No video :(

Leopard 2830 1290Kv Brushless Motor Bench Test • LOVE These Leopard Motors • [The Judge Ep. 13]

Подписаться 38 тыс.

Просмотров 4,1 тыс.

50% 1

This is the rcvideoreviews.com power and thrust test of the Leopard 2830-9T 1290Kv Brushless motor.
This video is sponsored by Altitude Hobbies who provided the Leopard Motor for review. Altitude is my go-to source for Leopard motors and now Lemon DSM compatible receivers. Make sure to give them a look if you want to give one of these Leopard motors a go.
Altitude Hobbies:
altitudehobbie...
Leopard Motor in Video: www.altitudeho...
Lemon 6ch Rx:
www.altitudeho...
T-Shirts: teespring.com/...
RCVR RC Gear and Consumables
Gear
ISDT T6 Charger www.banggood.c...
ToolkitRC M8S www.banggood.c...
ToolkitRC WM150 Watt Meter amzn.to/2A13Ogu
Generic Watt Meter amzn.to/377epmg
KaCallap LiPo Discharger amzn.to/3khIAxk
Solder Station Heavy Duty Helping Hands: amzn.to/32WInJN
ZTW 10a peak/6a cont BEC 6v/5.5v/5v: amzn.to/2ZdAA6S
ZTW 40a ESC with XT60 Installed: amzn.to/3fPu2ll
ZTW 60a ESC with XT60 Installed: amzn.to/2CqrNGH
ZTW Programming Card: amzn.to/2BuHZqb
MG90s 9g Servo 5 Pack: amzn.to/315Kmuh
ISDT LiPo Balance Checker: amzn.to/2Z0HOee
Generic LiPo Balance Checker: amzn.to/3drCO7B
FrSky S6R Rx with Stabilizer: amzn.to/320IrHU
Consumables
10 Pack XT60 Connectors with shrink tube: amzn.to/2zVBWdB
50 Pack 3.5mm Bullet Connectors: amzn.to/3dw8pot
10 Pack 300mm Servo Extensions: amzn.to/3dVBRoi
Heat Shrink Tubing: amzn.to/3ezjIxB

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@davidknutz3314 4 года назад

You know I’m a huge Leopard Motor fan. I also like the Value Hobby motor. I use both. I tend to lean more to Leopard because I feel it’s going to have a longer lifespan.

@RCVideoReviews 4 года назад

Leopards are a top shelf motor. I'm not sure how big or small a following they have but I don't see or hear people at the field talking about them which is a shame. They're missing out. Good to hear from you. Thought you dropped off YT for a while...

@davidknutz3314 4 года назад

RC Video Reviews I’ve been watching but my work has me traveling everywhere and working nights then days, so I’ve also been trying to catch up on sleep, LOL. I’ve been leaving 👍 for ya though.

@Dochorahan 3 года назад

Leopard motors are great! They had the best option for my Sig Senior 2m wingspan. I considered axi, hacker, scorpion, eflite, but the leopard was the best specs wise for my application.

@RCVideoReviews 3 года назад

I love Leopard motors. They've always performed to spec and they're affordable.

@spindash64 4 месяца назад

@@RCVideoReviews They certainly managed to grab a heck of a brand name, too.

@marinrealestatephotography 4 года назад

Just looked up your sponsor (Altitude Hobbies) and discovered that they sell Lemon receivers. Good to know since I heard there is a LOOOONNNGGGG delay getting receivers from Lemon directly from China.

@RCVideoReviews 4 года назад

Lol, you gotta watch this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Jfxmw--1Brg.html

@enriquekramer4590 4 года назад

Looking forward to the Sabre video! I bought the Wargo MX2 due to your comments on the HK version of it... Hope I made a good investment.

@RCVideoReviews 4 года назад

I don't think the Wargo version is EPP...? Don't worry, the MX2 acquits itself well.

