Lathe restoration. Simple lathe stand. 

Most comments seemed to slam this guy pretty hard but had you read the description, he is working on his skills. This lathe is not an antique. All it needed was some cleaning up, maybe some new wiring and a little new paint. He said was working on the stand, not so much the lathe. There was no need to take it all the way down and get extensive with it for what he was intending to do with it. So, lighten up. It's a working machine. It didn't have to be fully restored to 'like new' condition.

This thing found a better home! :D

a most competent and workman like renovation, thank you.

О нет. Друг. Это не простой токантый станок. Это компактный, многофункциональный Токарно-винтовой станок. у нас В СССР его называли ТВ6 - школьник. Возможно это другая модификация ВТ-ХХ. мечта любого мужчины в гараже) И да. в наше время все мальчишки в школе работали на таких на уроках Труда!

Excellent job

You gave it so much love

Great idea for fixing that handle with epoxy. Never thought of doing it that way. Top marks :-)

Я на таком в школе работал. Классная работа, аж ностальгия.

That looks a good one to service & make good on a stable stand!

A great lathe for the workshop!

Outstanding work, nice to bring a machine back to life

very charming old urss lathe

Вдохнул вторую жизнь в токарный станок 👍

Эх, вот бы в жизни всё было бы так просто, быстро и красиво)

Witammm!!Udana renowacja tokarka!!Efekty widoczne,bedziesluzyc na lata!Dobry pokaz filmowy!!Tak trzymac!!

Nice job on the tail stock knob repair..

A very good!

Cracking work mate keep it up saving a decent lathe from scrap nice workmanship thanks for sharing

I love the end !

I know that I’m a bit late in commenting but I’d like to say that you have an eye 👁 for detail. Very enjoyable to watch. Thanks 🙂

What a paint job...

A fantastic restoration and the casting of the handle with epoxy was sheer genius. I cannot wait to see what you produce on your new lathe. The work was done to your usual very high standards. A HUGE thumbs up.

Although you say you are "developing" your skills they are far in advance of mine, I want to go out and break something so I can fix it using your method. An absolutely brilliant find and a great size for a home workshop, I’m totally envious as I only have a small wood lathe.

Now that's talent right there kids.

Great restoration 👍👍👍

really cool little lathe

Great work, friend!

Simply marvelous and genius kob

Hydraulic oil is often about the right weight for the bed and cross slide ways (30 weight).

I suspect that the gearbox and apron gears need liquid oil rather than grease. Nice work.

Looks like normal human restoration that you and I can do. Within budget and time frame. Fixing worn parts, fixing broken parts. Not the crazy down to the last screw restoration one apparently nowadays needs to do to not attract butthurt perfectionists. That said, I cannot agree on your pick of the color scheme, gray is just.. too gray, you know. Some nice colorful hammer paint finish would have been just perfect. Your skill with the roller is second to none, though, I can never get this to work, brush for me all the way :) Also would have probably replaced the slotted screws with nice socket screws, but that's just me kinda like that hexagon look. Aside from that, the handle fix. Very very well done, who needs 2k mold silicone when you can use regular caulking one ;) And where that pens which paint you blew into the epoxy? Genius! Gonna remember that for whenever I need to do something similar.

really apreciated the no talking,, great work,, should Isay awsome..Thank you very much keep posting...

fico escelente o seu trabalho amigo ...OBRA DE ARTE...

Dude- you find the coolest things and then improve them!! *****

Nice job, and it will be adequate to learn how to do some metalwork on. Cheers.

That's a pretty cool little machine. Considering its origin you should have painted it red.

Dear friend, you are a genius. Good boy. Greetings from Italy.

I would be concerned about out of tolerance gears,bearings,sliding surfaces and of course the electric motor. Having said that I can't wait to run across one of these and get knee deep in gears and grease and nuts and bolts. I'll overcome my concerns about wear and tear as I work through the project. I would have used a paint brush instead of roller. Nice move on the wheel repair. Got some pointers. Thanks and nice job.

I was lucky enough to get a hold of some legs from a lathe from w.f&j barns made in rockford ill. I built a table from them and the thing turned out awesome

Not bad work, young man, especially for a first time effort with limited experience and tools. It might not be a perfect machine, but it is older than me, and I am no perfect machinist, but a useful old machinist!

You must be a very clever man, great restoration like watching all your video's , have a nice day . Brian UK !!!

good job

Beau travail.

Awesome job!

Man im Like in Awe! Right now Beautiful Job restoring that Old lathe! I love seeing old tools being restored rather than hauled off to the Dump/Garbage!!! Im sure youll get a lifetime of use and it will still be running strong! You did such a Great Job all Around!! You didnt take any short cuts and your hard work and time really Payed off! Goodluck to you and cant wait to see you making parts or whatever on your Brand new! Vintage lathe lol I love how you fixed that broken Wheel knob!(dont know the name) that was such a Brilliant Idea! Very Clever and it came out great! You couldnt even tell it was broken! Well take care i Subscribed so ill catch you later lol Have a Great Day!

