As an Amazon Associate I earn from qualifying purchases.
🔥 CW Practice Key - MFJ: amzn.to/2VP4o75
🔥 Sling Shot 4 tree antenna: amzn.to/2SRCDZT
🔥 Arborist Throw Box: amzn.to/2SSwJr8
🔥 Throw Bag2: amzn.to/2BVfNt1
🔥 Tree Antenna Weight: amzn.to/2Fvj6dS
🔥 Xiegu G90 HF Radio: amzn.to/3O6Ktho
🔥 Portable Speaker: amzn.to/2VNK2v4
These are my tips and tricks for learning CW / Morse Code for ham amateur radio. There are many skills in this tutorial that I talk about in this video as well. It takes practice to get good and sending code on the radio.
CW software is going to help you get there also. You'll need a good CW Iambic Paddle as well. Continuous wave has many benefits. You'll want to reap these benefits when I teach you CW keying.
Learning Morse Code is not that hard. Now simply called "CW", radio communication by Morse code was the only way to communicate for the first decade or more of Amateur Radio. Radiotelegraphy, the proper name, descends from landline (wired) telegraphy of the 19th century, and retains some of the old culture, including a rich set of abbreviations and procedures. Morse sent by spark gap transmitter was the first wireless communication mode. These "damped waves" were very broad and inefficient for communication.
They were soon replaced by "Continuous Wave" (CW) transmission, using vacuum tube oscillators that were capable of a very pure note. Today, modern Amateur Radio transceivers use solid state components and microprocessors to support a variety of communication modes including CW, voice, image and many digital data modes.
A continuous wave or continuous waveform (CW) is an electromagnetic wave of constant amplitude and frequency; a sine wave. In mathematical analysis, it is considered to be of infinite duration. Continuous wave is also the name given to an early method of radio transmission, in which a sinusoidal carrier wave is switched on and off. Information is carried in the varying duration of the on and off periods of the signal, for example by Morse code in early radio. In early wireless telegraphy radio transmission, CW waves were also known as "undamped waves", to distinguish this method from damped wave transmission as effected by early spark gap style transmitters.
Very early radio transmitters used a spark gap to produce radio-frequency oscillations in the transmitting antenna. The signals produced by these spark-gap transmitters consisted of strings of brief pulses of sinusoidal radio frequency oscillations which died out rapidly to zero, called damped waves. The disadvantage of damped waves was that their energy was spread over an extremely wide band of frequencies; they had wide bandwidth. As a result they produced electromagnetic interference (RFI) that spread over the transmissions of stations at other frequencies.
This motivated efforts to produce radio frequency oscillations that decayed more slowly; had less damping. There is an inverse relation between the rate of decay (the time constant) of a damped wave and its bandwidth; the longer the damped waves take to decay toward zero, the narrower the frequency band the radio signal occupies, so the less it interferes with other transmissions.
As more transmitters began crowding the radio spectrum, reducing the frequency spacing between transmissions, government regulations began to limit the maximum damping or "decrement" a radio transmitter could have. Manufacturers produced spark transmitters which generated long "ringing" waves with minimal damping.
14 июн 2024
