Тёмный

Learn about every Engine Layout in just one video | V-W-X-U-H Engines 

The Engineers Post
Подписаться 559 тыс.
Просмотров 549 тыс.
50% 1

Straight/Inline engine:
The straight or inline engine is an internal combustion engine with all cylinders aligned in one row and having no offset. An inline engine has a simple design and is often denoted as an ‘I’ engine. Usually found in four, six- and eight-cylinder configurations, 8 cylinders in a row would be too long to fit in most engine bays.
V-Engine:
V-Engines are one of the most common engine types; they have their cylinders configured in a V shape; it consists of two-cylinder banks-usually with the same number of cylinders in each bank-connected to a common crankshaft. These engines usually are at a 90-degree angle and are typically found in 6, 8, 10, or 12 cylinders.
Flat-Engine:
Flat engines are horizontally opposed piston engines. It is the same as the V configuration engines but with a 180° angle between the cylinder banks. Flat engines have been around since the 1890s. A flat engine is a 180° V engine that works similarly to any other V engine. Each pair of cylinders shares a single crankpin so that as one piston moves inward, the other moves outward.
Boxer Engine:
The Boxer engine is a horizontally opposed internal combustion engine designed with opposing cylinders on each side of a central rotating crankshaft. As you look at the piston movement, each opposing piston will do exactly the same stroke. They are actually mirroring each other. When the left piston is compressing, the right will also be compressing; when combusting, the second will also be combusting, and so on.
W-Engine:
A W-Engine is a type of piston engine where three- or four-cylinder banks use the same crankshaft, resembling the letter W when viewed from the front. W engines with three banks of cylinders are also called "broad arrow" engines because of the resemblance. W engines are less common than V engines. A W engine is typically shorter and wider than a V engine.
Wankel Rotary Engine:
The rotary engines are truly a unique concept and have been made successful by Mazda. It was invented by German engineer Felix Wankel.
It consists of a three-lobe rotor of a triangular shape with curved sides that rotates eccentrically in an oval chamber.
Radial Engine:
The radial engine is a reciprocating type of internal combustion engine configuration in which the cylinders "radiate" outward from a central crankcase like the spokes of a wheel. C. M. Manly constructed a water-cooled five-cylinder radial engine in 1901. The radial configuration was commonly used for aircraft engines before gas turbine engines became predominant.
--- Time Stamp --
00:00 - Introduction
00:40 - Single-Cylinder Engine
03:46 - Inline Engine
05:47 - V-Engine
08:46 - Flat-Engine
10:00 - Boxer Engine
11:58 - W-Engine
13:44 - Wankel Rotary Engine
16:02 - Radial Engine
18:01 - X-Engine
19:13 - U-Engine
20:27 - H-Engine
21:53 - Opposed Piston Engine
#engine #carengine #automobileengineering
References:
Wikipedia.org
thehenryford.org
oldmachinepress.com
simanaitissays.com
More Videos on Engines:
Different 'V' Engine Configurations - • Different 'V' Engine C...
Different 'W' Engine Configurations - • Different 'W' Engine C...
Different "Inline Engine" Configurations - • Different "Inline Engi...
Follow us on Facebook:- / fanpageengineerspost
Contact us: hello.theengineerspost@gmail.com
Visit our Website for more articles:-
www.theengineerspost.com/
Disclaimer:
This video is just for educational purposes only. We are not in the auto repair business nor publish automotive service manuals. This video is not reviewed or authorized by any vehicle manufacturer. This video is intended only as general guidance. Every system is slightly different, so refer to the owner’s manual of your vehicle for any specific information about your model. Remember that only proper service and repair procedures will ensure your car's safe and reliable operation.
Copyright Disclaimer:
Copyright Disclaimer under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational, or personal use tips the balance in favor of fair use.
If you find this video useful, please share it with your friends, and If you have any questions, leave a comment we’ll respond.
Thanks for watching, and subscribe for more.

