Leather & Walnut Bluetooth Speaker

Подписаться 45 тыс.

Просмотров 86 тыс.

50% 1

I've been sketching bluetooth speaker box designs for a few weeks and finally found a design that I thought would look good. I just want to start off by saying designing speaker boxes isn't as easy as one might think. There's a lot that goes in to building a speaker enclosure and it's not as easy as just putting speakers in a box. With this build being a prototype, I did not follow any guidelines and didn't use any online calculators for the specs of the speakers (frankly I couldn't find the thiel specs for the speakers I used). I did not take that in to consideration when designing this box because, frankly, it's not really for music, but for podcasts and other light listening while in the kitchen or in my shop (when I move i to the garage). The box is 13 1/2" wide, 6 1/2" tall and 8" deep.
Check out detailed pictures here : www.simplecove....
Items used in the video(Amazon Affiliate help support my channel):
Fiebings Mahogany Dye: amzn.to/2bsDeRl
Hole Saw Kit: amzn.to/2bsDlw5
Boss 4" Speakers: amzn.to/2bv4top
Speaker Grill Cloth: amzn.to/2ckvLUr
Supre 77 Spray Adhesive: amzn.to/2bv50a8
Wood Glue: amzn.to/2c16Gtk
Dado Stack Set: amzn.to/2c16P02
10" Table Saw Blade: amzn.to/2bsCJ9B
--------------------------------
Help support what I do by buying a SimpleCove t-shirt! bit.ly/SCWoodwo...
--------------------------------
Tools I Use (affiliate):
www.amazon.com...
--------------------------------
See more projects like this on my website: www.simplecove.com
--------------------------------
Subscribe to my channel: / @simplecove
--------------------------------
Follow me on Social Media:
Instagram: / simplecove
Twitter: / simplecove
Facebook: / simplecove
Pinterest: / simplecove
--------------------------------
Sean Walker
PO Box 1502
Versailles, KY 40383

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 139

@atlantacrafted 8 лет назад

Nice project - just a few suggestions. The box MUST be completely sealed. No air leaks what so ever to get a nice sound. That big cord hole in the back and only securing with magnets prevents that. Also most speaker box builders will go over the joints with caulk, silicone, hot glue, even more wood glue to ensure no air leaks. Second suggestion, use contact cement and a brayer to apply the leather to the box. This way it will not matter if the leather has a few wrinkles, the brayer will smooth all of that out. It will also adhere much better and no need for using calls to hold the leather in place until it dries. With contact cement, once the two pieces meet, it's stuck. As for the sound quality, try out some different speakers. (Try them out before putting them in the speaker box) Make sure the speakers are compatible with the Amp. That plays a big part in the sound quality as well. I have a few of those amps and I know exactly what you are referring to, which is why I now build my own amps. With that said, you said it was a prototype, so good luck on your next build, and again nice project.

@andrewp.tucker3219 8 лет назад

It is a beautiful box. The real issue is the engineering design behind it. There is a whole lot more to speaker building than putting a couple of speakers in a box. I'd much rather have a crappy looking box that sounds amazing that a beautiful box that sounds like crap.

@atlantacrafted 8 лет назад

I started my comment by saying it was a nice project. I build speakers all the time so I am fully aware of of what goes into a project like this. Speaker building is not a big mystery. Once you understand the concept, you can make a speaker out of anything, so yeah it is as simple as putting speakers in a box, or whatever other object you may have, but it has to be done the right way, and there are infinite ways that can be achieved. Also in the video he said the sound quality was not so great which is why he would not recommend that board he was using, and also why I stated he needs to make sure his box is completely sealed, and to test the amp with speakers before putting them in the box. I have three of those same amps on my tinker table now collecting dust because yes they are crappy which is why I build my own boards from scratch. The minor issues he had with this build can be easily corrected which is what my aim was - just offering suggestions.

@Simplecove 8 лет назад

Andrew, thanks for the comment. This is the first of many speakers I plan on building, and just like anything new, you have to learn the basics. This box is mainly used for podcasts, which fits the bill. I've learned from building this box that there are things I will change in the future to make a better box, but overall, I wanted to experiment with a design because I can fix the other issues. An ugly box, I can't.

@Simplecove 8 лет назад

I appreciate the feedback! I found another bluetooth board that I'm going to try (The sure boards) which will fix that issue. The box being airtight is also another issue, like you mention. The back moves too much with only being held in by magnets.