После такой установки на тумбы я бы померил станину на "винт". На своём ТВ-16 устанавливал на эпоксидную подушку не притягивая, только после отверждения затягивал болты...

Hi just watched your video, would like to say what an outstanding job you've made of it. Therefore, it has to be a 10/10 bob in derby

15w 40 и СОЛИДОЛ!!!КАРЛ СОЛИДОЛ)))

Красава мужик!

Great restoration Sir ! very nice.

Nice job

how much did you get the lathe for, if i found an old lathe like that i would be so happy

Cool can`t wait to see you making chips.

Great work, friend! Ignore all of the idiots that offer only negative comments. Its YOUR LATHE, and you did it YOUR WAY. The negative people have NOTHING to show for their negative attitudes, while you have a beautiful old lathe in great working condition that you can now enjoy! A+ friend! by the way, I restored a 1937 South Bend 9” model C just recently. I LOVE IT!

Диском отрезным похоже краску снял. 👍

maravilloso... lo felicito... saludos... soy Marcelo de Berazategui.... wonderful ... I congratulate you ... greetings ... I'm Marcelo de Berazategui

The first thing I'd make is a new handle/knob that you repaired with epoxy. :) Well done.

Great video, although, I loved that green piant color.

Wow brilliant idea for the handle never would of thought doing the same thing but pure genius

It looks like an awesome little gear head lathe.What is the swing and distance between centers? Thanks.

Love the hat!!

Fajno!

Could have the complete disassembly even the gearbox , sand it than the paint with a compressor the result will be better than that thank you ?

Bom trabalho 👌👍.

Great video! And loved how you fixed the knob with the silicone mold. Oh and love your city as well! The Slava Ukrainia restaurant is an amazing place!

Esperaba mas trabajo de restauración.

A couple of observations. You could've fitted matching levers. Also, how about a Quick Change tool-post?

Very compelling presentation; you look like you knew EXACTLY what had to be done! Impressive shop, and your craftsmanship is impressive, a real artist! How is the lathe's accuracy? Stripping the paint is a task I would have avoided, but you did it effortlessly...

Good luck my friend

Не раскрыта тема поврежденных и не поврежденных узлов и деталей. Что на токарку, что под замену, что немного пошабрить. Заметно, что челвек даже не понял, как правильно разобрать станок.

nice paintjob , but it is abolutely not a restoration not redo the prismas , no new bearings or bushings , what have you restored ??

Keep going and you will be fine

Awesome work! What's the deal with those strings?

فنان ومبدع

Super

so much clever

Ну молодец чётенько сделал!!! только для основания нужно было бетон залить.

СССР - ТВ-4!!!!!!!!!!!

очень похоже, что это станок из школьного кабинета труда. У нас в школе похожие стояли.

muito bom trabalho show

Oh,,,,I wanted to see you turning something,,,nice job,,,l love to bring tools back too life,, you have a nice lathe there,, how much did you pay?

Cool restoration 👍I need 1 of this lathe where can I get one???

Good job fixing up the late. Ignore negative comments :) My only thought seeing this is about the bottom stand, while a great idea to have a drawer to stor stuff, is that stand not too deep? I would imagine you having to stand just a tad too far away from the lathe for comfortable use, especially if you stand for more than say 20 minutes working manually.

my dream machine even the size is perfect for me too bad cant buy one of these maybe after 5 or 10 years i will own one or maybe not 😢😢😢

super boulot

Can I recommend that you look at the channel of Xynudu on RU-vid, what he has to show you in metalwork, and particularly lathework will be very useful.

Try and oil the bed and cross slide every time you use the machine, and the tailstock barrel and bedway.

I have bought an restored 3 lathes in the past 2 months, that is a well built machine, bed is a little short,, but such a nice heavy duty headstock, what brand is it?? Never seen one like it.

bon travaille

Wait at 5:56 gasket nice and all but is that grease? Don't you think that cavity is to large for grease, where do you think it will end up when the gears start turning?

Take a Community College Auto Body Shop Class....please!

Very good, ok.

what Brand and Model is this lathe? What is the Country of Origin? I like it!

Дядько Максим вже лайк поставив?

Use light weight non detergent oil on all your parts,,,except open gears and I use lucas red n tacky on them,,, the grease is going to become hard and make it hard to slide on gibs

я одного не понял зачем ты его разбирал?

I use brake caliper paint on my projects,,, damn near bulletproof and resists grease and oil

Fantastic job and Hail to the Redskins!

Gostei muito bom, eu não sou mecânico nem torneiro mas reformei 3 tornos um do meu filho que eu não sei o nome e dois meus o primeiro um "SOUTH BEND" e o segundo um "LEBLOND 13' acho que o serviço de pintura e acabamento dos meus ficaram melhor. Se quiser posso até passar as fotos é só me dar o endereço. Abs.

А подшипники, маточная гайка? Как повысили допуск?