Опубликовано:

 

19 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 261   
@norcalman01
@norcalman01 Месяц назад
The opposed piston engine you showed, with added rocker arms and connecting rods, is one I never saw before. I know of the OP engines used in Southern Pacific Railroad locomotives made by Fairbanks Morse. These were used to haul the fast acceleration passenger commuter trains between San Jose and San Francisco, that I rode on. The FM engines had two crankshafts top and bottom geared together with the final drive from the lower shaft. One crankshaft lead the other by 20 degrees. These FM engines were two stroke diesel with a rootes blower to push in air. They had no valves in the cylinders using only ports for intake and exhaust. They did not meet emission standards of the Bay Area Air Quality Management District though and were retired in 1975. I understand the same FM engines were used in marine service, having heard the same sound coming from a tug boat. The "Deltic" opposed piston engine was also mentioned. I have heard of these in some British diesel locomotives. This used three OP engines in an 60 degree triangular formation. Any 1 of the 3 crankshafts were used by 2 adjacent cylinder banks.
@mokrulgobline9403
@mokrulgobline9403 Год назад
Very enlightening video! Thank you. Most of the cars I've owned have been V6's or inline 4's. I've had an Audi A6 with a supercharged V6, which was a great engine until it got near 100K miles, very $$$ to repair. So, now I'm all about naturally aspirated V6's that can take 87 octane, like on my new Lexus ES 350, which has plenty of power and great gas mileage on account of its 8-speed transmission. I hope to keep it a long time -heard they last well over 300K and still run great, as long as maintained.
@echsylon
@echsylon Год назад
You mentioned that "Porsche, Subaru and Toyota are the only manufacturers that offer boxer engines", but you forgot BMW who offers several models of their motorcycles with excellent boxer engines.
@serbianwolfgaming9623
@serbianwolfgaming9623 Год назад
Honda boxer 6....he said superbikes use v4.... Only panigale, every other is i4
@watt6248
@watt6248 Год назад
🤓
@realherobrine5636
@realherobrine5636 Год назад
🤓
@gregcook1285
@gregcook1285 Год назад
Lotus did a flat 4 aswell??
@KaitouKaiju
@KaitouKaiju Год назад
@@gregcook1285 Lotus doesn't make their engines, they use Toyota engines.
@pjsunesis6664
@pjsunesis6664 Год назад
I'd like to study engineering, this video has inspired me.
@tsegabkarta6739
@tsegabkarta6739 5 месяцев назад
This is an AMAIZING and deep explanation about engine configurations in the world and you have showed us all of the world's engine configuration, Great Work🤙
@AndreSamosir
@AndreSamosir Год назад
Very nice introduction to ICE settings! Thanks and kudos!
@americantater.892
@americantater.892 Год назад
I have a 1997 Jeep Cherokee with the good old 4L i6, not very fantastic in terms of speed or power however she gets me through the snow and has so far been very reliable.
@noahrichardson691
@noahrichardson691 Год назад
I've heard that they're one of the most reliable engines made in recent times, up there with Toyota's 22re engine
@jwalster9412
@jwalster9412 Год назад
Torquey I presume.
@grantwhite8119
@grantwhite8119 2 месяца назад
Considered one of the most durable engines ever made.
@yellowhypergiant9971
@yellowhypergiant9971 Год назад
So much work had been done. Thank you for your great work.
@TheEngineersPost
@TheEngineersPost Год назад
Thank you too!
@PeterPan-iz1kk
@PeterPan-iz1kk Год назад
I have a Volvo inline four, a B230F. It just runs. Has over 300.000 miles on it now, and still runs like clockwork. Never been rebuilt or repaired, only serviced. A great engine!
@APOLO-oq3ce
@APOLO-oq3ce Год назад
Volvo engines have easily gone to a million miles on the African continent and a few in United states.
@DjokosurjadiSetiawan
@DjokosurjadiSetiawan 9 месяцев назад
Gak jaman. Ini cuma pakek hp biasa bisa menciptakan seperti itu. Lihat sendiri.
@DjokosurjadiSetiawan
@DjokosurjadiSetiawan 9 месяцев назад
Apa bang Ariel
@alexclement7221
@alexclement7221 Год назад
The Sherman tank "W-30" engine (by Chrysler) is not really a "W" engine, but rather 5 separate flathead inline 6 engines mounted on a single mounting module, with gears on the flywheels turning a large gear on a central shaft.
@julianstreet8675
@julianstreet8675 9 месяцев назад
Some later production Shermans like the easy 8 had radial engines
@shadowopsairman1583
@shadowopsairman1583 7 месяцев назад
It's called a crank case, no different than a horizontally opposed engine.
