Learn tips how to weld holes | Gasless Fluxcore welding for beginners 

I must have been the one to burn the holes! Sorry about that! Thank you for the video!

Awesome

Your tips are exceptional for this newb welder. I've improved 10-fold due to your tips.

Awesome tips bro school students show me your channel and great information

I have to learn to be patient. My welds are just globs. It’s hard to get a hand technique for me. I’m going to look for some scrap metal to practice on.

Plug the holes with aluminium foil 😎

Grinder grinder lol

No gas welding

Some humble yet important corrections! This will be embarrassing! 😢 Sorry man but as this is a public channel and you are teaching welding techniques to your audience I feel obligated to put things right! Your stick out should be twice as long. Now with your short stick out it WILL create porosities/worms! Use a 3/4-1” stick out with flux core wire. Or even better - read on the wire box the recommendation by the manufacturer! Reason: the flux needs to be preheated before entering the weld pool otherwise nitrogen is trapped inside and when cooling down it wants to escape. Hence all your porosities. 😅 2) If you are between thicknesses (voltage settings) don’t go higher. Too high voltage (amps) also creates porosities/worms. Also: although flux core welding is somewhat less sensitive to rust etc than MIG/MAG (which is totally useless on uncleaned metals) it is far more sensitive than stick welding (with the correct pin) so… why not help your welding on the way by cleaning up properly before and between welds! I wish you would add that to the tutorial 😉 Kind regards Anders Sweden

"If it leaves a slag, you have to drag" f'n priceless wisdom right there! Dude you have basically unlocked what's problematic for most beginners (myself included) with a simple, common sense saying- position/distance are important but none of it matters if you're contaminating the joint and stacking on top of the slag that you just blew ahead of the puddle! That and your fill technique is a keeper- I'm sure others are out there, but most of the time these guys don't share how to recover from a blow-thru, they just say that you want to avoid them🤣- wish I had this video to reference a couple of years ago. Keep up the good work Coinsie!

Beauty of a video! Learned more in 8min than the last couple weeks on RU-vid. Simple, straight to the point tips!

The "star' method helps with some of my beginner's welding mistakes. Thanks for the explanation.

Avoiding making holes is a skill, so is filling them! I found through trial and error the star method seems the way to go, beef up the edges to take a hot bead. Seems with welding, every weld is added experience and skill, you are always learning better technique.

All I see is weld weld weld

Thank you for the tip

Right on the money,I use a gasless at home for car stuff exactly like that,you can fill anything, cheers, Mike

Hi buddy I like your RU-vid videos looking forward to the new ones so keep them coming, thanks from Edinburgh Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🏴󠁧󠁢󠁳󠁣󠁴󠁿🍻

Super lesson...

Really thin stuff can test your patience, when even a split second longer can blow right thru it. then you spend 10x as long repairing holes.

Dude, you're all right. Thanks.

You are really legend

Where did you get that hat? Can you send me the link??

Sck as job dude

I am a not very experienced hobby welder. And if porosity is a good thing that would make you a top notch welder

Is this a multipass wire or can it be done with a single pass fluxcore?

Awesome

I'm new to this believe me your videos help thanks bro

Awesome

great video

Very good

Your lessons are the Best !

You are a bad ass welder…I want to be you one day😂😂😂

Gracias por los consejos, saludos desde Tultepec Mexico!!!

That's been my favorite 115v machine for a long time now. The reliability is unbelievable.

a grinder and paint makes me the welder i aint

Thanks for this it has helped a lot.

Good tip, thank you 👍

Good video

Ur golden

I want to patch some holes in some tricks! Lol

i love this

Thats a sick machine!

So it’s ok to grind it back down and weld over my old weld for strength

I found this page by accident but I have honestly learned more from you than anyone else. The explanations are straight and direct. Thanks.

Wish i had watched your video before i started my project! Oh well, it will end strong. Thanks!!

Flux core has a number on the label that , if it ends with a GS it is for single pass welding. I use both types single and multi pass.

Thanks for the advice on filling holes. Good job. Keep up the good work

great tips, man!