@practicalguy973 7 лет назад

I have some experience with the bluetooth feedback issues. This is a ground loop feedback that happens when the amplifier and BT module are isolated to the same power supply. The Sure board might have a design that isolates it so that's good if it works. If you want to use the typical cheap Ebay stuff just get a amp board with no bluetooth and separate bluetooth board and make sure there is a second power supply, one for the amp and one for the BT board. I was having that issue and ended up buying a USB power bank to power my BT board and that worked really well. I then redesigned my speaker so that USB power bank can charge my phone and also runs the BT module.

@dpmakestuff 8 лет назад

Came out beauty!

@Simplecove 8 лет назад

Thanks Dustin!

@amogh1773 8 лет назад

Amazing! Leather looks great with Walnut wood However, things that I'd do differently - cut a deeper grove for the leather so that it doesn't sit flush with the wood - use a leather strap of slightly lesser width - place the leather strap off center, so that it's closer to the rear side - include an on/off switch on the rear panel

@craftedworkshop 8 лет назад

Awesome work, Sean. Definitely interested in doing something like this.

@Simplecove 8 лет назад

Thanks Johnny! I'm sure you will see more speaker work from me on here and instagram. Good luck with it man, it's a fun thing to make.

@Cactusworkshopchannel 8 лет назад

looks really cool! nice design :)

@Simplecove 8 лет назад

Thanks for watching Carlos!

@LivefreeanddiyTv 8 лет назад

I like it! Good work 🤓

@Simplecove 8 лет назад

Appreciate it!

@kalleklp7291 7 лет назад

I'd recommend sealing the box air tight, it simply gives a better sound. Also, I realize it's easier to build with professional tools, than just normal home tools. That beeing said it is an absolutely flawless build..! Great build quality and excellent craftmanship..! Btw, you can buy noise reduction filters on E-bay, that will solve the biggest part of that annoying feedback noise the amplifier has.

@rokero171 8 лет назад

The amp is a good amp, try a different power supply, or batteries...

@modustrial 7 лет назад

This is a cool design. I agree that some refinements would improve it. Definitely make version 2.0. one thought to improve this one without starting over - the only thing that really bothers me visually is the leather edges, which look rough. You could create two thin "picture frames" that wrap all the way around the speaker box, and cover the edges of the leather. If you did them in a contrasting wood, like maple, I think it would still be clean and modern, and they would also lift the box up and serve as a stand for it.

@Simplecove 7 лет назад

Thanks for watching. I agree, the leather should be hidden a little more and I think the easiest solution for the next version would be to make the groove deeper so the leather sits deeper. I like your idea of contrasting woods for the picture frame approach. That too would look good.

@TheWoodKnight 8 лет назад

Interesting use of mixed materials! On the 'controller' front, the speaker 'system' I've built uses a rasp pi + amp. No BT, but has wifi, uses Max2Play on the Pi for the software. Since I was too cheap to get an AIO amp+pi, it means two powerboards. This integrates well with Squeezebox server, though probably won't suit your needs so much.

@Simplecove 8 лет назад

Yeah I thought about using a Pi but I just wanted something quick and easy to just broadcast from my phone. I will be making more speaker boxes in the future though and will look into this. Thanks for watching.

@aleksandarberberic2511 7 лет назад

Nice design. Good workmanship. For stereo output you should have the left and right speaker in separate chambers, otherwise the sound will be muddled up. Also, you need an air tight chamber, otherwise the bass will be weak - that big hole on the back won't help, and neither will the magnetic back cover - unless you use bigger magnets and a rubber seal of some sort.

@RobinLewisMakes 8 лет назад

One day, many years from now maybe, the box will be opened and someone will exclaim, "this was built by a man with pride, for I see no squeeze out", and you shall be that man. Or you built it so well that it lasts forever, haha. Great video man, speaker looks fantastic!

@Simplecove 8 лет назад

LOL I hope! Thanks for watching, I appreciate the kind words.

@GuysShop 8 лет назад

Cool look and design Sean. Too bad the BT amp gave you problems.

@Simplecove 8 лет назад

Thanks, Guy! Cheap electronics never pay off but I guess I never learn lol.

@teapot619 8 лет назад

looks good. In the revised edition, if you are going for good quality, use some 45 degree pieces in the corners to help bounce air and for structural support. also look at running a bead of silicon around all the joins inside to air seal it, and maybe mount the amplifier so that only the power socket is visible from the outside, rather than have a gaping hole that the power runs through to stop air escape. Nice build and I love the contrast between the colours.