@bierce716
@bierce716 Год назад
You left one out, a relative of the opposed piston- the split single or twingle engine. In their day, they were popular in motorcycles.
@tengkusulaiman
@tengkusulaiman 9 месяцев назад
im so lucky to be borned in this era. I can study anything online. The knowledge is unlimited. Im considering now to study engine. Retired IT tech guy.
@scottjohnson9573
@scottjohnson9573 Год назад
The Sherman Tank engine was not called a W. It was 5 separate 6-cylinder inline engines (flat head) bolted to a common block (in place of each engines oil pan). It was called a Multi-bank.
@allangibson8494
@allangibson8494 Год назад
The Sherman used five completely different engines…
@SaintBuick
@SaintBuick Год назад
@@allangibson8494 Technically 5 engine sub-blocks which were bolted to a central crankcase. They were unable to operate independently as they shared their radiator, water pump, oil pan and oil pumps. 1 engine not 5 different ones.
@jebise1126
@jebise1126 Год назад
@@SaintBuick no no...different sherman models used different engines.
@julianstreet8675
@julianstreet8675 9 месяцев назад
Some later productions and variations had radial engines like the M4A1 which was a improvement of the standard production M4
@shadowopsairman1583
@shadowopsairman1583 7 месяцев назад
Crankcase, cylinder, head
@damindasampath5947
@damindasampath5947 Год назад
I had no seen some type of engine. (U, H, W) It is good. Thank you
@adamhindustani6269
@adamhindustani6269 10 месяцев назад
great work, thanks to you explaining all of this....
@Seryiuss
@Seryiuss Год назад
Thanks for the video and explanation 😄
@Antagraber
@Antagraber 3 месяца назад
Excellent video, Thank you! we have: SAAB 9-5 2.3 turbo (L4- reprogrammed ECU) + Ford Explorer 2008 4.0 (V6) + Cadillac Escalade ESX 2010 6.2 (V8).
@nickayivor8432
@nickayivor8432 Год назад
Happy New year 🎄 🎉 ✨️ The Engineering Post Thanks 👍 From Nick Ayivor from London England UK 🇬🇧
@DMC_KD
@DMC_KD Год назад
Thank you sir for bringing this information to us.
@allangibson8494
@allangibson8494 Год назад
You missed a few - the delta and opposed piston engines. The opposed piston engine has the cylinders in between two crankshafts with the pistons pushing towards each other. The delta builds on that by having three cranks and three cylinder banks between the three crankshafts. Junkers developed the opposed piston engines for aircraft use before WW2.
@BryanPacker420
@BryanPacker420 Год назад
You should have watched to the end, where they have the opposed piston, and what looks like an animation for a double opposed piston engine....
@steakandkidney3142
@steakandkidney3142 Год назад
The Napier Deltic is a very useful piece of kit. Locomotives, boats and the worlds most powerful fire pump.
@Thunderstormworld
@Thunderstormworld Год назад
There is another engine that not many have heard, also the most difficult but should be the most efficient, many tried to design and have either failed or had not been to successful, I had a try designing it too
@robertnicholson7733
@robertnicholson7733 Год назад
The master of opposed piston engines was junkers. The WWII Jumo 223 and 224 two stroke diesel aeroi engines were rhomboidal, that is a square standing on one edge, with four crankshafts. Look them up, they were magnificent. They never went into production and like the rest of Junkers were shipped to Russia after the en of WWII. The Napier Deltec engines were designed as a delta to fit into the hulls of patrol boats, the delta shape was a much better fit., Napier used Junkers technology that they licensed before WWII. There were compromises with the Deltec, one crankshaft had to turn in the opposite direction to the other two and the angle between the opening of the exhaust and intake ports was not optimal. Nevertheless, they sounded fantastic, especially the big Deltecs. There was no soundtrack for the opposed piston engines, you could use the Deltec but I think the best choice would be the Commer Knocker three cylinder engine, there is a good soundtrack of a Commer Knocker in Sydney. This engine used the arrangement shown in your diagram with only one crankshaft but used rocker arms to transfer the power to the crankshaft
@TheV4R
@TheV4R 10 месяцев назад
I-V-W-X-U-H. thats the only type of engine configurations i could find
@ZioStalin
@ZioStalin Год назад
I have 7 cars in total, mostly L4s, including also an L2 (with both pistons moving together instead of alternating, it's a Fiat 126 - similar to the famous 500 - so it's more like a double single cilinder engine..), a 383ci Mopar V8 and a Wankel (Mazda Rx8).
