Yest its the same with the lee APP priming press, you need about 106 to 110 primers to get the full 100, but the APP primer feed tube has a notch cut out to almost the bottom so you can use a small piece of wire to pull the last few primers in position on the APP press. I will post a few more videos in a few weeks, one on the Lee Six Pack, and one on the APP press. Have a great time reloading and stay safe !
There are 4 things that you can do to adjust for case feed travel, 1- the plastic slider that the case drops into has two holes for the silver arm, the rear one will give you the most travel. 2- the mounting screw on the frame moves in and out ( but not by much ) to move the rod in closer. 3- the black plastic piece that slides up and down on the rod needs to have the right tension or it will stop driving the case and just slide up the rod. 4 I've had to tweak the rod that comes up from the frame just a bit by tapping it with my palm just enough to give me the travel I needed. Hope that helps ! Stay Safe!