@sdmcustoms 8 лет назад

that's great I've never seen inlayed leather like that before. it's a really cool look ,nice one

@Simplecove 8 лет назад

Thanks man, appreciate it!

@delcambekevin 8 лет назад

Hi, very nice speaker and video +1like. I used the same module on a used Bose speaker that I had laying around connected to a lead 12v 2.2a battery and I must say that I maybe had expected more of it, but you have to be honest for only 9 € (10.03USD) delivered FREE to my doorstep from China! I wont complain. The ease to take my speaker to my work and use it when ever where ever in just 5 secs. also it is efficient. I've been using it 4 days straight without charging it and stil is going strong. Anyway If you find a better amp please share some links I want to build a bigger speaker for our backyard. Greets.

@Simplecove 8 лет назад

Thanks Kevin, I will share any info I find in the next speaker build video. I plan on making a couple more with different designs.

@MattDiresta 8 лет назад

very cool! love the "Making it" shout out! looks really coool man!

@Simplecove 8 лет назад

Thanks Matt!

@jshug1103 7 лет назад

Try rounding the edge on the speaker holes so the fabric doesn't show the edge so much. Looks great though!

@SawDustMakerRJM 8 лет назад

The speaker box really looks nice. Maybe use some spline joints next time.

@Simplecove 8 лет назад

Appreciate it! I may give splines a go next time. Or maybe biscuits.

@simonaarekol3336 7 лет назад

There is a video about this feedback. If i'm not that blonde, then that amp is a dayton audio bt amp. Not shure how many watts though.

@simonaarekol3336 7 лет назад

I think the video is calles "the best diy bluetooth kit" or sumthin. Feel free to delete this comment. It was just a, y'know, just to let you know how to get rid of the feedback. He is showing it on a different board, but merely the color is different

@ClandestineWoodwork 8 лет назад

The noise you're getting is probably interference from electrical fields. Are your speaker wires shielded? That's usually the culprit.

@jshug1103 7 лет назад

I normally use a drill and wind all my wires. Not sure how much it helps but makes it look cleaner I think.

@donnymcarter 8 лет назад

Nice looking project and design Sean!

@Simplecove 8 лет назад

Thanks Donny!!

@BruceAUlrich 8 лет назад

It looks great! I really like the leather and walnut together. I kind of like how the leather has scars and wrinkles in it. Makes it seem more real. So, when you say you want to cut the groove deeper and use thinner leather, you want there to be a little reveal after you're done with the inlay? The vintage looking plate on the back was a nice touch.

@Simplecove 8 лет назад

Thanks Bruce! Yeah I want a little reveal. I found the leather edge to show just a tad in areas where the edges weren't perfectly clean. With a little reveal, I think it would look good and hide it better.

@BruceAUlrich 8 лет назад

Yeah, I can see that. Or at the very least, go through the burnishing steps for the leather edges like you do for other leather projects. Then, if the side showed, it wouldn't matter. Oh, and you should have stamped your Simple Cove into there. ;)

@Simplecove 8 лет назад

+Bruce A. Ulrich these are both great suggestions. Damn, I should have stamped my logo too. Good call. Next time I will! Thanks

@officialjoeynguyen 7 лет назад

Is it possible to change the device name of the Bluetooth Amp?

@rascalwind 7 лет назад

It might be one of the wires on the input jac (aux in) acting as an antenna on the amp.

@philiperrendesign8362 6 лет назад

Cool Design!! Very clean

@Shopcat22 8 лет назад

Oh man, that is gorgeous.

@Simplecove 8 лет назад

Thank you!

@thatguythatdoesstuff7448 7 лет назад

The noise you're getting is very likely ground loop noise. For some reason, the BT integrated boards are more susceptible. Try powering with batteries. If the noise goes away, then you know it's 100% related to ground loop. Then, search YT. Plenty of videos out there with ground loop iso circuits that you can add to the box.

@Simplecove 7 лет назад

Thank you, I will give that a try!

@carllandry5079 8 лет назад

I purchased the same Bluetooth board and had the same noise that sounded like feedback. I soldered a small 24 gauge wire to the Bluetooth antenna. The buzzing stopped. Test with an alligator clip. If the clip reduces the buzz, try soldering a wire

@Simplecove 8 лет назад

Appreciate the tip. I for sure will give it a try.