@ZioStalin
@ZioStalin Год назад
In more detail: 1971 Plymouth Fury III 4dr Hard Top Sedan 383ci (6,3L V8) 2007 Mazda Rx-8 (1,3L Wankel) 1994 Fiat Panda 4x4 with swapped engine (1,2L L4) 1972 Fiat 126 (650cc L2) 1991 Ford Transit (Diesel 2,4L L4) 1985 Citroen CX TRD (Turbo Diesel 2,5L L4) 1997 Citroen Berlingo (Diesel 1,9L L4)
@martintwum-baah9067
@martintwum-baah9067 10 месяцев назад
Great work, this is a wonderful information
@Mr.j3433
@Mr.j3433 7 месяцев назад
I don't comment a lot but this was a very interesting video it had a lot of helpful touches especially for someone who wants to learn (consider selling this in an info series package with more detailed information) For me it's a new year and it's customary to wish each other good things So I wish you a lot of health, happiness and wealth and a lot of success with the page
@BillHimmel
@BillHimmel 5 месяцев назад
Great vid, thanks a lot!
@davidherrera2465
@davidherrera2465 27 дней назад
Exelente Información 👉👍
@eduardeduard8786
@eduardeduard8786 Год назад
Прекрасное видео, огромное спасибо вам, столько лет двигателю внутреннего сгорания, одни и те же проблемы с резиновыми ремнями и моторными цепями , не кто не хочет поставить в мотор железный вал проточенный по спирали чтоб он крутил шестерни, удивительно!!!
@bingbing-ti2rv
@bingbing-ti2rv Год назад
I'm an aeronautic mechanic, and I've personnally even seen some Radial Engine with multiple stages ! (i don't really remember but it was something like 18 cylinders i think, wich was built as 2 rows / 2 stages, of 9 cylinders each.)
@rawhidelamp
@rawhidelamp Год назад
There exists the R-4360 Wasp Major, a 28 cylinder, 4 bank engine
@allangibson8494
@allangibson8494 Год назад
And the Lycoming XR-7755-3 36 cylinder radial or the Yakolev M-501 (a 42 cylinder engine) with a 144litre displacement.
@ATruckCampbell
@ATruckCampbell Год назад
Imagine the power of a full size two stroke Radial engine.
@davidlamothe6610
@davidlamothe6610 Год назад
Sounds like a double Wasp.
@givenfirstnamefamilyfirstn3935
You laugh at his B-17 radial producing 1,200 *_RPM!_*
@denismorgan9742
@denismorgan9742 Год назад
The first petroleum engine was made in Fenny Stratford, Milton Keynes. Petrol was first used to get rid of head lice. And was first used before Mercedes Benz in British vehicles.
@russellkeeling4387
@russellkeeling4387 Год назад
The opposed piston engines in the Junkers 88 of the Germans in the second world war were the only airplanes of the time that could fly across the Atlantic Ocean to South America without having to stop for fuel. The opposed engines made today are amazing, we have computers now.
@MrKeerthi58
@MrKeerthi58 Год назад
Very important and good explanation and presentation. Thanks. What about pendulum engine invented and developed by Argentinian auto engineer Troussa.
@patrickmurray3846
@patrickmurray3846 Год назад
there is also 2 and 3 cylinder I-engines, mainly find these on snowmobiles and jetskies. Oh and ya made a pretty big mistake, with 4stroke engines no 2 cylinders are firing at the same time. If 2 or more cylinders are in the upmost position, then at least 1 is on it's exhaust stroke. the 4 strokes are combustion, power, exhaust, intake.
@user-pv5yh4de6f
@user-pv5yh4de6f Год назад
자동차 기술이 대단하십니다
@jonjonjet1449
@jonjonjet1449 20 дней назад
I'm looking forward to saving up for a Pontiac solstice which has a v4 engine
@RecioDj
@RecioDj Год назад
Thank you, Kakler
@youssefabouharya3282
@youssefabouharya3282 Год назад
Keep going and thank you
@martinnovak9618
@martinnovak9618 Год назад
Good overview. My tips for types you missed ... 1.There is a special star configuration called "gnome". 2. Have you heard about Duke Engines? 😉
@stormlord55
@stormlord55 Год назад
Yes Axial engines. Either stationary block or rotary are interesting. Actually some were produced and were more or less successful. Michel from Australia comes to mind.