@jeffrey8004 3 года назад

Hi John. excellent review, many thanks. However, I have a question. Both the props you tested gave an amp reading well above the safe limit of 18a. Granted they were tested in the open air, but how would that compare with fitted in an airframe? I have a Skylark S, same as an earlier review of yours, which I plan to run on 3s with a 9 x 5 GWS prop. Do you think this motor would be suitable? Thanks jeff

@RCVideoReviews 3 года назад

Motors are a little less sensitive to amps than things like ESCs. This one saw 23a against a peak of 18a, but that was also a static test. Dynamic current (in flight) will be lower. Even if it only dropped 2 or 3 amps in flight, going one or two amps over peak isn't going to hurt it. Especially since the moment you start using battery the maximum current will decrease. This motor would be good in a Skylark.

@tamaman1559 4 года назад

Hey John, excellent review bud and nice little motor,... what is your setup that you found to be happy with so far, ESC, servos, receiver etc.. for the MX2,.... was trying to go back in your vids but didn't see your actual complete hardware list for the plane... Looking to pick one up myself,.. thx... Cheers!!

@RCVideoReviews 4 года назад

On the MX2 I have Generic 9g Towerpro Servos, a ZTW 40a ESC and a Turnigy 2830 1100Kv motor, and an old 4 Channel FrSky park fly Rx. I'm going to shift some things around though. The Leopard will go in the Saber. The Lemon Rx will go in the MX2.

@tamaman1559 4 года назад

@@RCVideoReviews Nice!... ya looking to pull the trigger on this plane after your review,.. friggen back ordered as usual,... didn't want the Wargo, as I believe its foam covered balsa...Need a nice basher too......and ez patchwork if that lol! Enjoyed watching you putting it through its paces though, as I'm not a 3D guy either.....yet ;D..... Def picked up a lot from you bud, .. very cool plane....thx J! How's that turnigy 2830? good or eh? let me know ... Cheers!

@RCVideoReviews 4 года назад

@@tamaman1559 The MX2 is a great little plane to start learning 3D techniques--no doubt about it. I do things with that plane I'd never do with a balsa plane. Dave chuckled a bit at the stuff I was doing last time at the field with that one. Turnigy is ok, I used it because I had it. Get a Sunnysky or Leopard.

@tamaman1559 4 года назад

@@RCVideoReviews If I go leopard, what size would you recommend/ , I usually always like more power than less ,..

@RCVideoReviews 4 года назад

@@tamaman1559 The one in this video would be good. 2830 1290Kv. It made 266w on 23a. That'll give you 221w/lb which is more than enough.

@easy_3d 4 года назад

You make great videos...thank you very much...but i haven't seen your face till now in any video..you are like the invisible woman owner from tom and jerry....😄😄

@RCVideoReviews 4 года назад

Yup

@graymatter45 4 года назад

I like the leopards too. Hey I have a question. I bound my Aeroscout(DSMX)to my TX16 and I don’t think I lost the signal, but Amber is complaining that RSSI is low or critical. Do I have a setting wrong? Again, I think I had control of my plane the whole time. Thanks for the TX16 videos, they’re very helpful.

@RCVideoReviews 4 года назад

One of the problems using receivers outside of their (tx) ecosystem is the interpretation of RSSI. There are four things I would suggest: 1) Google for the expected range of RSSI on the TX16s for your specific transmitter. You're probably not the first person to encounter an issue. 2) Google to find out if RSSI is the primary signal strength metric for that Rx and the TX16s. I've found on FlySky for example the primary indicator of signal strength is RQly. 3) Look into fine tuning the frequency for you Rx. I've tried it on a handful of FrSky Rxs and have not been able to improve RSSI over the unmodified values, but the code is in the firmware and it is suggested to try. 4) Perform a range check and make sure the range check operates as it should.

@graymatter45 4 года назад

Thank you for the reply. I will try those things

@RCVideoReviews 4 года назад

@@graymatter45 Let me know what you figure out.