In this video, we will be able to see step by step how to carry out the stakeout in a complete floor of a house with a porcelain tile imitation wood.
We are going to see how to carry out the random locking, with some guidelines to improve the aesthetics of our layout, leaving it more beautiful and harmonious.
To start with the stakeout, we need to make some decisions that are very important and that are going to influence the development of all our stakeout.
The size of the tile joint between the porcelain tiles.
The type of glue that we are going to use.
The locking or arrangement of parts that we are going to carry out in the installation
If we are going to place installation joints in the door steps and
If we are going to install a leveling clamp system in the installation or not.
I recommend that to help you make the best decision in all these variables, you watch the previous two videos WOOD IMITATION, where I talk about all this, including the behavior of the soil with changes in temperature.
STEP 1 Select the element that will give the orientation to all our pavement.
STEP 2 Pull a line parallel to the element that we have selected, trying to extend it as much as possible in our installation area,
STEP 3 Measure the development of pieces throughout the house, assessing the areas where we want the floor to be perfectly rethought.
STEP 4 Move the line that we had provisionally marked to the final position.
Recheck all measurements to adjust line position.
STEP 5 Rethink our porcelain flooring throughout.
To carry out the layout of pieces along the length, we must choose the type of interlocking that we are going to carry out on our pavement.
At this point I am going to talk about random locking, including some BricoAlter-style guidelines, to improve the aesthetics and installation of our wood-imitation porcelain tile.
In longitudinal doorways, leave whole pieces.
The longitudinal layout begins with those ceramic pieces.
In the cross passages of the doors, place more or less long pieces. So that the fewest number of joints possible can be seen.
The interlocking of pieces will be aimed at facilitating the cuts of the pieces, trying not to leave ceramic pieces, with two different widths, but we will direct the cuts towards those pieces.
We will try to hide the transversal joints of the lock under the furniture of the house.
25 июл 2024