@timhallas4275
@timhallas4275 Год назад
Duke Engines are an utter failure. They never made it to production.
@robertnicholson7733
@robertnicholson7733 Год назад
@@stormlord55 The Michel crankless engines were essentially another barrel engine, Michel called the plate "the slant". The difference was that Michell overcame the main issue with the swash plate by using the Michell hydrodynamic thrust bearing. Michell revolutionized ships with his thrust bearing, it was superior in every way to its predecessors. Look A.G.M. Michell up if you don't know of him, apart from the bearings and motors, he was the first person to solve the Reynolds equations for three dimensions. Also, he wrote the seminal paper on structural optimisation before he applied himself to lubrication, unfortunately it was 50 years before it was used, too far ahead of the times. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-pqUjIZUCXC0.html This shows an experimental aero engine based on Michell's designs.
@ckinc89
@ckinc89 Год назад
Infomative video... Vry much tq ....
@markbrownfield1174
@markbrownfield1174 Месяц назад
That's not the only layouts! MadMarkTech
@steeljawX
@steeljawX 7 месяцев назад
This video needs an update. Wankels are making a return in the form of hybrids. Last I heard, which was a couple months ago, Mazda announced they'd be using Wankel rotary engines for some of their upcoming hybrid vehicles. So rotaries aren't completely dead and gone, just not a mainstream public use motor.
@HampterYesyes
@HampterYesyes Год назад
The surname if the creator of the rotary engine is just 👌
@goatman86
@goatman86 Год назад
Wooshing sound between each slide brings back elementary school PowerPoint presentations XD good vid though
@ronaldschoolcraft8654
@ronaldschoolcraft8654 9 месяцев назад
"Inline engines are smaller in size and take up less space." Tell that to a Caterpillar C-15.
@yordi55
@yordi55 Год назад
Thank you
@acargirlenthusiast17
@acargirlenthusiast17 7 месяцев назад
Imagine even though you have not got a car but your learning this😂
@mpetersen6
@mpetersen6 Месяц назад
Certain cylinder layouts are combinations of various types. Radials and inlines combine to make star engines. X layout is a form of that. Fan types and inlines combine to make W or Broad Arrow.
@jacksparro3150
@jacksparro3150 Год назад
Everything that I have learned from engineering school has taught me that the one big factor that affects aerodynamics is the shape of the car's exterior. Can you explain how a V6 engine improves a car's aerodynamic performance compared if the same car had an inline 6 or inline 4.
@TheAttacker732
@TheAttacker732 Год назад
The lower & shorter block can allow for smoother bodywork, if you're willing to make the engine bay a nigh-unrepairable Gordian knot of wiring, hoses, & ductwork. Thankfully, such affronts to good sense aren't practical to manufacture, making it a generally theoretical concern for cars. It's something that *should* have been explained in the video.
@Rev22-21
@Rev22-21 Год назад
Personally I think this clown is full of it.
@johncunningham4820
@johncunningham4820 11 месяцев назад
Excellent coverage of the Layouts . However , also too many Errant Assumptions . Thumbs Up regardless .
@THEJR-of5tf
@THEJR-of5tf Год назад
I did some R&D on opposed Piston Engines in the 1970s.
@android584
@android584 9 месяцев назад
VR deserved a mention as it uses a single head for the v banks. Also V-Twin engines are in the radial category and I suspect the W3 depicted was really a radial.
@mpetersen6
@mpetersen6 Месяц назад
I can't recall who but there is an aftermarket engine based on Harley cylinders that is a 3 cylinder fan type. Anazi built 3 cylinder fan engines before WWl.
@NikanDragosysSerpenDra
@NikanDragosysSerpenDra Год назад
im moree of a high bypass turbofan gasturbine engine, the CF6 series being among the favorites and the GE 90's
@ahmedmechanicoffical
@ahmedmechanicoffical Год назад
good work
@swilleh_
@swilleh_ 8 месяцев назад
only the rotary sound makes you forget about all the stuff you have to go thru, but it's worth it. THE BEST sounding engine EVER made.
