Learned a hard lesson with the Atomstack A12 Pro Laser Engraver

Подписаться 127 тыс.

Просмотров 7 тыс.

50% 1

Never underestimate the amount of fumes laser cutting can produce!
Here's the machine: atomstack.com/...
And here are some of the different materials I got to test with:
Basswood: amzn.to/3U5plvf
Calvana: amzn.to/3RZNgt6
Plexiglass: amzn.to/3vHAWGC
Leather: amzn.to/3U9VhyG
Vinyl: amzn.to/3Ud94nV
Be Safe!
🔥These links support my madness🔥
💲 NordVPN: www.bmbsucks.com
💲 Members-Only Punishment: bit.ly/bmbmembers
(As an Amazon Affiliate, I earn from qualifying purchases)
💯These are my other Socials💯
🔹Twitter: bit.ly/BMBTw
🔹Instagram: bit.ly/bmbinst...
🔹Tik-Tok: bit.ly/bmbtock
🔹Discord: bit.ly/BMBDISCORD
✉️P.O. Box for Mail✉️
Byte My Bits
P.O. Box 77
Haysville, KS 67060
#Atomstack #laser #engraving

Наука

Опубликовано:

21 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@MichaelP-ns 6 месяцев назад

You should really watch Maker's Muse's video on laser cutter safety before buying or using a laser cutter.

@XxTWMLxX 6 месяцев назад

Good ol' fake PVC leather! Awesome to breath in.

@Lyrkan_ 6 месяцев назад

Yeah, that's was really painful to watch... he pretty much speedrunned everything that you shouldn't do with a laser cutter/engraver. - Don't cut/engrave vinyl or anything PVC based (it CAN kill you) - Don't cut/engrave something if you don't know what it is (even if the leather was actually leather the way it is tanned can introduce really nasty things) - Don't move the machine while it's running - Don't run it in a closed room without any ventilation/filtering - Don't run it with an animal nearby - Don't leave it unattended - Don't use glasses provided with those cheap machines

@CGGC0202 6 месяцев назад

first rule with those laser engravers, NEVER trust the glasses they give you ...

@revtoyota 6 месяцев назад

Get Lightburn it is the best software for lasers out there. It's worth the few bucks it costs a year to use it. As for venting put the laser in an enclosure and vent it outside. Just about everything has a coating on it these days and ALL of them off gas nasty stuff. Ohh and always use the air, it keeps the lens on the laser clean and the edge (side) of the board you are cutting from charring. It also helps with engraving use a low setting.

@aerografiaaerografia7405 2 дня назад

I intoxicated myself, cutting poliester

@Cameronsutubes 6 месяцев назад

Would this be the first time reading instructions Jason 😮

@hazy33 5 месяцев назад

And this folks is why USA'ers need their very own special safety instructions.

@Pro4TLZZ 4 месяца назад

Dont doubt the lase

@mitchellstl 6 месяцев назад

Fior ventilation, get a window fan. Have it blow the air out the window.

@TimOsman 6 месяцев назад

Get lightburn its $60 i think. I don’t mnd the smell of burning wood so i put a fan behind it and turn it on, smell is light but no smoke. My cheap sculptfun can do 3m vinyl, wood, cement, etc etc.