@MakingStuffco 8 лет назад

I want to make some speakers!

@Cancun771 8 лет назад

Band clamp will make it easier to square it all up. Also you can get convertible clamps that are easily reversed to form spreader clamps, would have come handy for the inside reinforcements. (aren't there some of those lying around on the work bench? ;-) Nice touch there with the shellac. If not pressed for time, I'd maybe stick with the same leather but try to wet it, bend it around the corners and let it dry to that shape before glueing it on. There are some Diresta videos with that technique,

@Simplecove 8 лет назад

Thanks for watching the video and for giving me feedback, I appreciate it. I could have used my irwins but I was being lazy and super glue did a good enough job for me lol. That's an excellent idea about wet forming the leather. I will be trying that next time for sure. Thanks for the tip!

@MrTauron77 7 лет назад

Ez a Bluetoot hangfal nagyon szép munka, egyszerű, elegáns, semmi fölösleges "giccs" nincs rajta.

@HugoHugunin 8 лет назад

To make the front plywood less visible, I would try painting it black to "match" the holes and make it less visible.

@Simplecove 8 лет назад

Thats a good idea. Thanks for watching!

@marcoburgers4124 8 лет назад

Should have been sealed and could have had poly fill to reduce standing waves. That hole in the back will make the box have a weird resonance which may create distortions. Otherwise nice design and woodworking!

@Simplecove 8 лет назад

Marco, I totally agree. I made plenty of mistakes but have learned along the way. I plan on making another revision with better plans. Another big mistake I made was by making the back panel removable. It rattles when I have the speaker turned up. Thanks for taking the time to comment. I read all of them.

@megaman616 7 лет назад

wasnt the speakers the problem?

@attpureownpk 8 лет назад

wrong speakers for this amp. you need a different type to not heat the hum or buzz. which is the speakers sensitivity or noise floor of the unit. get less sensitive speakers and you will notice a huge difference.

@Simplecove 8 лет назад

Thanks, I will look into replacing the speakers.

@AnthonyRamosHiFiWiFi 8 лет назад

I have had really good luck using Sure Bluetooth and Amp boards. They are a little more money but I have to say that are a TON better then any of the cheap ones you get from amazon or ebay.

@Simplecove 8 лет назад

Thanks for the suggestion. I will check them out!

@lars-sorensen 8 лет назад

I've been soon close to order that amp many times. Too bad about the quality. Also it would be nice to set a custom bluetooth name. Please let us know if you find or are being directed to a better bluetooth amp.

@Simplecove 8 лет назад

Sure will. Follow me on instagram where I post more behind the scenes stuff and thats where I will post my findings on bluetooth amps. Thanks for watching!

@DeathToTheseWalls 8 лет назад

The only thing I would do differently is find some way to mount the power cable to where it exits from the box. Just having a hole where cable can be pulled in and out is less than ideal.

@Simplecove 8 лет назад

The next speaker will probably have an external amp and the box be completely sealed up.

@FYahooo 8 лет назад

Where did you get the miter fence?

@ranjdall 8 лет назад

Nice design. Lots of potential for different color combos and textures when adding leather in the mix

@Simplecove 8 лет назад

Thanks Randall!

@amberstrickland5464 Год назад

Can I make my own doors?

@cbr1thou 7 лет назад

dont use boss crap. wtf

@tooljunkie555 8 лет назад

good stuff sean. i like the look. i hate when electronics dont work the way they should.

@Simplecove 8 лет назад

Thanks Joe! Me too. Damn things should work as advertised.

@tooljunkie555 8 лет назад

+Sean from SimpleCove ik right! they never do.

@TheNidzhat88 8 лет назад

good job. looks awesome. I think that you need your own logo on the front of this speaker

@Simplecove 8 лет назад

Thats a really cool idea. I may have to do that on the next speaker I make. Thanks for watching!

@HNIZAR45 8 лет назад

nice work

@Bakalaenlaaguja 7 лет назад

Name of amplifier??

@patrickregis1 7 лет назад

I like your video, especially your feedback on what could have been better. It's rare and valuable !! The vintage look appeal to me.. You might have add some vintage analog Vu meter.... Did you get a better Amp board ?

@mihumus 8 лет назад

Very nice project, looks great!

@Simplecove 8 лет назад

Thank you!