@MaximRedin
@MaximRedin Год назад
Opposite diesel you can see in Soviet tank T64. It has a distinguished sound
@gregcook1285
@gregcook1285 Год назад
That was very good. But you missed the Deltic
@stevecritchley2506
@stevecritchley2506 Год назад
Thanks, I had to look that up - very interesting!
@jamesgeorge4874
@jamesgeorge4874 Год назад
Junkers Jumo 204, Kommer TS3, Naiper Deltic all examples of opposed piston diesels, of which Cummins and Achates currently are devoloping.
@givenfirstnamefamilyfirstn3935
Ju 86 R turbo opposed cylinder diesel high altitude photo reconnaissance WW2.
@WilhelmKarsten
@WilhelmKarsten 11 месяцев назад
Gegenkolbenmotor, invented by Wilhelm Oechelhauser... Hugo Junkers was his junior partner.
@richardmutyaba4936
@richardmutyaba4936 Год назад
So interesting
@jchrg2336
@jchrg2336 Год назад
"Off" If you are not in the right environment this engine (engineering) mech. thing of mine isn't all that inspiring. "On" .... It's an off / on On/oF relationship In my moments in momentum Great video. Explains correct
@manabroy2539
@manabroy2539 Год назад
First view from India Assam
@Dclxvi6x3
@Dclxvi6x3 Год назад
My ride has a shoe shape design developed by Converse they call it the Chuck Taylor All-Star 😉
@nasunorahl
@nasunorahl Год назад
Props in advance if this has my Polysphere.
@Thom101
@Thom101 Год назад
You missed the Liquid Piston rotary engine. Also the Duke and the weird Freepiston (no crankshaft) that was an electrical generator.
@WilhelmKarsten
@WilhelmKarsten 11 месяцев назад
All scams...
@Mentaculus42
@Mentaculus42 6 месяцев назад
Free-piston engine? Has some big advantages.
@zxen2330
@zxen2330 Год назад
Have you ever heard about the "TAUROZZI PENDULUM ENGINE?" I think that is the engine that giant oil company and government hate.
@KR8.
@KR8. Год назад
I would also like you to talk about the engines of Hungarian locomotives
@kailashsingh9737
@kailashsingh9737 7 месяцев назад
Very beautiful sweet video
@EldregeCadavos
@EldregeCadavos Год назад
Love me some rotary
@WilhelmKarsten
@WilhelmKarsten 11 месяцев назад
LeRhone or Uberusel?
@mnhusin509
@mnhusin509 5 месяцев назад
In U engine or any engine with 2 crankshafts, like 2stroke square4 or 2stroke v4, is bot crankshaft connected to transmission (crank A-transmission gear-crank B) or only one them (crank A-crank B- transmission gear)? Thanks
@mechguy8459
@mechguy8459 Год назад
It is a Comprehensive Guide 💗
@AntPictures
@AntPictures 8 месяцев назад
Modern X engine is used in a T-14 tank.
@Goofy_fatguy
@Goofy_fatguy 11 месяцев назад
"More cylinders you have more power it will made". K24 right now: I'm i a joke to you?
@olivertoeknuckleiii2093
@olivertoeknuckleiii2093 Год назад
The Wankel engine is still the best design in terms of power/ weight and simplicity. I would love it if we could use modern tech to ‘fix’ the drawbacks of the design. You cannot beat the Wankel for efficiency, power and balance of the car it is mounted in.
@givenfirstnamefamilyfirstn3935
The equivalent of stroke is tiny, they have no torque.
@davidaugustofc2574
@davidaugustofc2574 Год назад
@@givenfirstnamefamilyfirstn3935 but spin fast enough to make up for it
@mauserpad5111
@mauserpad5111 5 месяцев назад
@@davidaugustofc2574as if they need to wear out faster
@Starving_23
@Starving_23 Год назад
Merci
@sheriffdeen175
@sheriffdeen175 Год назад
Thanks sir
@poketrainer4513
@poketrainer4513 Год назад
Nice
@memeAlexcheramie
@memeAlexcheramie Год назад
Fun fact: the inline-6 cylinder engine is the most balanced engine(originally I thought the boxer engine was the most balanced)
@Demidovess98
@Demidovess98 Год назад
The Opposed Piston Engine was a T-64 tank :-)
@gabecuz-rm9sf
@gabecuz-rm9sf 7 месяцев назад
I have a diesel turbo 3.2L inline 4 and a turbo 2.5L boxer engine
@jibrailkazi
@jibrailkazi 10 месяцев назад
Nice❤❤
@Iconoclasher
@Iconoclasher Год назад
Regarding the "noisy" 4cyl engines, maybe it would be quieter if they put an actual muffler on it. 🤔
@McsMark1
@McsMark1 Год назад
You missed the DKM Wankel. It's the engine Felix designed and built. When he saw the KKM (the Wankel you displayed) Felix said - "You turned my Thoroughbred into a plow horse".
