en su linea de materiales trotec? como se llama?
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Hola, sí todos los materiales están en la descripción del video. Estos son todos los materiales de Trotec.
@mohammedqadir6187
@mohammedqadir6187 4 года назад
very nice your job
@miyogyver737
@miyogyver737 3 года назад
nice one
@tonytango6676
@tonytango6676 2 года назад
Impressive!
@PrussianRedWhiteBlue
@PrussianRedWhiteBlue 4 года назад
Hi, please could you mention what the material is for the yellow coaster?
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
That's our TroLase material that comes in 1/8", 1/16" and 1/32" thickness. You can find it on our website at www.engraving-supplies.ca thanks!
@wendydavis1845
@wendydavis1845 6 лет назад
Keep these types of videos coming please! Awesome for inspiration. What wattage is the CO2 laser? I have a Speedy 360 80W and was wondering how I would adjust the settings for cutting Smart-X with my laser? Also, would you know the settings to cut 10mm Smart-X with a 80W? Thanks.
@TrotecLaserCanada
@TrotecLaserCanada 6 лет назад
Thanks Wendy! Much appreciated and we certainly will! The Speedy 400 is a 100w, but you can make all of these on a 60w Speedy 100 (it will just take you longer). For Smart-X, click on the SETTINGS DOCUMENT in the description of this video and you will see it there. You need to do it in 3 quick passes. Since yours is 80w, try a bit more power and that should do it.
@djkhmer-wd2ud
@djkhmer-wd2ud 4 года назад
how much?
@UtubeEric12345
@UtubeEric12345 4 года назад
Wow, great work! Which of these would you say can go through a machine dishwasher? Or should I more consider them to be a kind of hand out for guests to bring home rather than reuse at a restaurant?
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Both, it depends on which item you're using, the metal acrylic and plastics can easily be re-used and washed.
@UtubeEric12345
@UtubeEric12345 4 года назад
@@TrotecLaserCanada Cool, thanks!
@alanmaciel4441
@alanmaciel4441 6 лет назад
como faz pra deixar a gravação bem branca no acrílico transparente? tickness 2 ?
@michaelbabul6421
@michaelbabul6421 6 лет назад
Great inspiration
@TrotecLaserCanada
@TrotecLaserCanada 6 лет назад
Thanks Michael!
@allengolladay4222
@allengolladay4222 4 года назад
awesome
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Thanks!
@blowmeracing
@blowmeracing 6 лет назад
I notice you cut the first coasters out upside down..I have found that when cutting acrylic the bottom edge is always sharper than the top ( first laser contact point) is this typical or am I doing something wrong? or is this the case when you cut the first coasters out and are ok with the sharp edge being on the top side vs the bottom? also I get the z offset, but what resolution are you using? thanks
@TrotecLaserCanada
@TrotecLaserCanada 6 лет назад
Chris Smith hi Chris, what laser do you have? what wattage ? and how thick is the acrylic that you are cutting? As for the z-offset, if we engrave in focus the acrylic will turn white, thus when we spray paint the colour on the back you wont see it from the front. We go out of focus on the z offset to engrave the acrylic clearly. As for the resolution the settings we used are in the link the description of the video.
@blowmeracing
@blowmeracing 6 лет назад
I have an epilog helix 50 watt, cutting and engraving 1/8 cast acrylic
@blowmeracing
@blowmeracing 6 лет назад
I think I managed..only hard part is trying to engrave through the multiple layers of paint
@khanifti7634
@khanifti7634 5 лет назад
Waoooo v nice... How much brother???
@TrotecLaserCanada
@TrotecLaserCanada 5 лет назад
What country?
@GJM91
@GJM91 6 лет назад
What settings were used to cut and engrave the TroGlass Colour Gloss for the Driftwood Brewery?
@TrotecLaserCanada
@TrotecLaserCanada 6 лет назад
Hi Gabriel, it's in the link in the description Row 5 and 6. docs.google.com/spreadsheets/d/1_ChmGY6lGTvIYBPRSGdtNxPZSL4z4LtW7xOG3RS-zWY/edit#gid=0
@GJM91
@GJM91 6 лет назад
Thank You
@dr.p.ramamurthy6458
@dr.p.ramamurthy6458 4 года назад
Wonderful
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Thank you
@cinemolegends8225
@cinemolegends8225 4 года назад
what this laser cost?
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Hi there, please email us at youtube@troteclaser.com and the country you're located in. Thanks!
@mamankkabur5958
@mamankkabur5958 5 лет назад
can i work in trotec as laser operator :(
@TrotecLaserCanada
@TrotecLaserCanada 5 лет назад
sorry we are not hiring in Canada at the moment
@michaeltatham4307
@michaeltatham4307 5 лет назад
.001 offset the profile for press fit
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
We usually find 0.007" works best, but it's trial-and-error
@danzellover8812
@danzellover8812 6 лет назад
Great machine Big imagination thx Man
@TrotecLaserCanada
@TrotecLaserCanada 6 лет назад
Danzel Lover Thanks we appriciate that!
@danzellover8812
@danzellover8812 6 лет назад
Trotec Canada hi man i have trotec rayjet 30 great machine
@TrotecLaserCanada
@TrotecLaserCanada 6 лет назад
Danzel Lover nice! You can easily do all of these coasters on a Rayjet!
@movarounnahr
@movarounnahr 4 года назад
Great job!
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Thanks Zarif!
@minutemanpressprinting5312
@minutemanpressprinting5312 5 лет назад
Very Cool!!!
@TrotecLaserCanada
@TrotecLaserCanada 4 года назад
Thanks!
@DennisHerrmann87
@DennisHerrmann87 4 года назад
Very nice Presentation! How would i ensure, that the inlay is as you mentioned 0.001 inch thicker than the cutout? I have custom shapes and i am not sure on how to copy and scale them correctly.
@sushilkumarrana1224
@sushilkumarrana1224 5 лет назад
what is price
@TrotecLaserCanada
@TrotecLaserCanada 5 лет назад
hi Sushil, we cannot give pricing over the internet. What is your email and country of residence?
Далее
ХОККЕЙНАЯ КЛЮШКА ИЗ БУДУЩЕГО?
00:29
Laser Etching Leather and Wood Coasters
9:35
Просмотров 15 тыс.
Reclaimed Woodworking with a Laser!  - 10 projects
14:40
The Trick With Laser Cut Box Joints
12:17
Просмотров 255 тыс.
25 Products That Let Me Quit My Full-Time Job
8:29
Lots of Decorative Ideas With the Laser Engraver
13:23
AI Image to 3D Laser Engraved Brass Coin!
7:00
Просмотров 259 тыс.