@Conservator. 8 лет назад

Great build and inspiration! Tx! I think you could significantly improve the lower bass response by adding 1 or 2 passive radiators. You could even fit them on this 'prototype' on the back panel.

@alindanielepure819 8 лет назад

hey, for the noise you need to put 2 crossover to divide the signal from low to hight.

@krzysztofkasperek6715 8 лет назад

he need different amp, i have this one and quality with crossovers isn't good, buy amp and bluetooth receiver from sure electronic ;)

@alindanielepure819 8 лет назад

+krzysztof kasperek mine is perfect. you need to see the speakers om to decide which one is better

@krzysztofkasperek6715 8 лет назад

i have JBL driver and use 2 types of crossovers and still this noise

@attpureownpk 8 лет назад

it isnt the om as described from Alin. it is actually the noise floor. i have the same amp and the speaker sensitivity is to high if you are hearing the noise. google it and it will make more sense.

@dexterx9862 7 лет назад

was it wood glue you used for the leather? how did that work out in the end?

@Simplecove 7 лет назад

Yeah regular yellow wood glue. It's worked great. Still holding up just fine.

@Potato22 7 лет назад

XSCORPION (GC-3LS) is leather?

@Simplecove 7 лет назад

+Potato22 no it's cloth

@DotaN00b 8 лет назад

Good looking , clean build . Nice job there

@Simplecove 8 лет назад

Thank you!

@smnhpkns 8 лет назад

really neat mate, well done

@Simplecove 8 лет назад

Thank you!

@supercheekykiwi 8 лет назад

keep up the good work

@Simplecove 8 лет назад

Thanks!

@Thanson199415 8 лет назад

that's it? for a sound test? what the fuck man

@Simplecove 8 лет назад

I'm not sure how well the sound will portray coming through the camera so that's why I didn't do a sound test.

@tizchill5329 8 лет назад

wtf @@

@eduardobarros1168 8 лет назад

maneiro!!!

@iqlogic 8 лет назад

3:37 Nice project but these holes for speakers are way big :/

@marcintolas572 7 лет назад

luv the design, perfect colour match on fabric and wood

@KD0FKE 8 лет назад

should have used contact cement. I use weldwood high temp for leather work.

@Simplecove 8 лет назад

Why when wood glue works just fine? I wasn't in a hurry to glue the leather down so I opted to use what I had on hand.

@KD0FKE 8 лет назад

Because it's the proper glue to use. You don't use wood glue to bond plastic to plastic. I have over 10 years experience in upholstery. and have never considered using anything other than that for that specific application. Read the labels of the glue you are using and match the type of what you are glueing together. Sure it may last but you may have problems in the future. The leather will change it's shape due to temperature, or humidity slightly at a different rate than the wood.

@Simplecove 8 лет назад

Thanks. I will use this piece as an example to see how it reacts over the years as there's nothing I can find that says the glue will fail.

@howardmcewen 8 лет назад

Great project! I'm curious: What is the drill attachment at 5:39?

@Simplecove 8 лет назад

My drill didn't come with a chuck so I had to buy a removable chuck. That's what that gadget is. Bulky but works. Thank you!

@howardmcewen 8 лет назад

Thanks. Subscribed!

@Simplecove 8 лет назад

Thanks Howard, I appreciate it!

@MarshallSmith27 8 лет назад

its beautiful. simple as.

@Simplecove 8 лет назад

Thank you

@andii1701 8 лет назад

Cool build!

@Simplecove 8 лет назад

Thanks Andrew!

@KSFWG 8 лет назад

Nicely done, Sean! Reminds me of some 200+ year old fine English boxes I once saw on display at a museum in Kansas City. The lid panels of some of the boxes were leather covered and still in amazing shape for being so old.

@Simplecove 8 лет назад

Thank you! That box sounds really cool. Its awesome that it was in such good shape for the age

@marliedpahltr6574 6 лет назад

Great job briliant idea :]

@mikewest712 8 лет назад

subbed bro.

@Simplecove 8 лет назад

Thanks!

@lukedorny 7 лет назад

Found this project again. Watched it again. Love your design ideas. I'm hoping you do more projects like this. Love your eye for finishing. Keep it up.

@lukedorny 6 лет назад

Ha! Came upon it again. Watched it again. Cheers.

@lukedorny 4 года назад

Came upon this video again, watched it again. Very cool project. You should make another one. Cheers.