@user-tk2bk4yw3t
@user-tk2bk4yw3t Год назад
Please explain different types of electric vehicles 1 motor, dual, and four motor
@florinrazvangradinariu209
@florinrazvangradinariu209 7 месяцев назад
Nice.. i use v6
@jaw0449
@jaw0449 Год назад
My son wants to be an engine engineer on a racing team...any tips? He's a sophomore in high school
@tanthiennguyen9308
@tanthiennguyen9308 Год назад
Vielen Dank allen Mitarbeitern an Kompetenz Arbeitsplätzen Zufrieden haben bitteschön
@Hazza_the_great
@Hazza_the_great 10 месяцев назад
My mum's ford kuga has either an i3 or an i4 engine
@TheEscapisty
@TheEscapisty 4 месяца назад
Internal Combustion Engines = ICE
@jeangaza4090
@jeangaza4090 11 месяцев назад
Great
@TrevorSachko
@TrevorSachko Год назад
So rotary piston and deltic don't get a look in?
@shantichoudhary2432
@shantichoudhary2432 Год назад
👍
@denismorgan9742
@denismorgan9742 Год назад
There is another not mentioned and I don't know the correct terminalogy, where the pistons are horizontal with the axial shaft that as a fixed slanted disk around it, firing piston to the furthest part of the disk in turn turning the axle round.
@Thom101
@Thom101 Год назад
the Duke is that style of engine
@allangibson8494
@allangibson8494 Год назад
That was an oscillating disk engine commonly used in torpedoes but also used as a driven element in hydraulic pumps.
@stevehartley7504
@stevehartley7504 Год назад
Where is Eduardo Taurozzi's curved cylinder engine. Not widely used but immensely effective. Now used in compressors and filters
@alvarodeelias1727
@alvarodeelias1727 Год назад
5:27 so inline 4s generate noise when came cross bumpers on roads??? LOL
@shulammitedanso656
@shulammitedanso656 Год назад
I have an inline 4 in my Nissan march (CG13 DE)
@middleway1885
@middleway1885 Год назад
I'm interested in seeing how the engines can better withstand the volcanic plumes damaging effects on the engine... especially if we get crazy amounts of volcanic activity via the sun booping its energy and whatnot. 🎉😂
@mach1553
@mach1553 Год назад
22:00 The colored image moving parts doesn't match the B&W image moving parts next - 4 pivot points vs 8 pivot points.
@15uzu
@15uzu Год назад
Missing the "Deltoid" engine type used in locomotives
@kitsune1594
@kitsune1594 Год назад
You could have used T-64 tank engine, as it is opposed 5 cylinder engine.
@wayneholmes637
@wayneholmes637 Год назад
There is also the engine used in the Chieftain tank which was a vertical inline 6 cylinder 12 piston 2 stroke diesel.
@chadwickreno8499
@chadwickreno8499 Год назад
What kind of engine design layout would you get if you stuck two W engines on top of each other?
@bobvanbutselaar
@bobvanbutselaar Год назад
I'm guessing top heavy.
@scotttimmons61
@scotttimmons61 Год назад
A mechanics nightmare and engineers wet dream
@chadwickreno8499
@chadwickreno8499 Год назад
As in a W engine placed on top of another upside down W engine in the same manner as an "X" engine. I was also thinking of a 4 bank design rather than a 3 bank too. I imagine it would look something close to a "star" or radial engine.
@henkoosterhof5947
@henkoosterhof5947 Год назад
Straight 3.
Далее
Fazendo MÚSICA com COISAS ALEATÓRIAS 🎵
00:24
Просмотров 6 млн
Cast Iron vs Aluminum Engine Blocks: Which is Better?
13:51
This engine is better in every way?
18:29
Просмотров 374 тыс.
The INSANE H16 Formula 1 Engine!
9:42
Просмотров 516 тыс.